Petri Dish Rack

Compare Tool

Select up to 3 products

Petri Dish Rack
1 - 31 of 31
  • Acrylic Plastic Petri Dish Racks

    Thermo Scientific Nalgene

    Provide full side visibility for checking culture during incubation Lightweight and easy to load; provide safe transport Break-resistant PC posts screw in easily 3497A30 and A32 Racks are closed top, permitting inversion when loaded

  • Stainless Steel Petri Dish Can


    Used for sterilization and storage Holds 18 dishes 100 mm x 10 mm or 10 dishes 100 mm x 15 mm Supplied with removable rack and stainless steel lid Dimensions: 11.4 cm (4-1/2") diameter by 26.7 cm (10-1/2") high

  • Scienceware® Poxygrid® Petri Dish Carrying Rack

    Bel-Art Products

    dishes Epoxy-coated steel wire rack has a wide front opening that permits easy access but prevents dishes from sliding out. Not suitable for glass petri dishes. Dimensions for single stack rack (L x W x H): 108 x 108 x 356 mm; holds 20 each 100 x 20 mm dishes. Dimensions for three stack rack (L x…

  • Easyplate™ 100mm Petri Dish Racks

    Bel-Art Products

    …of Petri dishes. Available in 4 colors and two sizes; the 24.1cm (9-1/2") high size holds forty-eight 100mm Petri dishes, and the 36.8cm (14-1/2") high size holds eighty-four 100mm Petri dishes. Silicone holding strips grip each Petri dish; easily insert and remove groups of dishes

  • Contact Plate / Petri Dish Rack - White Polypropylene

    Bel-Art Products

    …incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with built-in handle has ample space for labeling Up to four racks can be stacked together…

  • Scienceware® Poxygrid® Petri Dish Dispensing Rack

    Bel-Art Products

    …100-mm diameter dishes Epoxy-coated steel wire rack has a wide front opening for easy loading while allowing a single dish to be dispensed from the bottom. The rack tilts toward the rear for convenient presentation of the dishes. Not suitable for glass petri dishes. Dimensions for single rack

  • 100mm Petri Dish Rack - Clear TPX Body

    Bel-Art Products

    Clear, TPX® rack with polypropylene posts securely holds up to fifty-four 100mm Petri dishes. Shipped flat, they can be assembled in minutes. Easily viewed through the clear base and divider Dishes can be removed with one hand Built-in handle provides easy transport Rubber feet…

  • Sample Racks for Precision™ Water Baths

    Thermo Scientific Precision

    …to 25mm from 97 to 150mm high Stainless-Steel Petri Dish Rack Measures 9.75 x 8.75 x 6.25 in. (24.8 x 22.2 x 15.9cm) Holds 80 x 50mm or 30 x 90mm Petri dishes Microcentrifuge Test Tube Racks Requires Clip Fastener Measures 127 x 101…

  • Adjustable Width Petri Dish Dispenser Rack

    Bel-Art Products

    This adjustable dispenser neatly and safely holds 15 Petri dishes up to 10.2cm (4") diameter. Slides open at the base for easy refilling Rugged ABS plastic 8.9cm (3-1/2") wide; extends from 12.7cm (5") to 21cm (8-1/4") long; 21cm (8-1/4") high

  • Poxygrid® 100mm Petri Dish Mini Rack

    Bel-Art Products

    Organize and Safely Hold Six, 100mm Dishes The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized. Holds six 100mm Petri dishes with lids Ideal for lab transport and incubation of dishes Epoxy coated steel wire is chemical and corrosion resistant…

  • 60mm Petri Dish Racks

    Bel-Art Products

    …incubation of 60mm Petri dishes and helps to streamline benchtop sample processing. Rack base is epoxy coated steel, and all other parts are made of white polypropylene. Racks are shipped flat and easily assemble in minutes. Six columns hold up to fifty-four Petri dishes with lids 10-1/2…

  • Almoore Enterprises Anaerobe Jar

    …It also doubles as a handy carrying handle. The 3/8” thick anodized aluminum lid won’t warp, and it’s guaranteed to resist cracking or breaking for ten years. Shipped complete with a stainless steel rack to accommodate 100mm petri dishes and a stainless steel catalyst basket.

  • GasPak™ EZ Gas Generating Systems


    …containers have a durable, airtight seal and handles for portability. Two sizes: Standard (holds 15-18 Petri dishes) and Large (holds 30-33 Petri dishes). Polyurethane racks for holding Petri dishes are available for both sizes. BD GasPak EZ Container Systems (1094M16, M19, M22) Rapidly…

  • Scienceware® Stak-A-Tray™ Rack

    Bel-Art Products

    …stainless steel construction permits easy movement of dishes or parts without snagging or tipping over Perforations in trays allow flow of gas, air and water vapor Up to five racks interlock to form a rigid column of up to 20 levels Rack 3496V28 has center support on bottom and third…

  • GasPak™ 150 Large Anaerobic Systems


    Petri dishes. Complete system similar to GasPak 100 system with the following components: GasPak 150 polycarbonate jar (non-vented) GasPak 150 lid assembly with O-ring gasket and catalyst reaction chambers (3 ea.) Ten catalyst charges GasPak 150 rack for 36 x 100 mm culture dish

