Gas Flow Meter

Compare Tool

Select up to 3 products

Gas Flow Meter
1 - 32 of 49
Sort
View
Show
  • Restek ProFLOW 6000 Electronic Flowmeter

    Restek

    …type of chromatography gas measurement because of its wide range of capabilities. The ProFLOW 6000 is an electronic meter capable of measuring volumetric flow for most gases. Real-time measurements can be made for various types of flow paths, including continually changing gas types. This portable…

  • Riteflow® Aluminum Mounted Flowmeters

    Bel-Art Products

    Used for flow measurements in the lab, process flows in pilot plants, metering carrier gases in chromato graphy, indicating and controlling gases in manufacturing processes and for indicating flow rates in pumping or flow systems. Formed from heavy-walled, shock-resistant borosilicate glass, these…

  • Shielded Liquid And Gas Flowmeters

    Barnant

    Chemically compatible, Teflon® and glass construction Accuracy ±2% of reading Calibrated/correlated Repeatability ±1% Choose shielded flowmeters for use at higher pressures. Otherwise similar to 5080K01 series. Clear polycarbonate shield adds strength and…

  • Roto-Flo™ Flow Indicators

    Bel-Art Products

    Instant visualization of flow in a tubing line Brightly colored indicator polypropylene paddle wheel Fits tubing I.D.: 4mm to 7mm (1/4" to 5/16") Tube ends: Barbed The flow indicator provides immediate visual indication of water, air or gas flow, when the paddle wheel…

  • Calibrated Flowmeters For Liquids And Gases

    Barnant

    …capability, see 5080K60 series). Specially designed Teflon® stops allow standard taper joints with precision bore ends to be attached to meter; O-ring seal makes this connection vacuum tight. Standard flowmeters feature small outside diameters, require minimal space and fit into streamlined…

  • Soap Film Flowmeters

    Wilmad LabGlass

    …bubble flowmeters are used in routine analytical laboratory gas chromatography to measure flow rate of the carrier gas. A soap bubble, formed in the bottom of the graduated tube, is pushed upward by gas from exit end of the chromatograph. Flow rate is determined by measurement of the volume through…

  • 65 mm Industrial Flowmeters With Standard Valve

    Barnant

    …mounting hardware is supplied with each meter, and tripod bases are available for bench top applications. Calibrated tables for air and water are included with each meter. Flow analysis software is available (Thomas number 5080L82) to generate accurate flow tables for an infinite number of…

  • ADM Flow Meters

    Agilent Technologies

    …instrument provides continuous, hands-free flow readings. Users can measure column, detector, and carrier gas flows without any adjustments. ADM flowmeters are suitable for measuring gas streams with a changing gas composition. If measuring the gas flow from a digestion system, concentration…

  • Micro Control Valves

    SGE

    SGE's microcontrol valves provide precision metering and on-off control of gas flows. They are designed specifically for chromatography applications and may be used at elevated temperatures from high vacuum to medium pressure. The valves are vacuum rated to a leak rate of 1 x 10- 5 cc/sec of…

  • Scienceware® Flow Monitors

    Bel-Art Products

    Flow Indicator (5084A04) Clear polystyrene Provides immediate visual indication of water, air or gas flow, indicating continuity and relative flow rate Minimum flow rate to actuate the ball with water is 50 mL/min. in horizontal position, 140 mL/min. in vertical position. With…

  • Glass Bubble Flow Meters

    Agilent Technologies

    Economical 10 or 100 mL These glass bubble flowmeters provide an economical way to monitor gas flow.

  • Riteflow® PTFE Mounted Flowmeters

    Bel-Art Products

    Used for flow measurements in the lab, process flows in pilot plants, metering carrier gases in chromato graphy, indicating and controlling gases in manufacturing processes and for indicating flow rates in pumping or flow systems. Formed from heavy-walled, shock-resistant borosilicate glass, these…

  • Direct Reading Flowmeters

    Matheson Instrument

    Controls and directly indicates flow rate of gas or air Meter body, 25 x 25 x 95 mm high, is transparent acrylic plastic block with aluminum support frame, mounted on acrylic base. Cylindrical, tapered bore contains ball float. Metric scale is fused on face of block. Multi-tapered manual control…

  • Meter Valves

    Swagelok

    …(stainless) 1/8“ and 1/4“ tube fittings Metering valves gives very fine control of gas flow between 100 and 800 cc/min. Valve is not designed for shutoff service. The handle dead stop is factory set at a flow rate of 3 to 10 cc/min with 15 psig inlet air pressure. 8 to 12…

  • Scienceware® Riteflow® Guarded Flowmeters

    Bel-Art Products

    Used for flow measurements in the lab, process flows in pilot plants, metering carrier gases in chromato graphy, indicating and controlling gases in manufacturing processes and for indicating flow rates in pumping or flow systems. Formed from heavy-walled, shock-resistant borosilicate glass, these…

