General Lab Products
-
Stainless Steel Bent Harvesting Tube 15L 1/4"x20"
Bellco Glass316l stainless steel bent harvesting tube for 15l flat bottom omni vessel. Use with large flange head-plate. Size: 1/4" x 20" Id: 5/32"
-
3-Port Harvest Assembly 8L
Bellco GlassMaterial: 316l SST with electropolish finish, ra 32 or better, inside & out Dimensions: harvest tube (3/8" od) - 1" above slug, 15" insertion length Addition tube (1/4"od) - 1" above slug, 2 21/64" below Vent tube (1/4" od) - 1" above slug, .975" below Supply with 45mm pp blue open top screw cap &…
-
Impeller Assembly 25mL
Bellco GlassGlass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of ptfe magnet holder and ptfe coated magnet. Glass shaft ptfe magnet Size: 25ml
-
-
Stainless Steel Shaft Assembly 100mL
Bellco GlassManufactured from 316l stainless steel. Impeller assembly for micro-carrier spinner flasks. 1965 series micro-carrier spinner flask Size: 100ml
-
1.7in. Probe Holder 45mm
Bellco GlassBellco stainless steel probe holder is designed to be used with our 45mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow ph and do monitoring via insertion of these probes into the sidearms of the vessels. Threaded probe adapters are…
-
Krytox® LVP grease weight 2 oz (tube)
MilliporeSigmaSimiliar to Krytox 240 AC, except used as high-vacuum grease. 2 oz. tube. R: 36/37/38 S: 26-36 Legal Information: Krytox is a registered trademark of E. I. du Pont de Nemours and Company
-
Manufactured from 316l stainless steel with ra32 finish or better inside and out. The assemblies attach to the headplate.
-
Micro-Carrier Impeller Assembly 100-250mL
Bellco GlassImpeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. Impeller size: 100-250ml Paddle dimensions: 1" x 2"
-
316 l stainless steel construction
-
Size: 1.5ml Material: homo-polymer polypropylene Color: natural Individually wrapped
-
Large Flange Round Bottom Vessel 8L
Bellco GlassHeavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Use with CellTrol ii only single or dual systems, and speed control modules.
-
Digital Micro-Carrier Insect System 3L 230v
Bellco GlassDesigned for growing insect cell cultures such as sf9 and sf21 cells. The system comes complete with all accessories needed to grow your insect culture line for expression. Consist of: 7785-d2015 digital 5-position magnetic stirrer, 230v 1965-03000 micro-carrier spinner flask complete, 3l…
-
Large Flange Flat Bottom Omni Vessel 8L
Bellco GlassHeavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp. Can be used with series 500 controllers or with CellTrol ii (no speed) and…
-
-
-
Valley Heating Blanket 115V-36L-Low Watt 375 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 36l Watts: 375 - low wattage Dimension (in.): 5 x 48 3…
-
Straight Harvesting Tube 10L 1/4"
Bellco GlassMaterial: 316l stainless steel with ra finish of 32 inch or better, inside and out Dimensions: od x id:1/4? x 5/32? x 10.0? long
-
Valley Heating Blanket 115V-36L-HW 1200 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 36l Watts: 1200 (not for CellTrol) see 1964-57365 or…
-
Sparger w/ Holes 3L
Bellco Glass316 l stainless steel sparger assembly with drilled holes for 3-liter bioreactor vessel. .250x.152 Welded flange,"3/8" Silicone 'o' ring
-
Stainless steel curved harvesting tube for 5l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. Size: 5l Dimensions: 1/2 x .430 x 14 1/4"
-
Bellco Heating Blanket 115V-15L 750 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 15l Watts: 750 Dimension (in.): 5 x 33 1/4" 3 latches 6ft…
-
316l stainless steel bent harvesting tube for 36l flat bottom omni vessel. Use with large flange head-plate. Size: 1/2" x 22" Id: .430"
-
Dow Corning® high-vacuum silicone grease colorless
MilliporeSigmaSeals and prevents freezing of stopcocks and ground-glass joints in high-vacuum systems at pressures less than 10-6 mm Hg. Heat stable (-40 to 260 C), low vapor pressure, and chemically resistant. Colorless. 5.3 oz. tube. Legal Information: Dow Corning is a registered trademark of The Dow…
-
Acrodisc Thread Filter pkg.8
Bellco GlassThe ptfe 50 mm Acrodisc hydrophobic filter with hose barbs can be used to sterilize non-aqueous solutions, vacuum line protection, venting and gas filtration. Hose barb end allows easy secure attachment of silicone tubing or other types of tubing. The filter is non sterile and is autoclavable. Has…
-
IOB Impeller Assembly 6L
Bellco GlassStainless steel shaft design prevents cell damage and minimizes magnetic decoupling. Sealed internal assembly requires less incubator space. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 100mm Flask size: 6l Paddle: 6 3/4" x 5" Overall length: 10 1/2"
-
3-Port Sparger Assembly w/ Holes 15L
Bellco Glass316-l stainless steel ra32 or better finish .040? drilled holes sparger for low profile vertical side arm vessels. Threaded end is removable for cleaning. Comes with 45mm blue polypropylene open top cap and silicone gasket. Triple tube configuration with vent, fill/sample and sparge.
-
Large Flange Z/Z Paddle 5L
Bellco GlassManufactured from 316l stainless steel with electropolish finish. Ra 32 finish or better inside and out. Ideal use for cell culture and reduces shear in delicate cell culture. Blade dimension: 5 3/4 x 2 1/2? Shaft oal: 6 1/2? Constructed of 316l electropolished stainless steel Marine impeller…
-
Media Addition Bottle 2L
Bellco GlassHeavy walled construction for cell culture and fermentation applications. Heavy duty o-ring flange creates positive seal for stainless steel head-plate. For use with stainless steel head-plate, o-ring, and locking clamp.
-
3-Port Harvest Assembly 15L
Bellco GlassSize: for standard ohd 15l vessel To fit gl45 vertical sidearms Material: 316l SST with electropolish finish, ra 32 or better, inside & out Dimensions:harvest tube (3/8"od)-1"above slug,16" insertion length, approx Addition tube (1/4"od) - 1" above slug, 2 21/64" below Vent tube (1/4" od) - 1"…
-
Stainless Steal Bioreactor Headplate 3L
Bellco GlassManufactured from 316l stainless steel with ra 32 finish or better inside and out. Fittings are sold separately as part of the system.
-
Stainless Steel Shaft Assembly 1L
Bellco GlassManufactured from 316l stainless steel. Impeller assembly for micro-carrier spinner flasks. 1965 series micro-carrier spinner flask Size: 1l