Racks, Ready to Ship
-
Floating Foam Tube Racks
Heathrow ScientificFloat in small baths as well as large vessels Brightly-colored, high-density polyethylene foam racks are ideal for floating tubes in water baths, tubs, or beakers. Closed-cell foam resists water absorption so racks can be washed and reused. The blue round rack features unique…
-
These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…
-
These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…
-
Well Plate Stand
Diversified BiotechA convenient holder for a microplate, tilted at a 30° angle to comfortably view samples and pipette without strain. Each stand has a neoprene pad and rubber mounting to prevent slippage of the plate and stand.
-
Test Tube Supports
DynalonTest Tube Supports for 10, 13, 16 mm tubes. Acrylic units have clear shelves with white sides and bases.
-
Conical Tube Holder
SP Bel-ArtMove tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.
-
Wire Drying Rack
Heathrow ScientificSaves glassware from chips and cracks Drain and dry test tubes, beakers, flasks, and other labware. Place selfstanding rack on a table or near a sink. Or, use hooks to hang rack on the wall. Holds up to 90 pieces of labware on eighteen 127 mm pins and seventy-two 76 mm pins. Constructed of…
-
Rotating Wash Bottle Holder (H0382): Stay mobile with the Rotating Wash Bottle Holder; The sturdy handle provides comfort and control; Holds bottles up to 3” in diameter; Polycarbonate construction Rotating Two-Tier Lab Station (H0381): Holds up to four wash bottles; Rotates 360°…
-
Unwire Polycarbonate Test Tube Racks
Thermo Scientific NalgeneUsable in cold rooms and at subfreezing temperatures Racks can be used in water baths, as they do not float Similar to 9259S10 series, but constructed of polycarbonate. Racks’ upper two shelves and handles are clear; the bottom shelf is opaque. Can be autoclaved occasionally, but repeated…
-
Fits 0.2 mL tubes on one side and 0.5 mL tubes on the other 96 wells per side in 8 x 12 format Every well numbered Custom molded Includes secure fitting lid
-
Drying Rack
DynalonThis sturdy stand is fabricated of 3/8" clear acrylic adding style and function to a normally wall mounted rack. The 4.5 lb stand includes all hardware needed to attach to the 5918-0000 drying rack and also comes with a 5' section of our 1085-0012 vinyl laboratory tubing. Further,…
-
TUFFBLOK™ 4-Way Interlocking Tube Racks
Globe ScientificLink multiple racks together for a custom rack solution Autoclavable polypropylene (PP) Heavy-duty construction is durable and chemical resistant Multiple colors available for benchtop organization at a glance Numeric markings for sample identification Versatile design accommodates…
-
BioTube™ Rack
SimportMade of polypropylene. The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base of…
-
96 Wells 0.2 or 0.5 mL tubes Alphanumeric grid Specifically designed for PCR research, this 96-well rack holds either 96 0.2 mL PCR tubes or 96 0.5 mL style microcentrifuge or PCR tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes.…
-
Round Floating Microtube Racks
Thermo Scientific NalgeneFor incubating in baths or vessels at elevated or reduced temperatures (-70° to +100°C) White, polypropylene racks that float, but suspend entire microtube in liquid Built-in handle and legs for easy handling in bath or on bench Autoclavable racks take 1.0, 1.2, 1.5 and 2.0 mL tubes. 2591C36…
-
Rotating Wash Bottle Holder (H0382): Stay mobile with the Rotating Wash Bottle Holder; The sturdy handle provides comfort and control; Holds bottles up to 3” in diameter; Polycarbonate construction Rotating Two-Tier Lab Station (H0381): Holds up to four wash bottles; Rotates 360°…
-
Funnel Support Rack
Accurate WirecraftAdjustable shelf will accommodate a variety of funnel lengths and flask or beaker sizes. Rack is constructed of vinyl-coated heavy gauge wire. The rack holds twelve 2" to 4" diameter funnels. Dimensions: 16.25" H, 25.375" W, 10.75" D
-
Scienceware® Poxygrid® B.O.D. Bottle Rack
SP Bel-ArtThese racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)
-
PCR Tube Racks
NEST Scientific USAFit for 0.2ml tubes and strip tubes and 96 well plates Easily stackable to save space Transparent Polycarbonate lid for easy well identification Polypropylene racks can be autoclaved
-
CoolRack® and CoolSink™ modules
Azenta Life SciencesBioCision® thermoconductive modules provide reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they…
-
Full-View Test Tube Supports
SP Bel-ArtHold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…
-
The 4-Way Flipper benchtop storage system combines four racks in one. Designed to support a variety of tube sizes and styles, each rack can be rotated to any of the four sides to support different size centrifuge tubes. Their rugged polypropylene construction allows them to be autoclaved, placed in…
-
-
96 Place Reversible Racks with Covers
Globe ScientificProduced from polypropylene (PP) Autoclavable Excellent rack for benchtop use or freezer storage. Excellent chemical & temperature resistance 96 Well rack capacities - 96-place for 1.5 & 2.0mL tubes - 96-place for 0.5 & 0.2mL tubes 96 Well…
-
Tube Racks
MTC BioMTC Bio’s benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. No. R1030 is a 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is…
-
Interlocking 20-Place Tube Racks
Heathrow ScientificAttach several racks for large experiments Heavy polypropylene construction Glove friendly Hold 1.5/2.0 mL tubes Racks slide together on both sides. Internal ribbing make racks stable and sturdy. The “Hold-It” finger slot on the front of the racks allows racks to…
-
Stainless steel rack for holding hot COD vials or test tubes prior to reading. Fit Hach COD vials and Test 'N Tube vials. Vials not inlcuded. Hach products are intended for sale/shipment within the US only. International customers should contact their local Hach distributor to place…
-
Low Temp 96-Well PCR® Racks
Heathrow ScientificThe PCR Storage Rack, by Heathrow Scientific, offers a sleek and modern design that’s packed full of features. The patent pending design offers a unique lid the rack slides out from, and then rotates 180°, to become a convenient stand the rack sits on. Ergonomic textured finger grips…
-
Thomas Spilltray And Drying Rack
labForce® (powered by Thomas Scientific)Eliminates spills Easy to clean Unit is dishwasher safe Plastic grid cushions and protects against breakage and scratches. Grid cuts drying time in half by promoting air circulation. Rack measures 16 1/2” x 13” x 5/8” and weighs 1 lb.
-
Unwire Polypropylene Test Tube Racks with Handles
Thermo Scientific NalgeneNon-scratching Empty racks can be stacked Tube-centering depressions in bottom shelf are perforated. The hole rows have molded-in numbers and letters. Not autoclavable. All racks are 115 mm wide x 95 mm high.
-
96-Well Reversible Rack
Heathrow ScientificEasy-to-grasp tabs for sample handling and storage Flip polypropylene rack from 96 wells for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are…