Resists most aqueous solutions, acids and bases Steam sterilizable Can be used from -45° C to 110° C Centering ring holds bottle from wall Large carrier accommodates 2.5 L and 4 L bottles. Small carrier accommodates 500 mL and 1,000 mL bottles. Made from a unique, high performance,…

Saves glassware from chips and cracks Drain and dry test tubes, beakers, flasks, and other labware. Place selfstanding rack on a table or near a sink. Or, use hooks to hang rack on the wall. Holds up to 90 pieces of labware on eighteen 127 mm pins and seventy-two 76 mm pins. Constructed of…

BioCision® thermoconductive modules provide reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they…

Designed specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm. Made of durable and corrosion resistant white polypropylene plastic End plates have handles for easy transport and stacking Top shelf…

For ultra-low temperature storage of 1.2 and 2.0 mL cryogenic vials Usable in a wide range of environments and temperatures (-196 to +121°C) Numerical grid system, which is molded into box with corresponding numbers printed on lid 25-place boxes are arranged in a 5 x 5 array and measure…

Keep single tubes upright in confined spaces Select among our three one-well racks--epoxy-coated steel wire racks, friction-fit polystyrene racks, or interlocking polypropylene racks. The autoclavable, epoxy-coated steel wire rack provides more friction with the benchtop for more secure…

The 96 Well "Reversible" Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. …

Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…

This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…

Designed for transportation of potentially hazardous materials in racks Constructed of clear polycarbonate with a silicone gasket Autoclavable Four polysulfone clamps securely lock the top and bottom together. Dimensions: 19” x 6” x 6” (495 x 165 x 170 mm). …

ABS CryoMax System Vial Capacity: 750 (2ml) Total Box Capacity: 30 Rack Capacity: 6 Boxes per rack: 5 Vials per box: 25 Liquid Nitrogen Capacity: 47.4 liters Static Evaporation Rate: .39 liters/day Static Holding Time: 76 days Neck Diameter (mm): 127 Exterior Height…

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…

Great alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…

These polyproylene racks can conveniently hold inverted tubes for drying and minimize collection or airborne contaminants. Racks can also be used to hold and dry electrophoresis and chromatography plates. Autoclavable. The 96 place rack features an 8 x 12 array of pegs that hold test tubes up to…

Ready-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.

Drying Rack, Stainless Steel, Glassware Mod-Rack pegboards serve a dual purpose in a modern laboratory. First, they allow you to quickly dry important, and often fragile, equipment in a sanitary manner. Second, our well-crafted pegboards are a safe place to store often used materials so they…

Chemical and corrosion-resistant steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F);…

Labcon 16 or 36 Place Freezer Storage Boxes for 50mL and 15mL Centrifuge Tubes. These boxes are designed to hold 50mL or 15mL tubes and are perfect for long term storage of frozen samples. They include a white upper body that can be easily labeled with a lab marker, a numerical reference grid, and…

Create your own two-combination appliance with SUMMIT's convenient Stacking Rack, an easy-to-install piece that allows many of our refrigerators and freezers to house a second model on top. Many facilities limited on floor space require separate units for cold storage, with more unique needs…

Easy tube content ID Autoclavable Angling 50 mL tubes allows easier identification of contents marked on cap. The rack, whether used on a benchtop or in a refrigerator, holds frequently used reagents nearby and on an angle facing the user. Angled rack is also useful for draining excess…

The 64 Well “Reversible” Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. …

The chemical-resistant, HDPE-coated wire racks feature a slotted bottom and reinforced edges. These racks hold all brands and types of tubes, conical, round, flat bottom, plastic or glass. The square wells have three tiers so the tubes can fit securely in the racks. It is also Autoclavable and can…

Achieves accurate pipetting by allowing the flexibility to adjust the angle of the microplate (45° max. tilt).  The stand takes up little benchtop space measuring only 6"L x 4.50"W x 2.50"H. Well Orienters are sold separately.

Rotating Wash Bottle Holder (H0382): Stay mobile with the Rotating Wash Bottle Holder; The sturdy handle provides comfort and control; Holds bottles up to 3” in diameter; Polycarbonate construction Rotating Two-Tier Lab Depot (H0381): Holds up to four wash bottles; Rotates 360° degrees;…

Unique  tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve…

Small enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable

Rotating Wash Bottle Holder (H0382): Stay mobile with the Rotating Wash Bottle Holder; The sturdy handle provides comfort and control; Holds bottles up to 3” in diameter; Polycarbonate construction Rotating Two-Tier Lab Depot (H0381): Holds up to four wash bottles; Rotates 360° degrees;…

In addition to cryogenic freezer equipment, we supply upright freezer racks, chest freezer racks, liquid nitrogen freezer racks, canisters / cassettes and frames as well as laboratory boxes and dividers. By understanding the needs of the biotechnology industry, Custom Biogenic Systems provides…

Polycarbonate rack for use with DigiTUBEs to insert 24 samples on block at one time. For use with 50 ml DigiPREP MS and LS blocks only.

Five-position pipettor rack with magnets on the back for attaching it to the inside of a hood or other metal surface. White acrylic rack has neodymium magnets with a total pulling force of 41.1 lbs. For secure attachment. The rack holds pipettors of every shape and size. Made in USA.

Adjustable shelf will accommodate a variety of funnel lengths and flask or beaker sizes. Rack is constructed of vinyl-coated heavy gauge wire. The rack holds twelve 2" to 4" diameter funnels. Dimensions: 16.25" H, 25.375" W, 10.75" D

Dry It - No Matter How Much Space You Have Small, compact footprint enables placement where it is needed most Dries labware quickly by providing continous warm air circulation High storage capacity to accommodate up to 76 peg positions for all types of labware Selector knob allows…