Racks

Compare Tool

Select up to 3 products

Sort
View
Show
  • Horizontal Pipette Stand

    United Scientific Supplies

    This detachable stand can hold 12 pipettes, 6 on each side, in a horizontal position. Molded in polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with polypropylene. This stand can be easily disassembled for space saving storage.

  • Epoxy-Coated Wire Test Tube Rack

    United Scientific Supplies

    Heavy wire test tube rack includes a durable epoxy coating. Holds up to 36 tubes.

  • Plastic Drying/Draining Rack

    United Scientific Supplies

    Plastic draining rack excellent for drying tubes and bottles. The back plate has 20 holes into which pegs are tightened. Bottom features a wastewater tray and drain

  • Test Tube Rack Set

    United Scientific Supplies

    This set contains twleve 24 mL glass test tubes with rubber stoppers, and a brightly colored two tiered test tube stand.

  • Test Tube Basket

    United Scientific Supplies

    These test tube baskedts are made of polypropylene. These autoclavable, unbreakable, and non-corrosive baskets are ideal for rinsing and draining glassware. They are also useful for storage of test tubes or culture tubes during sterilization or incubation.

  • Nessler Cylinder Racks

    United Scientific Supplies

    Polypropylene rack is designed to hold six Nessler cylinders. Flat lower deck is white to provide a reflective surface. Chemical and corrosion resistant rack can be autoclaved at 121°C (250°F).

  • Plastic Slide Storage Rack with Clear Lid

    United Scientific Supplies

    Plastic (ABS) slide storage box features a removable slide tray with 100 numbered slots that hold one or two slides each. Clear hinged lid allows easy view of labels. Slides can be stored vertically with the label up for easy identification or bar code reading. Measures 3" W x 9" D x 3-1/2" H. Non-Autoclavable.

  • Vial Racks, PP

    United Scientific Supplies

    Sturdy, economical, and convenient racks for samples stored in vials. Autoclavabale at 120°C for 20 minutes. Can be stacked when not filled, for easy storage. Each well features a drainage hole at the bottom.

  • Wooden Test Tube Rack, 13-Tube

    United Scientific Supplies

    Two-tier rack with thirteen 25mm holes, and six drying pins Solid hardwood construction Polished to minimize damage from spills

  • Stainless Steel Test Tube Rack

    United Scientific Supplies

    Sturdy Z-shaped rack made from a single sheet of heavy gauge Stainless 304. Rack features 25 wells in 5 rows, for tubes up to 16mm in diameter. Polished, smooth surface facilitates easy cleaning and labeling.

  • PLASTIC TEST TUBE RACK

    United Scientific Supplies

    This polyethylene rack will hold six test tubes, and has six drying pins. Sides are fully open for clear viewing. Rack has two 30mm and four 20mm holes, and is pre-assembled.

  • Multi Combination Racks

    United Scientific Supplies

    Organize various sized tubes and vials. Racks can withstand temperatures of -80°C to +121°C and are autoclavable. Pack includes 1 each of blue, green, yellow, and red racks.

  • TEST TUBE RACK, 1-PC

    United Scientific Supplies

    One-piece molded racks have a three-tier grid design. Polypropylene construction provides good chemical and thermal resistance. Autoclavable. Racks feature a 3/4" x 2-3/4" labeling area on two sides. Open design allows easy viewing of contents from all sides.Available in sizes that hold 13mm or…

  • Polycarbonate Test Tube Racks

    United Scientific Supplies

    Polycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.

  • TEST TUBE RACK SET, PLASTIC TUBES

    United Scientific Supplies

    This set contains twelve 15ml screw top graduated plastic tubes and a brightly colored two tiered test tube stand.

