Quality gas burner for lab. use, aluminum burner mixing tube comes complete with a brass flame stabilizer. Mounted on a die casted zinc alloy base. Quality gas burner for lab. use, aluminum burner mixing tube comes complete with a brass flame stabilizer and is threaded into a die casted zinc alloy…

The Bunsen Burner can be used with natural gas or cylinder propane gas. The burner has a knob that allows you to adjust the height of the flame and a sturdy cast iron base that provides stability.

The safe alternative for traditional Bunsen burner or alcohol! Flame without a match Innovative Security Technology Easy-to-use Low cost and environmentally friendly Minimum space requirement Multi-Talented The Flame 100 is ideally suited for all flame…

Designed to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other similar applications. Made of brass.

This all metal, permanent wick alcohol burner has a tank capacity of 100ml. The 'wick' portion is a ceramic fiber inserted into a thin copper tube. This construction allows for a constant flame. The burner is fueled by high-quality alcohol which can be found in most local hardware stores (not drug…

Premium Tirrill Bunsen Burner, LPG - StabiliBase Anti-Tip Design PREMIUM DESIGN The Tirrill Bunsen burner is designed for finely controlled air and gas mixture. Provides a safe, continuous stream of flammable gas used for heating, sterilization and combustion FOR LPG Suitable for use…

The Humboldt Ring Burner features an improved design that puts the guide pins on the inside circumference so that the burner remains equidistantly around the still. A Fletcher attachment regulates the gas and air. The overall shank length is 11" (279mm), ID is 4-3/4".

The Tirril Burner with Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Provides separate control of both…

Ground glass cap Wheaton 400 borosilicate glass Supplied with glass stopper This burner, manufactured from soda-lime glass, is designed for use with isopropyl or denatured ethyl alcohol. Its low-heat flame is well suited for microscopy purposes. The unit is supplied with a…

The laboratory gas burners for greater security with non-contact IR sensor and functions. The Fuego SCS represents a new class among laboratory gas burners. With its innovative design and the extensive standard equipment, this laboratory gas burner is suitable for all flame related…

When an extremely hot flame is required, these Meker-type burners form uniform blue cones of intese heat with no backflashes. Onepiece, nickel-plated venturi tube. Die cast, zinc alloy, nickel plated octagonal base. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for…

Ideal for intermittent use without frequent relighting. The burner features a sleeve-type air regulator and stopcock for gas control and an integral pilot light tube with screw for adjusting the pilot flame. Specifications: Gas type: Natural Inlet OD: 3/8" (10mm) CFH*: 5.3 …

This product includes 3 each of the Burner Head o-ring, inorganic end cap o-ring, and impact bead o-ring, 5 organic end cap o-rings, and 2 end cap/impact bead o-rings.

NEOPRENE Premium quality neoprene tubing hose is flexible, safe, and resilient - perfect for any science laboratory 2 FEET Tubing is 2 feet (0.6m) in length, making the hose ideal for general laboratory setups FITS STANDARD GAS INLETS Designed for connecting a standard 8-10mm diameter…

Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

Bunsen Burner, LPG - StabiliBase, Anti-Tip Design SIMPLE DESIGN This basic Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. Features air flow adjustment sleeve. Burner is designed to have the flame controlled via the valve…

High temperature bunsen burner with adjustable control. Has fine-pitch threaded valve, 1-1/4 in. diameter and perforated monel and wire mesh heat intensifier. Die cast, zinc alloy, nickel plated octagonal base. For use with all gases. *Note: CFHs and BTU Outputs are figured on: 5 inch Water…

Micro Bunsen Burner, LPG - StabiliBase Anti-Tip Design The micro Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. This burner is equipped with an air flow adjustment sleeve. The total height of the burner is its best…

Gasprofi 1 SCS micro - Series: Safety and comfort in the smallest possible space. Optimal for all flame-related applications in the laboratory. Simply safe to operate Depending on the model, the Gasprofi 1 SCS micro - Series can be operated with touch free IR-Sensor, button function or…

PACK OF 1000 1000 wooden splints for use in various science experiments LONG Long, thin strips of soft drywood that light easily are helpful in demonstrating oxygen's presence and support of combustion MULTIUSE Great for numerous tasks including safely lighting bunsen burners, chemically…

Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3 ft. long.

The Argos FireStar™ units are compact, safe and versatile Bunsen burners that operate with either house gas or disposable gas cartridges. The FireStar features UV resistant stainless steel housing and a removable burner head for easy cleaning. The dual knobs for adjusting gas and air flow…

The Fuego-Series sets new standards in the Laboratory gas burner technology. With an innovative design, this security laboratory burner is suitable for all flame applications in the laboratory Modern design Striking: the unmistakable shape. The low profile body facilitates…

Bunsen Burner, LPG - Flame Stabilizer, StabiliBase Anti-Tip Design SIMPLE DESIGN This basic Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. Features air flow adjustment sleeve and brass flame stabilizer. Burner is designed…

Used to protect flame from drafts. The unit features a set of spring clips designed to fit 7/16" to 5/8" (11mm to 16mm) burner tubes. The cone is spot-welded and is 2" (51mm) in diameter at the bottom.

This bleeder valve unit provides small needle-sized to large brush flame patterns for fusing ore, working Pyrex and soft glasses, and performing other high-temperature melting applications. Extremely accurate flame direction, from three interchangeable burner tips, a telescoping mixing tube sleeve,…

Generate a 2,400F (1,300C) pinpoint flame for a wide variety of torch applications. Units are self-igniting and have an adjustable flame. Unit shipped empty, order butane separately. Synonyms: butane torch; butane torches; mini torch

Designed for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 …

Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

Premium Meker Bunsen Burner, LPG - StabiliBase Anti-Tip Design PREMIUM DESIGN The Meker Bunsen burner is designed for finely controlled air and gas mixture. Provides a safe, continuous stream of flammable gas used for heating, sterilization and combustion. This burner produces a…

Switching power supply for global electricity supply for Fuego series, Gasprofi 1 micro series, Flame 100/110, Gasprofi (as of serial no. 07xxxxx) and charging station Art.-No. 8.000.911 / 8.000.900

Required for the determination of refractory metals when using nitrous oxide-acetylene flames. Can also be used for air-acetylene. Can be rotated with most instruments to reduce sensitivity.