  • Gilmont Accucal Flowmeters

    Barnant

    …and direct reading in one easy-to-read meter Accuracy up to ±2% of reading Interchangeable scales to customize applications Extremely low pressure drops for procedures with critical pressure values Precision valves Each meter includes correlation charts for air and…

  • Rotameter, Needle Valve, Compact, Ace-Thred

    Ace Glass

    Used to regulate and measure flows, all working parts and indicia are visible, meter readings are unobstructed; the outlet swivels 360 degrees. Pressure tight to 2Kg/cm2 or more (air). Flow rates from 5 to 50L/minute air or 0.1 to 500cc/min water. Each tube is furnished with either a 316 stainless…

  • Flow Indicators

    Dynalon

    …I.D.   Flow Indicator (1211Y77) Product Dimensions (l x w x h) : 4x0.553x2.254in This flow indicator is transparent, leakproof, ultrasonically molded and fitted with a  polypropylene ball. It allows an immediate visual indication of gas or liquid flow by means of the…

  • Detector Make-Up Gas Kit

    PerkinElmer

    For use with TCD (at low flow rates). Required when using 0.25mm i.d. and recommended when using 0.32mm i.d. capillary columns. Kit includes one meter of 1/16in. tubing to connect gas supply, graphite/vespel ferrules, pneumatics, and installation instructions.

  • MICROVAP® Triple Microplate Evaporators

    Organomation

    …L/min flow meter is included for precise control over the nitrogen gas delivery system. Advantages: High throughput: Evaporate up to three 96 well plates at once Ease of use: Temperature and gas levels are easily set using the digital temperature controller and gas flow meter

  • MICROVAP® Microplate Evaporators

    Organomation

    …evaporators Ease of use: Temperature and gas levels are easily set using the digital temperature controller and gas flow meter Versatility: Quickly converts between models for use with both plate and tube samples, using dry block and gas manifold conversion kits Standard Features:…

  • 24 Position MICROVAP® Small Batch Evaporators

    Organomation

    … Ease of use: Temperature and gas levels are easily set using the digital temperature controller and gas flow meter Versatility: Quickly converts to a 15 position MICROVAP or single position MICROVAP microplate evaporator using dry block and gas manifold conversion kits Standard…

  • 15 Position MICROVAP® Small Batch Evaporators

    Organomation

    … Ease of use: Temperature and gas levels are easily set using the digital temperature controller and gas flow meter Versatility: Quickly converts to a 24 position MICROVAP or single position MICROVAP microplate evaporator using dry block and gas manifold conversion kits Standard…

  • 1400°C Max Controlled Atmosphere Muffle Furnaces

    Across International

    …test results. All our furnaces are CE compliant. Features Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas. Furnace chamber is welded and oil leak tested to ensure air tightness.…

  • 1700°C Max Controlled Atmosphere Muffle Furnaces

    Across International

    …test results. All our furnaces are CE compliant. Features Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas. Furnace chamber is welded and oil leak tested to ensure air tightness.…

  • 1100°C Max Controlled Atmosphere Muffle Furnaces

    Across International

    …test results. All our furnaces are CE compliant. Features Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas. Furnace chamber is welded and oil leak tested to ensure air tightness.…

  • 1100°C Stainless Steel Controlled Atmosphere Furnaces

    Across International

    …interior finish for ultra clean operation and easy maintenance Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas. Furnace chamber is welded and oil leak tested to ensure air tightness.…

  • 100 Position MULTIVAP® Nitrogen Evaporators

    Organomation

    …In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 10 samples, which allows individual rows to be shut off when evaporating batches of less than 100 samples. Nitrogen gas flow is also controlled by an adjustable flow meter and a built in pressure regulator.…

  • 64 Position MULTIVAP® Nitrogen Evaporators

    Organomation

    …In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 8 samples, which allows individual rows to be shut off when evaporating batches of less than 64 samples. Nitrogen gas flow is also controlled by an adjustable flow meter and a built in pressure regulator.…

  • Rt-Alumina BOND/CFC Columns (fused silica PLOT)

    Restek

    …manufactured on fused silica tubing; select phases are also available on metal MXT tubing. To ensure reproducible retention times and predictable flow behavior column to column, each Rt-Alumina BOND column is extensively tested. A hydrocarbon test mix confirms proper phase retention and…

  • FP Series High-Performance Muffle Furnaces

    Yamato

    …automatic overheat prevention device and independent overheat prevention device Optional items include exhaust system, N2 gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication…

  • Bubble Flowmeter Accessories And Replacement Parts

    Agilent Technologies

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.