Benefits The reliable AW Quick mode for quick results (typical 4 - 5 min) 4 probe inputs for simultaneous or asynchrony measurements Standalone laboratory measuring device with 7” touch screen Remote access with PC or Tablet Firmware updates over the internet …

Provides dual entry into a variety of flasks BEVEL-SEAL adapters allow temperature measurements at either top outer opening. Useful for reflux with addition- type reactions. Adapter consists of two female standard taper joint fittings at the top and one male standard taper joint at the bottom.…

The LabStrong cartridge kit is comparable to the Thermo Scientific Barnstead cartridge kit. Side-by-side testing shows fantastic results for purity and longevity. The cartridge kit is used with the Thermo Scientific Barnstead NANOpure* Quad Style water purification systems. The cartridge kit is an…

Our four grades of disposable Ion-X-Changer filter cartridges withstand water pressures as high as 100 psi for safe hookup to any laboratory tap water system. Cartridge resins turn amber to indicate when cartridges need to be changed. All cartridges must be used with mounting brackets (order…

Qualification documents Binder digital in PDF format - IQ/OQ documents, Qualification documents Binder hard copy inside folder - IQ/OQ documents - supporting documents for validation performed by customers, consisting of: IQ/OQ checklists incl. calibration guide and comprehensive unit…

Technology Activated Carbon Reverse Osmosis Ion-Exchange  

Angled hose connector for LabStrong™ Fi-Streem™ II and III stills. Parts are typically available to ship immediately to limit down time in the lab.The glass condenser is a replacement part for the Fi-Streem™ Water Purification Stills. The LabStrong™ Fi-Streem™ part number 562X1LS is the direct…

60° angle Three Standard Taper 24/40 joints Approximate length 206 mm This tube is also a replacement for organic chemistry kits. Type I, Class A borosilicate conforming to federal specification DD-G-54 lb and ASTM E 438. Also meets the US Pharmacopoeia specs for Type I borosilicate glass.

The black “T” piece of John Guest fitting (PM-012) is a replacement part for the Fi-Streem™ Water Purification Stills.

Vivacon centrifugal concentrators offer the optimal solution for DNA and protein concentration and buffer exchange applications. For optimal performance with very dilute samples, e.g. forensic samples, Vivacon is equipped with the patented regenerated cellulose membrane Hydrosart. High recoveries…

Range: 0.000 to 1.999 µS/cm Accuracy: 2% full scale Compact size fits in a lab coat pocket Fast read-out on a large LCD Ideal for deionized or distilled water. Easily checks 1 to 50 MegOHM water on the spot. Inexpensive method to guarantee the quality of your water.…

Solid Phase Extraction, Spe-ed Quality for Reliable and Reproducible Results Choose Spe-ed SPE products for the highest quality cartridges and the greatest selection available.   SPE Products from Applied Separations offer:   Medical grade…

Vivapore 10/20 is a ready-to-use benchtop concentrator for samples up to 20mL. With no need for additional equipment, pressure or vacuum source, solvent absorption is the most economic and user friendly concentration technique available for clinical and general research applications. Just fill the…

Maintain the performance of your still with Thermo Scientific™ Barnstead™ Classic Stills Replacement Consumables. Replacement UV Lamp Bulb for Barnstead classic stills reservoirs with UV Light Assembly (H4005)

Distilling receiver for use where separate fractions are desired without disturbing distillation pressure. Joints are 24/40. Receiver is 5 mL. Hose connection is size B, for use with 5/16in (7.9mm) or 3/8in (9.5mm) ID tubing. For version with 14/20 joints, or PTFE- clad version with 14/20 joints,…

WaterPro® BT System produces both RO-purified and Type I water packaged in a compact all-inone benchtop design For laboratories needing 1-10 liters per day, the WaterPro BT System, delivers ultrapure Type I*, up to 18.2 megohm-cm at a typical rate of >0.5 liter per minute** at inlet…

Vivacell 100: Sample concentration from 20 to 100 ml in swing bucket rotors accepting 250 ml centrifuge bottles. For highest speeds or for particularly difficult samples, pressurize the device with air or inert gas before centrifuging with pressure cap.

Reservoir float switch, 2 posn. 4 pin, for LabStrong™ Fi-Streem™ III still. Parts are typically available to ship immediately to limit down time.

The LabStrong 740883LS replacement heating element is comparable to the Thermo Scientific Barnstead 740883 and 740895 replacement heating elements. The LabStrong 740883LS is an economical and reliable replacement heating element for Thermo Scientific Barnstead Mega-Pure Glass Stills. The 240V 2500w…

For Milli-Q® Element and Q-POD® Element systems. Dedicated to elemental trace analysis (ppt or sub-ppt).

Connecting 105° angle, two-way,  Standard Taper joints The arms are appraoximately 105° apart One end is equipped with an outer Standard Taper joint and the other end with an inner Standard Taper joint of the same size Used as a receiver adapter 3941S38 is a…

The arium® comfort I is a combined system for producing ASTM Type 1 ultrapure water and Type 3 pure water. This system features the latest reverse osmosis technology and a unique filter cartridge to deliver water of the highest reproducible quality. The arium® comfort I consistently…

The LabStrong B00122 20 Liter HDPE water storage carboy allows for fully automatic operation when connected to Fi-Streem III Stills (A56210-857LS, A56218-857LS, A56220-857LS, A56228-857LS, A56230-857LS and A56238-857LS). The LabStrong B00123 20 Liter HDPE water storage carboy allows for fully…

The FC S Series is a multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. FC S Series is available in two configurations: FC4S, with 4 independent positions FC6S,…

Vivapore 5 is a ready-to-use benchtop concentrator for samples up to 5mL. With no need for additional equipment, pressure or vacuum source, solvent absorption is the most economic and user friendly concentration technique available for clinical and general research applications. Just fill the unit…

These PYREX® connecting distilling tube adapters have full-length inner 24/40 Standard Taper joints of same size. The connecting arm is approximately at a 75° angle from vertical and is 200mm long.

Solenoid Valve Assembly for MegaPure Stills. Replacement for Models: MP-3A, MP-6A, MP-11A

Angled two neck round bottom flask. Two-neck heavy wall flask with 24/40 Standard Taper outer joints Side neck is angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

For Simplicity® systems with Elix® / RO / distilled water feed.

The Ultrafilter Assembly fits the Nanopure Biological UF and Life Science UV/UF, and the Easypure II UF and II UV/UF. Absolute filtration down to 0.2 micron Pyrogen-free water Large surface area for long life

The preformed nylon pipe, S/V to “T” piece is a replacement part for the four liter and eight liter per hour bi-distilled Fi-Streem™ Water Purification Stills. The LabStrong™ Fi-Streem™ part number 857X28LS is the direct replacement of the Thermo Fisher…

Vivaflow 50 and 200 systems are ready-to-use ultrafiltration modules for crossflow filtration of samples up to 5 Liters. These novel systems offer a standard of ease of use, performance, flexibility and economy which is unrivaled by any laboratory or pilot scale filtration system in the market.…