The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The 12 Position N-EVAP® nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying…

The 24 position MICROVAP evaporator is intended for concentrating small volume, small batch samples, such as concentrations of groups of samples in microcentrifuge tubes and GC vials. It offers an effective and compact solution to evaporation of samples for life sciences and pharmaceutical…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The single plate MICROVAP microplate evaporator is one of the most compact sample concentrators available, and it continues to meet the needs of the life science and pharmaceutical industries. This microplate concentrator is ideal for laboratories needing efficient solutions for the gentle…

The triple plate MICROVAP® microplate evaporator combines three 96 needle manifolds and three heat blocks into a single platform. This allows for simultaneous evaporation of up to three 96 well plates. The triple plate MICROVAP’s solid aluminum heating units provide consistent temperature…

The ROT-X-TRACT-LC® is designed to accommodate up to eight Corning Accelerated One-Step apparatuses (glassware sold separately). The Corning Accelerated One-Step extraction apparatus combines continuous liquid-liquid extraction and concentration into one step. A Freidrichs condenser is used to…

The NITRO-GEN+ Nitrogen Generator (Catalog# NA1935) is compatible with all Organomation nitrogen evaporators up to 100 sample positions, and is designed to fulfill the needs of sample preparation and LC-MS analysis. It is a self-contained generator that is able to produce up to 35 LPM of nitrogen…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The 45 Position N-EVAP® nitrogen evaporator offers the largest number of sample positions in the N-EVAP line. The sample holder has dual circular rings. The outer ring has 30 positions and can accommodate samples with an outside diameter of 10-19 mm. The inner ring has 15 positions and can…

The Automatic 20 Position N-EVAP® is an advanced blowdown evaporator combining classic blowdown technology with timed automation. The unit can run in automatic or manual mode due to the integration of a unique pneumatic system. The automatic mode removes samples from the heating medium when the…

This set includes glassware and connections for the central solvent collection flask. The central collection flask is designed to collect 4 L of solvent from 8 sample positions. The solvent can be drained from the flask through a siphon. Included in GS2158-C8: GP3220-8: Flask central…

Adjustable nitrogen gas flow meter for Organomation N-EVAP Evaporators. 1/4 inch quick disconnect fitting in 1/4 inch swagelok fitting out

Hopkins condenser with tube fitting Dimensions: 50 x 260mm Joints: 24/40 Compatible With: Central collect S-EVAP KD units

The S-EVAP-KD® solvent evaporator combines standard Kuderna-Danish concentration procedures with a unique rotary water bath and manifold, increasing sample throughput and conserving bench space. The instrument comes in 5, 8, and 10 position models. The S-EVAP-KD instruments are available in two…

The NITRO-GEN line of nitrogen gas generators is designed for general lab purposes such as blowdown evaporation. The NITRO-GEN is ideal for labs looking to convert compressed air to high purity nitrogen quickly and inexpensively. At under 20 lbs, the NITRO-GEN is easy to install and move as needed.…

The ROT-X-TRACT-S® rotary Soxhlet extractor can accommodate up to 8 or 10 Soxhlet extractors. The bath cover disk holes can accommodate round sample flasks from 125 mL to 1 L. A wide range of sample sizes and quantities make this instrument ideal for Soxhlet extraction of samples in any lab. …

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The 15 position MICROVAP evaporator is intended for small batch solvent evaporations, such as concentrations of sample groups in microcentrifuge tubes. It offers an effective and compact evaporation solution for samples in life science and pharmaceutical laboratories. Each MICROVAP uses minimal…

Accessories and parts for use with Organomation evaporators: NA0630 Adjustable pressure reducing gas regulator for all N-EVAPs and MICROVAPs. Regulator accepts 30-160 psi input. NA0636 Pasteur pipette adapters allow Pasteur pipettes to be used instead of stainless steel needles in…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

Blunt end (90° cut) stainless steel needles with a luer lock fitting, used for nitrogen gas blowdown. Available with chrome plated or polypropylene hubs. Optional FEP coating protects against corrosive solvents. 4 inches long 16 or 19 gauge

The 6 position N-EVAP’s ability to expand the sample size range with an optional large sample holder makes it an ideal instrument for laboratories that will be evaporating up to 6 samples at once and are using a wide range of sample flask outside diameters. The standard instrument fits…

The 24 Position N-EVAP® is Organomation’s most adaptable evaporator. The basic model offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. The standard sample holder can…

The S-EVAP-RB® solvent evaporator for round flasks allows for up to 8 or 10 samples to be concentrated at once. S-EVAPs have a broad range of applications including oil and grease analysis using hexane and other approved solvents and concentrating extracted materials from Soxhlet operations.…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The 34 Position N-EVAP® nitrogen evaporator offers a large number of sample positions, without compromising any of the classic N-EVAP features. This time-tested, durable system provides one of the least expensive prices per position of the N-EVAP line. The evaporative system, along with the…