Burners

Compare Tool

Select up to 3 products

1 - 32 of 57
Sort
View
Show
  • Tirril Burners with Pilot Flame

    Humboldt

    The Tirril Burner with Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Provides separate control of both…

  • Bunsen Burner, Tirril

    United Scientific Supplies

    Natural Gas with Flame Stabilizer Tirril Bunsen Burner

  • Flame 100

    WLD-TEC

    The safe alternative for traditional Bunsen burner or alcohol! Flame without a match Innovative Security Technology Easy-to-use Low cost and environmentally friendly Minimum space requirement Multi-Talented The Flame 100 is ideally suited for all flame…

  • Adjustable Micro-Bunsen Burner with Adjustable Gas Valve

    Humboldt

    Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Ultratorch 3 Multi-Purpose Burner

    Master Appliance

    Butane-powered Soldering Iron, Flameless Heat Tool and Torch Triple function soldering iron, flameless heat tool and brazing torch Features oxygen-free, copper based Ultratip. Soldering tips, with thick iron and chrome plating for long life and high thermal conductivity Cordless and…

  • Scienceware® Piezoelectric Gas Lighter

    Bel-Art - SP Scienceware

    Requires no batteries or fuel Push-button trigger Weighs only 3.1 ounces The small, self-contained piezoelectric generator produces sparks at 20 Kv. Lighter can be used to light bunsen burners, gas stoves, propane torches or oxy-acetylene torches. Plastic pistol-grip provides…

  • Burner Gas Connector

    Humboldt

    Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3 ft. long.

  • High-Temperature Adjustable Burner

    Humboldt

    High temperature bunsen burner with adjustable control. Has fine-pitch threaded valve, 1-1/4 in. diameter and perforated monel and wire mesh heat intensifier. Die cast, zinc alloy, nickel plated octagonal base. For use with all gases. *Note: CFHs and BTU Outputs are figured on: 5 inch Water…

  • Utility Blast Burner

    Humboldt

    This burner features a removable nozzle with perforated tip and orifice designed to aim a large, hot, pointed flame in a modified M.I.T. pattern with great accuracy. A universal ball joint positions the flame easily for working large pieces of hard glass. Separate needle valves with leak-proof…

  • Adjustable Burner with Adjustable Gas Valve & Flame Stabilizer

    Humboldt

    Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Powerjet 2 Mobile Burner

    WLD-TEC

    The mobile handheld laboratory gas burner powerjet 2 - The solution for all flame sterilization work in the microbiology or biotechnical fields. The burner is lit as soon as the bar is pressed. The flame can be regulated in size and is extinguished by release of the bar. Additionally…

  • General Purpose Tirril Burners

    Humboldt

    These noiseless burners provide a clear flame of any desired height from 1/2" (12.7mm) to 12" (305mm), with separate control of both flame temperature and flame length. The burners incorporate threaded aluminum air control sleeves and precision machined, fine-pitch brass needle valves…

  • Beaker Handle Kit

    Humboldt

    Adjustable Band Clamp Kit for making a great carrying handle on beakers of all sizes.

  • Pipe Mounting-Type Burner

    Humboldt

    Designed for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 …

  • Three-Slot Burner Head for air-acetylene flames.

    PerkinElmer

    Does not clog as easily when concentrated solutions are used. Cannot be used for the models 5100(PC), 4100, 2100, or 1100(B)

  • Flame Shield

    Humboldt

    Used to protect flame from drafts. The unit features a set of spring clips designed to fit 7/16" to 5/8" (11mm to 16mm) burner tubes. The cone is spot-welded and is 2" (51mm) in diameter at the bottom.

  • Self-Starting Micro Torch Burner

    Blazer

    Small, portable, lightweight unit with built-in piezoelectric crystal for ignition Operates on butane gas Maximum flame temperature 1,300°C (2,400°F) Flame lasts up to two hours on a full charge of butane; reservoir capacity 26 grams Flame adjusted by means of needle valve…

  • Burner Wing Tops

    Humboldt

    Designed to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other similar applications. Made of brass.

  • Alcohol Lamp

    Boekel

    135 ml capacity Conical, low profile design is more stable and much safer than glass alcohol lamps Supplied with snuffer cap and one extra wick Height: 8.9 cm (31⁄2") Diameter: 10.2 cm (4") Two Way Lamp Stand Used to vary distance between heated vessel and alcohol lamp …

  • Nitrous Oxide Burner Head for PerkinElmer 1100(B), 2100 and 4100 AA…

    PerkinElmer

    Required for the determination of refractory metals when using nitrous oxide-acetylene flames. Can also be used for air-acetylene. Can be rotated with most instruments to reduce sensitivity.

  • Switching Power Supply

    WLD-TEC

    Switching power supply for global electricity supply for Fuego series, Gasprofi 1 micro series, Flame 100/110, Gasprofi (as of serial no. 07xxxxx) and charging station Art.-No. 8.000.911 / 8.000.900

  • SteriMax

    WLD-TEC

    Annealing without a flame! All stainless steel Long - Life double-pipe system Sterilization time 5-7 seconds Itself into angular adjustment Available in two sizes The electrical sterilization SteriMax is best suited for the sterilization of inoculation loops, needles and…

  • Tirril Burner for Small-Scale Burning Test

    Humboldt

    The Tirril Burner for Small-Scale Burning Test (ASTM D5025) supports the following standards: ASTM D5025 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Supplied complete with…

  • Standard Burner with Air Regulator Only

    Humboldt

    Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Fuego SCS

    WLD-TEC

    The laboratory gas burners for greater security with non-contact IR sensor and functions. The Fuego SCS represents a new class among laboratory gas burners. With its innovative design and the extensive standard equipment, this laboratory gas burner is suitable for all flame related…

  • Gasprofi Laboratory Gas Burners

    WLD-TEC

    Gasprofi 1 SCS micro - Series: Safety and comfort in the smallest possible space. Optimal for all flame-related applications in the laboratory. Simply safe to operate Depending on the model, the Gasprofi 1 SCS micro - Series can be operated with touch free IR-Sensor, button function or…

  • FireStar™ Bunsen Burners

    Argos Technologies

    The Argos FireStar™ units are compact, safe and versatile Bunsen burners that operate with either house gas or disposable gas cartridges. The FireStar features UV resistant stainless steel housing and a removable burner head for easy cleaning. The dual knobs for adjusting gas and air flow…

  • National Blast Burner Tips

    National Keystone

    Type N tips are used with compressed air Type OX tips are used with oxygen

  • Burner Tops

    Humboldt

    Various tops for use with Humboldt burners.

  • Standard Micro-Bunsen Burner with Air Regulator Only

    Humboldt

    Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections.  *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners.…

  • Pilot Flame Burner

    Humboldt

    Ideal for intermittent use without frequent relighting. The burner features a sleeve-type air regulator and stopcock for gas control and an integral pilot light tube with screw for adjusting the pilot flame. Specifications: Gas type: Natural Inlet OD: 3/8" (10mm) CFH*: 5.3 …

  • Standard Burner with Air Regulator Only & Flame Stabilizer

    Humboldt

    Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.