Drying Rack

Compare Tool

Select up to 3 products

Drying Rack
1 - 32 of 139
Sort
View
Show
  • Drying Rack

    labForce® (a Thomas Scientific Brand)

    …36 Small (Black), 36 Large (Red) 2 Drying Baskets Drainage Tubing Mounting Guide & Hardware Replacement Baskets for the labForce Drying Rack Set. 5 Long and 5 short replacement pegs for the labForce Drying Rack Set. Replacement draining set for the labForce Drying Rack Set.

  • Drying Rack

    Dynalon

    …the rack can be tilted up to 20 degrees for added stability and ease of use. Product Dimensions (L x W x H): 18.5 x 7 x 21 in. Drying rack high impact polystyrene. Expandable fasteners to connect additional racks included and interchangeable removable pegs. This 72 place drying rack is molded…

  • Wire Drying Rack

    Heathrow Scientific

    Saves glassware from chips and cracks Drain and dry test tubes, beakers, flasks, and other labware. Place selfstanding rack on a table or near a sink. Or, use hooks to hang rack on the wall. Holds up to 90 pieces of labware on eighteen 127 mm pins and seventy-two 76 mm pins. Constructed of…

  • Epoxy Pegboard Drying Racks

    Inter Dyne Systems

    Drying Rack, Pegboard, Epoxy, Glassware Epoxy pegboards come standard in black, 1" thick material. A stainless steel drip trough (sold seperately) can be easily mounted to the bottom edge to provide excellent draining capacity. Please note: Units do not include a wall attachment and…

  • Acrylic Pegboard Drying Racks

    Inter Dyne Systems

    Drying Rack, Pegboard, Acrylic, Glassware Our acrylic pegboards are made out of 3/4" thick clear acrylic. Pegboards can be supplied with a frosted back to diffuse light, if desired. Pegs are available in white or black and in three different lengths. Bevels can be added at the bottom to pitch…

  • Test Tube Drying Racks

    United Scientific Supplies

    These polyproylene racks can conveniently hold inverted tubes for drying and minimize collection or airborne contaminants. Racks can also be used to hold and dry electrophoresis and chromatography plates. Autoclavable. The 96 place rack features an 8 x 12 array of pegs that hold test tubes up to…

  • Drying and Draining Rack

    Globe Scientific

    …for hanging Hooks for joining together additional racks Rack dimensions: 17.7"(W) x 24.8"(H) x 4.3"(D) (450mm x 630mm x 110mm) Peg Dimensions: 3.7" long x 0.6" diameter (95mm x 15mm) This durable drying system is made from high-impact polystyrene (HIPS) to…

  • Eliminates spills Easy to clean Unit is dishwasher safe Plastic grid cushions and protects against breakage and scratches. Grid cuts drying time in half by promoting air circulation. Rack measures 16 1/2” x 13” x 5/8” and weighs 1 lb.

  • … Space in laboratories is always in high demand making the small footprint of the Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing labware. All models come with three size and length rugged V-channel pegs that can be moved and repositioned to…

  • …customized workstation. DS-12 Drain Shelf 12" shelf for drying small tools, cylinders and equipment. Shipped with required support pegs for installation. DB-12 Drain Basket 12" basket for drying smaller tools, cylinders and equipment. Shipped with required support pegs…

  • Sturdy steel, A-shaped rack Plates rest on rubber supports Rubber pads prevent sliding Three of the rack’s ten slots are wide enough to hold double plates. Constructed of steel with a baked-on epoxy coating. Minimum width of the plate supported is 6 1/2” (16.5 cm).…

  • Acrylic slide rack, inclined, used for draining/drying slides. 10 slots accommodate 50 slides. 8.2W x 8.5D x 2.0H (front) x 4.45H (rear).

  • Drying Rack, Stainless Steel, Glassware Mod-Rack pegboards serve a dual purpose in a modern laboratory. First, they allow you to quickly dry important, and often fragile, equipment in a sanitary manner. Second, our well-crafted pegboards are a safe place to store often used materials so they…

  • Drying Rack, Stainless Steel, Glassware Mod-Rack pegboards serve a dual purpose in a modern laboratory. First, they allow you to quickly dry important, and often fragile, equipment in a sanitary manner. Second, our well-crafted pegboards are a safe place to store often used materials so they…

  • Dry It - No Matter How Much Space You Have Small, compact footprint enables placement where it is needed most Dries labware quickly by providing continous warm air circulation High storage capacity to accommodate up to 76 peg positions for all types of labware Selector knob allows…

  • …base for safety Ten slots for placement Perfect for storing clean, used, treated or untreated plates. Wide handles provide a secure grip during transportation. Polypropylene material reduces chipping and cracking. Flat area provided on rack for labeling. Dimensions: 8 x 15 x 9 inches.

  • T/T RACK,WET/DRY,90 PLACES

    United Scientific Supplies

    Economical yet very durable racks that are submersible, autoclavable, and easily stack when empty.  Made from a special blend of polypropylene (PP) that makes them sink in a water bath and maintain their stability, even in agitated water.  The top tier features an alphanumeric grid reference. …

  • Plastic Drying/Draining Rack

    United Scientific Supplies

    Plastic draining rack excellent for drying tubes and bottles. The back plate has 20 holes into which pegs are tightened. Bottom features a wastewater tray and drain

  • Test Tube Peg Racks

    Globe Scientific

    Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…

  • …degrading sample quality Safer – Keeps sample frozen to ensure integrity and ensures freezers stay ice-free Faster – the de-icing process takes 10-15 seconds Flexible – handles any SBS format rack Reliable – de-ices sample consistently across an entire sample rack

  • …solvent stream is cut off and an air jet is directed into the tubes for drying. Cleaning is equipped with pressure regulator with external adjustment and air pressure gauge for regulation of airflow. Six movable draining racks provide draining excess oil from tubes before use of solvent (air line is…

  • A BINDER vacuum drying oven VD series gently dries materials with homogeneous temperature distribution. The patented expansion shelf technology from BINDER ensures optimal heat transfer. The shelves are easy to position where required and the inner chamber of the vacuum drying oven is easy to clean.…

  • Benefits ·         Fast, gentle drying ·         Optimum heat transfer through large thermal conducting plates ·         Safe working thanks to…

  • …vacuum drying ovens. Vacuum Valve Turn Knob Vacuum valve turn knob with steel shaft, fits our AccuTemp series vacuum degassing drying ovens. Length: 4 inches, diameter: 2.5 inches. Wire Shelves Stainless steel oven racks for our FO and VO series digital drying ovens. Each rack

  • The BINDER FDL 115 with silicone and dust-free inner chamber, as well as symmetric airflow dries specimens containing solvents and thus this safety drying oven meets all EN 1539 requirements. Important characteristics Temperature range: room temperature plus 10°C to 300°C …

  • …range: room temperature plus 5°C to 300°C APT.line™ preheating chamber technology Forced convection Adjustable exhaust air flap Controller with timer functions 2 chrome-plated racks Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm

  • …room temperature plus 5°C to 300°C APT.line™ preheating chamber technology Gravity convection Adjustable exhaust air flap Controller with timer functions 2 chrome-plated racks Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm

  • Dimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples…

  • …and powerful unit in a solid configuration at a very attractive price. Temperature range: 60°C to 230°C Adjustable exhaust air flap Hydro-mechanical thermostat Class 1 temperature limitation device (Model E028-230V-T) Timer 0 – 120 min 2 chrome-plated racks

  • …Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.