General Chromatography Gas Managements

General Chromatography Gas Managements

Products (133)

Compare Tool

Select up to 3 products

  • ASSET® EZ4 Dry Samplers pkg of 50 ea

    Synonyms: ASSET® EZ4-NCO Dry Sampler Legal Information: Asset is a registered trademark of Sigma-Aldrich Co. LLC

  • radiello(TM) Diffusive Bodies white, configured for general use

    The diffusive bodies are designed to house Radiello cartridge adsorbents during sampling. The diffusive bodies are threaded at one end for easy attachment to the Radiello triangular support plate. Unlike most of the cartridge adsorbents, the diffusive bodies are reusable and can be cleaned with a...

  • Chemical Filters/Traps For 5890

    These filters are packed with molecular sieve 5Å, 60/80 mesh, and can be reconditioned by heating in the GC oven. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders...

  • Male Connector

    Agilent Technologies

    Agilent GC fittings and GC nuts for instrument plumbing are available in brass, stainless steel, and UltiMetal Plus, and in sizes ranging from 1/16 to 1/4 inch. Application: For Gas Clean Connecting Unit This product is only available to U.S. Domestic Customers. For research use only, not to be used...

  • Sample cylinder plug brass

    The 1/4 in. NPTM square head plug fits all Sure/Pac sample cylinder sizes.

  • Gas Clean Purification System

    Agilent Technologies

    The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of...

  • Female Luer to ¼ in. Hose Barb (nylon)

    Synonyms: Air Sampling Pump Accessories

  • ReNEWable Gas Purifier - System Manual

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Gas Clean Purifier Kit

    Agilent Technologies

    The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of...

  • Hydrocarbon Traps

    Agilent Technologies

    Remove organics from carrier gases, air and hydrogen High capacity 200 cc of filtering media Impregnated carbon filter media Refill includes media for two recharges of HT200 Series Hydrocarbon Trap Agilent Technologies products are intended for sale/shipment within the US only. International...

  • GC Installation Kits

    Agilent Technologies

    Agilent Installation Kits for GC are designed to provide you with the essential items necessary for a successful installation while providing a substantial cost savings over individual purchases. GC Basic Installation Kit: Includes copper tubing, column nuts, two moisture traps, and five wrenches....

  • Economy Indicating Refillable Moisture Traps

    Agilent Indicating Moisture Traps are designed to remove water, oil, and organics from gases employed in, but not limited to, gas chromatography. Refillable moisture traps are constructed from Lexan brand polycarbonate tubing. Lightweight, chemically resistant and of superior strength when compared...

  • Replacement Gas Clean Sensor

    Agilent Technologies

    A sensor that connects to the GC via USB to monitor chemical indicator and alert the user when to replace the filter. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Aldrich® reducing adapter female Joint

    Synonyms: glass adapter; glass adapters Legal Information: Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

  • Chem-FLEX(TM) transfer line tube

    Two 12 gauge SS needles (6 and 18 in.) are connected to the CHEM-FLEX 106 tubing with nylon clamps. Liquids contact only PTFE and SS during transfers. For extra security when using large bore transfer needles, fasten septum to bottle or flask opening with a wrap-it tie.The nylon clamps are...

  • Glass Indicating Moisture Trap

    Agilent Technologies

    Our GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps...

  • radiello(TM) Cartridge Adsorbents

    Several different Radiello cartridge adsorbents are available. Each of which are specific for sampling different classes of compounds. The dimensions for each cartridge are 60 mm L x 4.8 or 5.8 mm D. Each cartridge is designed for one time use with the exception of Radiello thermal desorption (TD)...

  • Gas Clean Purification System

    Agilent Technologies

    The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of...

  • Gas Clean Filter Kit

    Agilent Technologies

    The Agilent Technologies 1/4 Inch gas clean filter kit is suitable for use with carrier gas system. Application: For Carrier Gas This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Precision Gas Flow Meter

    Agilent Technologies

    The Agilent Technologies precision gas flow meter has a flow range of 5 to 500 mL/min and maximum altitude at operating environment is 2000 meters. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Gas Clean Purifier Kit

    Agilent Technologies

    The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of...

  • Sure/Pac(TM) steel sample cylinder

    Provides a convenient and safe method for shipping, storing, and dispensing research quantities of air-sensitive liquids or liquefied gases whose reactive nature or pressure precludes use of glass bottles. Because Sure/Pac cylinders are made of steel they are virtually unbreakable, and their wider...

  • Gas Clean Connecting Unit

    Agilent Technologies

    The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of...

  • 2L Tedlar® SCV Gas Sampling Bag w/Thermogreen® LB-2 Septa

    Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags...

Compare Tool

Select up to 3 products