Bod Bottles

BOD Bottles for incubating diluted samples of clean water, waste water, effluent water, and polluted water during the 5 day biochemical oxygen demand (BOD) test. Bottles are unnumbered and feature a penny head stopper.

…100 bottles per case and are consecutively numbered. Acrylic stoppers work with all brands of glass and plastic 300mL BOD bottles. Overcaps are made of polyethylene and fit snugly against the rim and shoulder of these disposable BOD bottles. The use of a cap over the mouth of a BOD bottle, to…

…These 300 mL capacity bottles are recommended for the five-day BOD test as referenced in Standard Methods for the Examination of Water and Wastewater, 18th Edition, 5210B, 1992. BOD bottles have a specially designed shoulder radius that sweeps all air from inside the bottle during filling. The…

…These 300 mL capacity bottles are recommended for the five-day BOD test as referenced in Standard Methods for the Examination of Water and Wastewater, 18th Edition, 5210B, 1992. BOD bottles have a specially designed shoulder radius that sweeps all air from inside the bottle during filling. The…

BOD Bottles for incubating diluted samples of clean water, waste water, effluent water, and polluted water during the 5-day biochemical oxygen demand (BOD) test. Bottles are numbered to allow for convenient organization of samples. 300ml bottles also include a bar code. Glass robotic stoppers are…

Large capacity With glass Robotic stopper This 2 liter BOD bottle is recommended for long-term BOD and ultimate BOD analysis. This bottle is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and also ASTM E-438 Type I, Class A requirements and…

BOD Bottle Racks are constructed of coated wire. 1215X63 is holds up to twenty 60 mL BOD Bottles and 1220C96 hold up to twelve 300 mL BOD Bottles. Rubber Leash For BOD Stopper (1234R64) ensures that the stoppers do not become lost when collecting samples in from the field. The 10 mm diameter…

…reagents into a closed, vaportight bottle assembly during mercury analysis Reagents injected by needle penetration of rubber stopper diaphragm; dispersed into sample through fritted bubbler tube Ground glass joint fits into neck on standard 300 mL BOD bottle (see Thomas number 1781N43) …

…cap membrane Removable stirring mechanism Interchangeable design Simplifies measurement operations Use with standard 300 mL BOD bottles; no need for external stirring devices. Improved membrane life assures measurement consistency and speeds maintenance. Probe accuracy is the…

Allows access to entire inside surface of flasks or BOD bottles Black hog bristle brush 4 1/4” long mounted on a flat steel shank attached to pivoting shaft Brush (12 1/8” long) has bristle diameter of 1 1/2”; brush (16” long) has bristle diameter of 1 …

In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

…the leading meters for BOD and dissolved oxygen.  All of the BOD bottles have large, permanently screened-on marking spots. The numbered versions of the 300 mL size bottles are supplied with bar codes for quick and accurate recording of bottle numbers. All of the bottles are manufactured from…

GGA snips were designed to help reduce the incidence of non-conforming GGA test in the wastewater lab. Dilutes to 300 mL in the BOD bottle.

Number of bottles per rack: 12 Bottle capacity: 300mL Corrosion-resistant Rack is manufactured from rugged PVC coated wire Racks interlock for connecting stacked racks (allows safe transport in stacked position)

These racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)

…organic matter by aerobic biochemical action. BOD bottles have a specially designed shoulder radius that sweeps all air from inside the bottle during filling. The interchangeable stoppers have a tapered bottom that also prevents air entrapment. The bottles have a flared mouth, to form a water seal…

Help ensure proper and optimal probe performance with Thermo Scientific™ Orion™ BOD Adapters for Polarographic dissolved oxygen probes. Adapters include stir funnel and electrode adapter sleeve for BOD bottle.

Help ensure proper and optimal probe performance with Thermo Scientific™ Orion™ BOD Adapters for Polarographic dissolved oxygen probes. Adapters include stir funnel and electrode adapter sleeve for BOD bottle.

Usable with all classic grey box and lab meters Measures dissolved oxygen and temperature in B.O.D. bottles Designed to fit into neck of any bottle with a 0.675 inch opening Probe requires manual stirring or use of magnetic stirrer With Membrane and KCl kit. Lead, 1.5 meter (5 ft.).

Self-stirring BOD probe. Simplifies BOD measurements Modular design allows for serviceability Uses convenient screw-on cap membranes Stirrer ensures a representative sample The ProBOD self-stirring BOD probes are designed to fit into standard 300 mL BOD bottles with various…

…warranty; reliable and serviceable, design reduces cost-of-ownership and reduces down-time Probe body tapered to fit into a standard 300 mL BOD bottle and international versions Extremely quiet operation No warm-up time required Self-stirring to provide representative sample and increase…

…down-time Guarded sensor - the sensor guard provides protection of the sensor tip when taking the BOD probe in and out of BOD bottles Probe body tapered to fit into a standard 300 mL BOD bottle and international versions Extremely quiet operation No warm-up time required Self-stirring…

…consisting of a BOD Sensor, a dark glass bottle, an alkali holder and a stirring bar. BOD Sensor Set is designed for use with the VELP MST stirrer. BOD Sensor System 6, a complete package for 6 tests, consisting of a 6-position stirring station with BOD Sensors, dark glass bottles, alkali…

The 200-BOD is a self-stirring BOD probe designed to fit into standard 300 mL BOD bottles and used with the DO200 handheld DO instrument. Uses wall power - power supply included Modular design allows for serviceability Uses convenient screw-on PE cap membranes for the fastest repsonse…

The WTW BOD standard solution is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

…techniques, the BOD EVO Sensor fits directly on the bottle containing the sample. Measurement is available on 4 different scales - 90, 250, 600 and 999 ppm BOD. Higher values can be measured by diluting the sample. BOD EVO Sensor System 6 is a complete package for BOD analysis and is…

The LabChem phosphate buffer blends well with BOD is non-flammable in nature and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only

Compendia References: APHA 5210 B

…of the BOD test tablet, oxygen consumption can be simulated analogously to the respirometric BOD method in distilled water. After placing one tablet to 157 mL of sample, a certain amount of oxygen is chemically bound. This creates a reproducible negative pressure in the BOD sample bottle, which can…

For use with BODTrak II Apparatus. Meets Standard Methods 5210 D requirements. Use one pillow per sample bottle. Hach products are intended for sale/shipment within the US only. International customers should contact their local Hach distributor to place orders for Hach products.