Centrifuge Tube Racks

Compare Tool

Select up to 3 products

Centrifuge Tube Racks
1 - 32 of 178
Sort
View
Show
  • Centrifuge Tube Racks

    NEST Scientific USA

    Polypropolyne material Individually wrapped Can be assemble or disassembled

  • …brands of centrifuge tubes. These tubes are made from a unique medical grade resin that is far more durable than commodity grade resins used in most other brands of tubes. This high quality resin makes it possible for you to spin these tubes at g-forces up to 233% greater than other tubes. So you…

  • …to four wash bottles; Made of ABS for easy disinfecting with bleach solution; Can be wall mounted Centrifuge Balance Tube Caddy (C0021): 17mm hole diameter; Saves bench space and keeps tubes within reach; Special adhesive-mount tape comes pre-attached to caddy and withstands centrifuge vibration

  • …the side of the tube). The 1.7ml and 0.5ml sizes do not have injection nubs at the bottom and, therefore, have extremely smooth round bottoms for improved visibility and pellet formation. Tube rims and caps are small enough to fit side by side, in almost any rack. Caps make a "clicking"…

  • …the side of the tube). The 1.7ml and 0.5ml sizes do not have injection nubs at the bottom and, therefore, have extremely smooth round bottoms for improved visibility and pellet formation. Tube rims and caps are small enough to fit side by side, in almost any rack. Caps make a "clicking"…

  • rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Work on the benchtop, float in the water bath Tubes are held tightly in rack to assure no “pop-up” tubes or…

  • Labcon 96-Place Racks and Storage Boxes. These are for use with 0.5mL, 1.7mL and 2.0mL micro centrifuge tubes and 2.0mL cryo- vials. These double-sided racks hold 1.7mL and 2.0mL tubes on one side and 0.5mL on the reverse side. Rack and clear lid are fully autoclavable (122°C) and…

  • …resin. PerformR® tubes can be used in everyday lab work and give you more value than lesser quality tubes. High Performance Centrifugation PerformR® Centrifuge tubes are designed for your everyday centrifugation and storage needs. These tubes include large white solvent…

  • Test Tube Rack Unwire™ Wht 13 mm

    Thermo Scientific Nalgene

    Full-size Unwire test tube racks securely hold a full load of test tubes or centrifuge. Up to 72 of the smaller diameter tubes can be held at once. Molded in six bright, permanent colors Resmer™ manufacturing technology makes these racks keep their bright colors longer. Useful in a wide…

  • Microcentrifuge Tube Storage Boxes

    United Scientific Supplies

    …in polycarbonate, and can be used at temperatures of -150°C to 121°C. Designed to hold 100 each 0.5ml microcentrifuge tubes, or 64 each 1.5ml tubes. The numbered grid on transparent lid is keyed in one position to prevent misalignment. Lid accepts writing with a marker. Not recommended…

  • labForce Ultra-High-Speed 15mL & 50mL Centrifuge Tubes have been designed for high speed centrifugation and meet the demands of the most crucial scientific work. Produced using premium grade USP Class VI resins in an automated, touch free manufacturing process that provides both ultimate…

  • …either 1.5 to 2ml micro tubes / cryo vials (81-place box) or 5ml conical centrifuge tubes, including Eppendorf* brand (25-place box). 81-place micro tube / cryo vial box fits standard 2” ultra-low temperature (ULT) freezer racks 25-place 5ml conical centrifuge tube box fits standard…

  • …conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required; rack is ready to use. Securely hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm diameter sizes with Thermo Scientific™ Nalgene™ Unwire™ Test Tube Racks.

  • …microcentrifuge tubes are made from a crystal clear resin that allows users to easily view samples. Polypropylene tubes are suitable for vapor phase liquid nitrogen storage, boiling and autoclaving. External ribs on the free standing tubes position and lock the tubes into place in racks with…

  • Cylindrical wells for tubes, vials, bottles, centrifuge shields, etc. Stable, one-piece construction Versatile racks offer wells and drying pins

  • Perfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …

  • Microcentrifuge Tubes and Racks

    United Scientific Supplies

    Clear plastic micro centrifuge tubes with attached thumb caps. Tubes are graduated and autoclavable. Racks are made of polypropylene and feature removable lids.

  • Poxygrid® 50mL Centrifuge Tube Racks

    Bel-Art - SP Scienceware

    This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and…

  • Polyfoam racks for PCR, microtubes and centrifuge tubes Eliminate expensive plastic floating racks with economical polyfoam floating racks. Easy to use in waterbaths or beakers. Inscriptions with  Identi-Marker  pens may be made for quick identification. Unique Features …

  • Posi-Click™ 2.0 mL Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes

  • Posi-Click™ Small Cap Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits standard centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume identification Small cap allows tubes to be…

  • Poxygrid® 50mL Centrifuge Tube Racks

    Bel-Art - SP Scienceware

    50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…

  • Posi-Click™ 1.7 mL Large Cap Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    tubes feature a large easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Frosted Large Cap and writing panel allows for an extra writing room and is resistant to smearing. Boilproof available Fits all standard 1.5mL centrifuge

  • 15 & 50mL Centrifuge Tubes

    Celltreat Scientific

    tubes, 16,000g for 50mL conical bottom tubes, and 6,000g for self-standing tubes Polystyrene tubes Max Force (RCF) is 3,000g Temperature range of -80°C to 120°C 15 and 50mL clear tubes are available in recyclable racks or bulk packaged in zip-closure bags Clear centrifuge tubes

  • Scienceware® 50mL Tube Holders

    Bel-Art - SP Scienceware

    Polystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top

  • Poxygrid® 500mL Centrifuge Tube Racks

    Bel-Art - SP Scienceware

    Keeps 500mL Centrifuge Tubes Upright and Secure This unique steel wire rack allows storage and transport of up to four (4) 500mL conical bottom centrifuge tubes. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature…

  • Holds two sizes of conical bottom tubes Polystyrene foam racks are designed to hold Corning 15 and 50 mL conical bottom plastic centrifuge tubes in the same rack.

  • Thomas No. 1200C44, 1200C45, 1200V46, 1200C47, 1200C48, 1200C49 Rack with Drawer for 15ml Centrifuge Tubes Thomas No. 1200C50, 1200C51, 1200V52, 1200C53, 1200C54, 1200C55 Rack with Drawer for 50ml Centrifuge Tubes

  • This expandable 4-part rack system holds 50mL and 15mL centrifuge tubes, micro centrifuge tubes, culture tubes, PCR tubes, and plates, and culture tubes. You can assemble it into the configuration that works for your lab. Additional racks can be linked together to form workstations. Autoclavable…

  • Rack for 15mL & 50mL centrifuge tubes, orange, ships flat & is simple to assemble. Holds twenty 50mL and thirty 15mL centrifuge tubes.

  • …and 50mL centrifuge tubes are made of premium polypropylene, with exceptionally uniform wall thickness for clarity and centrifugal strength. Tubes and caps may be used for sample storage at temperatures as low as -45°C. The maximum centrifugal forces are 12,000xg for the 15mL tubes and 15,000xg…

  • One or two drawers (over/under) For upright freezers Tube racks are built-in

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.