Introducing New and Improved Stretchease® Disposable Nitrile Gloves!                                   The most comfortable,…

Xtraclean XC8614 Cleanroom Lab Coats are made from heavyweight SMS (spunbond meltblow spunbond) non-woven fabric. These breathable lab coats provide good air permeability, protecting against light fluid contact and particles, while offering comfort to the wearer. Low-lint SMS is a clean barrier…

These XtraClean non-skid shoe covers are ideal for a variety of floor surfaces, including tile, coated concrete and epoxy floors. The seamless bottom design is ideal for wet environments and maximum non-skid performance. Features:   Welded…

Safely handle broken glass Featuring NEW Carry Handles! Sturdy corrugated cardboard 2 mil thick polypropylene liner Two models: Bench and Floor Keep the lab safe with Thomas glass disposal boxes. Constructed from rugged corrugated cardboard and supplied with a 2 mil thick…

XtraGrip™ Premium shoe covers offer exceptional skid resistance and durability for both dry and wet conditions. Featuring a superior liquid resistant fabric, these seamless bottom shoe covers are low linting and resists delamination. Made of a strong, high tack polyethylene coated material.

Printed Graduations (with marking area) New clearer polypropylene copolymer High centrifugal strength - up to 15,000 RCF Flat markable cap with seal Phenol / Chloroform resistant DNase, RNase and pyrogen free

Concentration: 5u/µl Recombinant Taq DNA polymerase Supplied with a 10x NH4 Reaction buffer containing 1.5mM MgCI2 (final concentration)

safeForce ® procedure masks combine high breathability with exceptional filtration efficiency, while offering fluid resistance against bodily fluids and others. This 3-layer pleated mask is hypoallergenic and features an adjustable nose piece and non-latex earloop for easy donning and…

Choice Taq Mastermix is a 2X reaction mixture. It is ready-to-go and it only requires addition of template, primers, and water. Choice Taq Mastermix diminishes the amount of time needed to set up reactions, thereby reducing the risk of contamination. Greater reproducibility is also ensured by…

Concentration: 5u/µl Recombinant Taq DNA polymerase Supplied with a 10x NH4 Reaction buffer containing 1.5mM MgCI2 (final concentration)

Choose from four styles - 25 mL Divided, 25 mL , 50 mL and 100 mL “V” bottom design allows for maximum recovery of reagents Graduated with convenient pouring spouts at all four corners Extra wide base for increased stability Unique “Nesting” feature makes separation of…

The CE-Force Advanced I5 disposable shoe covers are ideal for pharmaceutical manufacturing, research facilities, GMP sites, labs, cleanrooms or other clean environments requiring a foot barrier. They are made of a proprietary fabric that offers an excellent balance between strength, anti-skid,…

Used frequently for preparation of thin, uniform sections of fresh tissue as necessary for metabolic studies of tissue in vitro Other Applications: these blades are also used in the polymer clay industry for thin slicing of clay materials, with no pulling or tearing of material. It also…

96 x 0.2mL wells or 96 x 0.1mL wells Fits a broad range of thermal cyclers Flat Top for ideal sealing with Automated and Manual Seals Slightly Raised Rim around Each Well for improved sealing with strip caps, films, and foils Optically Clear with black printed alphanumerics Cuttable…

CE-Grip Shoe Covers CE-Grip disposable shoe covers provide a foot barrier with excellent waterproofing and antiskid properties. They offer a high level of protection for environments such as pharmaceutical manufacturing, animal labs and industries like rubber, steel or oil. Made with a…

XtraClean pleated bouffant caps are made of a lightweight and soft, virgin polypropylene material. Machine-made, pleated style features double-sewn elastic for added strength and secure fit. Ideal for use in food preparations, pharmaceutical manufacturing and other light industrial…

CE-Force Sticky Floor Mats   Multi-layered clean-film full adhesive layers form mats that effectively capture dirt and dust from foot-traffic and equipment wheels before they enter the controlled environment. Each of the numbered layers of the mat peels off easily to reveal a new clean…

safeForce® fluid resistant isolation gowns are constructed with 35g polyethylene coated polypropylene material. Ultrasonic welded seams provide added protection from liquid splash. Elastic cuffs help ensure a secure fit and extra long ties are sewn at the neckline and waist for…

XtraClean disposable CPE shoe covers are a cost-effective solution that feature a seamless design for general protection against liquids and dirt. CPE (Chlorinated Polyethylene) film has a textured surface and are excellent for short-term use. They fit most shoe sizes. Available in…

The CE-Force Basic disposable shoe covers are made of a polypropylene fabric and are 100% latex and silicone free. They are excellent for transitioning between “clean” and “unclean” areas. These shoe covers are popular in medical and pharmaceutical environments, GMP…

CE-Force HydroGrip disposable shoe covers give you a foot barrier with excellent anti-skid properties. They offer a high level of protection for environments such as pharmaceutical manufacturing, GMP sites and animal labs. They are made with a multilayered fabric coated with BlueMed’s…

The labForce® M1000 Benchtop pH/mV/ISE/Conductivity/DO Meter features automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose. It has three measuring modes for your specific measuring needs:…

XtraClean® Latex free / low lint lab coats are ideal for use in ISO 7 controlled environments and many general application areas. Breathable cloth-like fabric is comfortable and cool. Features include plastic snaps, knit wrists, knit collar, and three pockets. Constructed from…

These XtraClean™ coveralls are made of an anti-static treated, light weight and durable polypropylene fabric, which is cloth-like and has exceptional breathability. Ideal for non-hazardous personal and product protection, while providing cool comfort all day. Basic style XC7030 (white)…

Broad thermal cycler compatibility including Applied Biosystems (ABI) instruments High-contrast, black alphanumeric indexing for easy well identification. Crystal-clear wells to easily verify sample volume. Ultra-thin, uniform wells ensure optimal heat transfer for high reaction…

XtraClean™ cleanroom beard covers are made from hydro-entangled polypropylene fabric and have a latex-free elastic band. Packaged in a sealed polyethylene bags as well as a separate inner-case, poly-bag liner. Size is Universal and the color is white. Sewn with latex-free…

Meets ASTM Type II specifications for distilled water. Suitable for most laboratory applications.

Splash Shield with Glasses Frame Two-Piece Splash Shield is easy to assemble, lightweight and comfortable to wear! This Face Shield is made of .25mm polymer material, consists of a protective cover, eyewear frame and fixing device. Non-sterile, disposable. Application: Physical barrier…

These XtraClean™ disposable (machine-made) shoe covers are made of a polypropylene fabric and are 100% latex and silicone free. Ideal for transitioning between “clean” and “unclean” areas. These shoe covers are popular in medical and pharmaceutical environments, GMP…

For blotting & sequence autoradiography Use with 14 C, 35 S, 32 P, 33 P and 125 I Optimized for chemiluminescence High sensitivity & contrast Compatible with automatic or manual processors Ultra clear, dual emulsion labForce® HyBlot CL Film provides sharp,…

Hot-Start Taq Mastermix™ is the heat activated version of Denville's 2X, ready to go reaction mixture. It is inactive at room temperature and only requires addition of template, primers, and water. A 5 minute pre-heat step at 95°C is required to successfully carry out primer extensions. The Blue…

XC6030 Coveralls are ideal for use in low particulate clean and contolled environments. Constructed from a lightweight blend of polyethylene and polypropylene into a unique breathable membrane. Fabric is suitable for exposure to blood borne pathogens, some hazardous liquids, and any wet general…