  • Scienceware® Petri Dish Incubation Trays

    Bel-Art Products

    The Petri Dish Incubation Tray holds 100mm (4") Petri dishes securely on an incubator rack. Excellent aid for keeping cell cultures organized 28 holes in bottom allow air passage; 19mm (3/4") in diameter 1.6mm (1/16") thick, white epoxy-coated steel Steam autoclavable…

  • Petri Dish Rack Posts

    Thermo Scientific Nalgene

    Polycarbonate frame, white polycarbonate posts Petri dish rack can be decontaminated by heat sterilization Smooth, rounded corners, finger-grip handle and rubber feet make carrying up to 54 plastic-round dishes (100 x 15mm) or 42 glass-round dishes (100 x 15mm) safe and secure Simple…

  • Scienceware® Petri Dish Incubation Tray

    Bel-Art Products

    Transport and store petri dishes with ease Easy sample grouping and identification Autoclavable polypropylene trays Provides easy access to petri dishes. These stackable polypropylene trays can be autoclaved to assure contamination-free contact surfaces. Designed to hold five 10…

  • Lab Armor Beads™

    Lab Armor

    …accessories. So no more accidents from float-away vessels. In fact, Beads aren’t limited to capped, watertight vessels. Imagine using petri dishes and 96-well plates right in a Bead Bath. No water. No problem. Eco-friendly Beads can transform a water bath into a greener instrument.…

  • FlaskScrubber Glassware Washers


    …the spindles into the interior of the glassware. No separate dryer or drying oven is needed. Specialized inserts for pipets, BOD bottles, petri dishes, culture tubes and small utensils enhance its versatility. FlaskScrubber Vantage™ Series Glassware Washers are freestanding washers…

  • Scan® 100 Manual Colony Counters


    …USB port allows export of the results to the software of your choice (PC/Mac) to guarantee traceability. Reads 55, 65, 90, 150 mm Petri dishes PetriFilm™, Sanita-kun™, Compact Dry™ Hardware Counting: 0-1999 CFU Multifunction digital screen …

  • SteamScrubber Glassware Washers


    …Glassware Washers have stainless steel top and bottom racks that accommodate basket inserts for a wide variety of glassware shapes and sizes, primarily beakers and other wide-mouth glassware. Specialized inserts for BOD bottles, petri dishes, culture tubes and small utensils enhance its versatility.…

  • Scienceware® Rack Slanter

    Bel-Art Products

    Tilt your test tube rack to 25°, 35° or 45° to reduce hand strain when working with pipettors. Also ideal for creating agar slant tubes or use with the Mini-Magnifier to aid in the viewing of Petri dishes. Base legs have predetermined slots that stand slides in and out of to…

  • Incu-Shaker™ 10L with Magic Clamp


    …models, the 10L is built to last. Large 18 x 18", up to 5 x 2L Exceptional temperature uniformity Horizontally circular 19mm orbit for aeration & mixing Instantly change flask clamps with MAGic Clamp™ accessories Optional shelf for Petri dishes, microplates, etc.

  • Incu-Shaker™ Mini Shaking Incubators


    …features a non-slip rubber coated surface, ideal for tissue culture flasks, petri dishes and staining trays. The convenient MAGic Clamp™ platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly…

  • Orbi-Shaker™ Jr. Compact Oribital Shakers


    …ideal for tissue culture flasks, Petri dishes and staining trays. Additional platforms are also available for the Orbi-Shaker JR, including the convenient MAGic Clamp™ platform (PATENT PENDING) for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method…

  • FlaskScrubber Vantage Series Glassware Washer


    …BOD bottles, petri dishes, culture tubes and small utensils enhance the washer's versatility. The washer may be outfitted with an Upper Standard or Spindle Rack to increase capacity. In addition, a Lower Standard Rack may be used instead of the Lower Spindle Rack. (Additional racks and baskets…

  • LSE™ 49L Shaking Incubators


    …maximize space efficiency. The built in orbital shaker accepts a large assortment of platforms and clamps that can accommodate flasks, Petri dishes, and test tube racks. The maximum capacity is 4 x 1L flasks. Outstanding temperature uniformity Large viewing area for undisturbed monitoring…

  • Maxi Mix III Rotary Shakers

    Thermo Scientific

    …(41 x 20 cm) non-skid surface for Petri dishes or other vessels that do not require clamping. The Flask Holder (8289M90) can accommodate up to four 250 mL flasks at one time. The Universal Holder (8289M95) accepts flasks, beakers, bottles and test tube racks between the two adjustable rubber…

  • Orbi-Shaker™ Orbital Shakers


    …a non-slip, rubber coated surface, ideal for tissue culture flasks, Petri dishes and staining trays. The convenient MAGic Clamp platform (patent pending) is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly…

  • Helix 250 Orbital Shakers


    …the Helix 250 Orbital Shaker. The Helix 250 Tray and Mat Assembly is designed for shaking vessels that do not require traditional clamps. Petri dishes, microplates, beakers, titer plates, slides and culture flasks can all be used when the assembly is attached to the Helix 250. The assembly is…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.