  • Microcentrifuge Tube Reversible Racks

    United Scientific Supplies

    Polypropylene racks contain grids on both sides. One side holds 1.5/2.0ml microcentrifuge tubes with extra smaller positions for 0.5ml tubes, and the other side holds 0.5ml microcentrifuge tubes with extra positions for 1.5/2.0ml microcentrifuge tubes. The 96 place rack contains 12 x 8 arrays. The…

  • Microcentrifuge Tube Racks

    United Scientific Supplies

    Sturdy autoclavable racks are compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Racks lock together on each side so that several can be attached for larger experiments. Each hole has molded in numbers for sample indentification. Ergonomic design provides easy insertion and removal and of…

  • Test Tube Drying Racks

    United Scientific Supplies

    These polyproylene racks can conveniently hold inverted tubes for drying and minimize collection or airborne contaminants. Racks can also be used to hold and dry electrophoresis and chromatography plates. Autoclavable. The 96 place rack features an 8 x 12 array of pegs that hold test tubes up to…

  • T/T RACK,WET/DRY,90 PLACES

    United Scientific Supplies

    Economical yet very durable racks that are submersible, autoclavable, and easily stack when empty.  Made from a special blend of polypropylene (PP) that makes them sink in a water bath and maintain their stability, even in agitated water.  The top tier features an alphanumeric grid reference. …

  • WOODEN TEST TUBE RACK, 12-TUBE

    United Scientific Supplies

    Six 25mm holes, six drying pins, with a 1/2" thick base. Solid hardwood construction. Polished to minimize damage from spills.

  • Centrifuge Tube Boxes

    United Scientific Supplies

    These PP boxes are a more durable alternative to foam racks. Boxes are autoclavable.

  • Vertical Pipette Stand

    United Scientific Supplies

    This is a polypropylene, stable, non-corrosive, detachable stand, which can hold 28 pipettes with a maximum diameter of 9/16". The heavy base measures 9" in diameter and a polypropylene coated square rod measuring 15" in length is screwed into the base. The top disc has holes for holding the…

  • Microcentrifuge Tube Storage Boxes

    United Scientific Supplies

    These rugged autoclavable storage boxes are molded in polycarbonate, and can be used at temperatures of -150°C to 121°C. Designed to hold 100 each 0.5ml microcentrifuge tubes, or 64 each 1.5ml tubes. The numbered grid on transparent lid is keyed in one position to prevent misalignment. Lid…

  • T/T RACK,3-TIER

    United Scientific Supplies

    Polypropylene racks with a 3-tier design provide a clear view of the tube contents and convenient insertion and removal of tubes.

  • PLASTIC TEST TUBE RACK, ROUND, 24-TUBE

    United Scientific Supplies

    Good quality round test tube rack will hold 24 tubes up to 20mm in diameter. Solid high-impact plastic construction. Rack is 145mm in diameter and 70mm high, and features a perforated bottom. Shipped preassembled.

  • PLASTIC TEST TUBE RACK, ROUND, 12-TUBE

    United Scientific Supplies

    This circular 12 place Polypropylene test tube stand has four 25mm diameter holes and eight 19mm diameter holes. The base has matching wells and 16 drying pins surrounded by a trough to catch drippings. Pre-assembled.

  • Test Tube Rack, Epoxy

    United Scientific Supplies

    Heavy wire test tube racks includes a durable epoxy coating. Autoclavable.

  • Rotator Workstation

    United Scientific Supplies

    Organize various sized tubes using the Rotator Workstation. Racks can be joined together using the unique rotate and lock design. Add as many racks as you need. Racks can withstand temperatures of -80°C to +121°C and are autoclavable. Built-in ridges enable easy drainage of liquids. Pack…

  • Heavy Duty Cube Test Tube Rack

    United Scientific Supplies

    A very sturdy one piece molded polypropylene rack. All four sides can be used interchangeably for 12mm through 25mm diameter tubes. 88 spaces on its four sides

  • Microcentrifuge Tube Racks

    United Scientific Supplies

    Stackable polycarbonate racks are compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide temperature range (-135 °C to 135 °C). Autoclavable.

  • Two-Tier Microcentrifuge Tube Racks

    United Scientific Supplies

    Two-tier polypropylene racks hold up to 100 of 1.5ml microcentrifuge tubes. Racks are autoclavable and can be used in water baths or freezers. A molded-in alphanumeric index makes sample identification easy. Racks are stackable and have a 2-3/4" labeling are on two sides.

  • Polycarbonate Cryo Rack

    United Scientific Supplies

    This durable and autoclavable Cryo rack can hold 50 vials. Unique design at the bottom of each well lets vials be unscrewed without removing them from the rack. The rack features an alpha numeric index, and anti-skid rubber feet.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.