Test Tube Drying Rack

…polyproylene racks can conveniently hold inverted tubes for drying and minimize collection or airborne contaminants. Racks can also be used to hold and dry electrophoresis and chromatography plates. Autoclavable. The 96 place rack features an 8 x 12 array of pegs that hold test tubes up to 13mm in…

Economical yet very durable racks that are submersible, autoclavable, and easily stack when empty.  Made from a special blend of polypropylene (PP) that makes them sink in a water bath and maintain their stability, even in agitated water.  The top tier features an alphanumeric grid…

Saves glassware from chips and cracks Drain and dry test tubes, beakers, flasks, and other labware. Place selfstanding rack on a table or near a sink. Or, use hooks to hang rack on the wall. Holds up to 90 pieces of labware on eighteen 127 mm pins and seventy-two 76 mm pins. Constructed of…

This polyethylene rack will hold six test tubes, and has six drying pins. Sides are fully open for clear viewing. Rack has two 30mm and four 20mm holes, and is pre-assembled.

…Lab-Aire® II Drying Racks a practical solution for drying and storing labware. All models come with three size and length rugged V-channel pegs that can be moved and repositioned to hold a variety of labware, including beakers, flasks, bottles, test tubes and cylinders. Additional…

For high-visibility, this 6-place high-density polyethylene rack is end-supported by two columns. Top plate has 25 mm diameter holes; base has corresponding hemispherical wells Includes six vertical pins for tube drying Easy snap together assembly

…viscometer tubes with a jet of solvent. At the touch of a button, the solvent stream is cut off and an air jet is directed into the tubes for drying. Cleaning is equipped with pressure regulator with external adjustment and air pressure gauge for regulation of airflow. Six movable draining racks…

…This durable drying system is made from high-impact polystyrene (HIPS) to provide a sturdy structure for draining plastic and glass labware. The pegs can accommodate items with a neck bore in excess of 15mm. Optional smaller pegs are available for small diameter items such as test tubes. This system…

Wet/Dry Test Tube Racks. Polypropylene. These racks provide excellent stability with no tendency to float or move in circulating water baths. An alpha numeric grid reference on the top tier enables precise location in the rack of particular samples. Available in three colors (white, red and blue)…

Test tube racks are excellent space savers and can act as an extra pair of hands in the lab. There are 6 holes to hold tubes, as well as 6 pins for letting the tubes dry. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, which are known to the State…

…drip trays, drain shelves or funnel racks. Measures 762 mm x 762 mm (30" x 30"). Other sizes are available on special order. 9275L80 same as 9275L15, but with full-width drip trough along bottom edge which has central, stainless steel tubing connector, 3/8" o.d., for connection…

…with up to 76 peg locations to hold glass or plastic labware such as beakers, flasks, bottles, test tubes and cylinders. Two removable polyprobylene baskets can be used for bulk rinsing, drying, transport and storage of small labware and extra pegs. Dryer Pegs are available in three lenths,…

Color Comparison Tests Just Became Easier Colors stand out against the white surfaces of this polypropylene rack making color comparison tests easier to read. Useful for drying or storing test tubes Holds six, 25mm or eight, 18mm tubes; includes six drying pins Steam autoclavable…

Six 25mm holes, six drying pins, with a 1/2" thick base. Solid hardwood construction. Polished to minimize damage from spills.

Two-tier rack with thirteen 25mm holes, and six drying pins Solid hardwood construction Polished to minimize damage from spills

…More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying and…

…spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x 12. 9260B25 and B37 racks are 17 mm with an…

This circular 12 place Polypropylene test tube stand has four 25mm diameter holes and eight 19mm diameter holes. The base has matching wells and 16 drying pins surrounded by a trough to catch drippings. Pre-assembled.

Can be used upright or flat on table, in sink or hung on wall Spot-welded steel wire coated with Neoprene, with removable, galvanized iron drain pan Has 18 nylon-coated pegs 127 mm long x 11 mm o.d., spaced 76 mm apart and 72 pegs 76 mm long x 9.5 mm o.d., spaced 38 mm apart. Pegs…

Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…

…Rack. Test Tube Spindle Conversion Kit includes 6 spindle rows with 8 spindles per row and a supportive base. Requires Test Tube Holder Insert 4574700, 4574800 or 4574900. For use in Labconco Lower Spindle Rack. 24 Pipette Insert securely holds up to 24 pipettes vertically to clean and dry…

… Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes. Spacious peg design allows easy viewing of tube contents. User can also turn tubes upside-down and use as a drying rack! Fiberglass reinforcement keeps pegs stiff and straight…

…Rack. Test Tube Spindle Conversion Kit includes 6 spindle rows with 8 spindles per row and a supportive base. Requires Test Tube Holder Insert 4574700, 4574800 or 4574900. For use in Labconco Lower Spindle Rack. 24 Pipette Insert securely holds up to 24 pipettes vertically to clean and dry…

…Rack. Test Tube Spindle Conversion Kit includes 6 spindle rows with 8 spindles per row and a supportive base. Requires Test Tube Holder Insert 4574700, 4574800 or 4574900. For use in Labconco Lower Spindle Rack. 24 Pipette Insert securely holds up to 24 pipettes vertically to clean and dry…

… Matrix tubes, tube racks and covers are made from polypropylene copolymer and are recyclable in communities where polypropylene is recycled. Please recycle only clean, dry components that have been decontaminated of any hazaRDO™us materials or residues. The orange nylon rack latches must…

…storage tube is leak tested to ensure the integrity and security of samples Storage Tracking Solutions for Any Laboratory Glass tubes can be used for storing samples in DMSO, chlorinated solvents and other harsh chemicals and applications where newly synthesized compounds that need to be dried down…

…Liquid Sample Instrument Platform contains the following items:  timer, two block dri-bath 110V, 12.75mm dri-block insert, vortex 110V, 13mm test tube rack, 10-100µL pipette PDP, 100-1000µL pipette PDP, 15mm dri-block insert, 20mm test tube rack, SafTest analyzer, tube rocker 110V.

… Each Liquid Sample Instrument Platform contains the following items:  timer, two block dri-bath 110V, 12.75mm dri-block insert, vortex 110V, 13mm test tube rack, 10-100µL pipette PDP, 100-1000µL pipette PDP, 15mm dri-block insert, 20mm test tube rack, SafTest analyzer.

…Undercounter Glassware Washers feature upper and lower open racks and can accommodate a wide range of requirements. New improved units feature a soft touch controller, improved drying, a quieter run, and are compatible with existing racks and accessories. Engineered for reliable and energy efficient…

…Freestanding/Mobile Glassware Washers feature upper and lower open racks and can accommodate a wide range of requirements. New improved units feature a soft touch controller, improved drying, a quieter run, and are compatible with existing racks and accessories. Engineered for reliable and energy…

Dry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all) hold…

…ID Tubing (1177K42): Ampule Pod made of polypropylene base has (15) 1/4" ID tubing ports each with silicone tubing, 15 plugs, 2 each clamps and 1 straight stainless steel adapter. Used for freeze drying ampules. Adapter attaches to port on Freeze Dryer. Ampule Pod, 1/4" ID Tubing…