Nitrogen Evaporator

…mm Gentle : N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to gently concentrate delicate samples Individualized Control : Gas flow can be controlled at each sample position via needle valves Standard Features: Nitrogen filter Adjustable flow…

…either a heated water bath for evaporations 30-90°C or an unheated stand for evaporations at ambient temperature. Corrosion resistant FEP coating is available for use with strong acids. Advantages: Gentle : N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to…

…34 Position N-EVAP® nitrogen evaporator offers a large number of sample positions, without compromising any of the classic N-EVAP features. This time-tested, durable system provides one of the least expensive prices per position of the N-EVAP line. The evaporative system, along with the standard…

…N-EVAP® nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying evaporation end…

…in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 100 position MULTIVAP nitrogen evaporator (Catalog# 11300) is…

…in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 64 position MULTIVAP nitrogen evaporator (Catalog# 11364) is…

…in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 48 position MULTIVAP nitrogen evaporator (Catalog# 11848) is…

…in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 80 position MULTIVAP nitrogen evaporator (Catalog# 11880) is…

…in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which allow gas flow to individual rows to be shut off when evaporating batches at less than full capacity. The 30 position MULTIVAP nitrogen evaporator (Catalog# 11830) is…

…evaporation at ambient temperature. Corrosion resistant FEP coating is available for use with strong acids. Advantages: Flexible : A large sample holder option can be added to accommodate vials with a larger outside diameter in the range of 30-75 mm Gentle : N-EVAP nitrogen evaporators…

…method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 3 samples, which allows the individual rows to be shut off when evaporating batches of less than 9 samples. Nitrogen gas flow is also controlled…

…sample instrument can be chosen to accommodate vials with a larger outside diameter in the range of 30-54 mm Gentle : N-EVAP nitrogen evaporators combine nitrogen blow down with a heated bath to gently concentrate delicate samples Individualized Control : Gas flow can be controlled at each…

…and evaporator for high throughput laboratories. The nitrogen blowdown process is ideal for lower boiling point organic solvents such as methanol, dichloromethane, hexane and acetonitrile. The robust design of the MiniVap(R) Gemini joins together two individually temperature-regulated evaporation…

The NITRO-GEN+ Nitrogen Generator (Catalog# NA1935) is compatible with all Organomation nitrogen evaporators up to 100 sample positions, and is designed to fulfill the needs of sample preparation and LC-MS analysis. It is a self-contained generator that is able to produce up to 35 LPM of nitrogen…

The NITRO-GEN line of nitrogen gas generators is designed for general lab purposes such as blowdown evaporation. The NITRO-GEN is ideal for labs looking to convert compressed air to high purity nitrogen quickly and inexpensively. At under 20 lbs, the NITRO-GEN is easy to install and move as needed. …

…concentrated nitrogen output stream and an oxygen enriched permeate stream, which is vented from the system. The combination of these technologies produces a continuous on demand supply of pure nitrogen. Typical applications include: LC-MS, nebulizer gas, chemical and solvent evaporation, instrument…

…Benefites Ideal for any combination of sample evaporators up to 100 nozzle positions Produces clean, dry (to -20°F) dewpoint evaporator grade nitrogen from any standard laboratory compressed air source Accelerates evaporation by decreasing the partial vapor pressure above the solvent…

…Nitrogen Generator without air compressor Produced by Parker Balston® the Membrane Nitrogen Generators are designed to supply single or multiple LC/MS instruments with dry nitrogen at purities of 99% to 99. 5%. The generator can also be used for solvent evaporation as well as supplying dry nitrogen…

…dispensing of liquid nitrogen can now be accomplished safely and efficiently with liquid dewars from American Biotech Supply. These super insulated dewars have minimal evaporation rates and are available for pouring, pressurized dispensing and dipping of liquid nitrogen. These high efficiency,…

…separate the air into a concentrated nitrogen stream. Typical applications include LC/MS, LC/MS/MS, nebulizer gases for APCI and ESI, ELSD, Turbo Vaps and chemical solvent evaporation. The safe, convenient and cost effective method of providing high purity nitrogen for your LC/MS Proven Technology…

…evaporation via 2 inch x 19 gauge stainless steel needles. A version without heat is available for evaporations that will be performed at ambient temperatures. Advantages: Compact design: The MICROVAP product line has the smallest footprint of all of Organomation’s nitrogen…

…microplate evaporator combines three 96 needle manifolds and three heat blocks into a single platform. This allows for simultaneous evaporation of up to three 96 well plates. The triple plate MICROVAP’s solid aluminum heating units provide consistent temperature for uniform evaporation rates…

…In the absence of a Rotavapor the Stand-alone Setup provides a comprehensive, sophisticated and independent evaporation system. In contrast to nitrogen blow-down evaporators, evaporation under vacuum is in accordance with the regulations of ISO 14000 that guarantees the smallest possible negative…

Adjustable nitrogen gas flow meter for Organomation N-EVAP Evaporators. 1/4 inch quick disconnect fitting in 1/4 inch swagelok fitting out

…Labconco construction and reliable performance are backed by a one year warranty. Using dry heat and nitrogen blow down, the NEW RapidVap Vertex Evaporator speeds evaporation of up to 50 samples at the same time. A convenient touch screen LCD allows easy programming of time and temperature.…

…of Organomation’s nitrogen evaporators Ease of use: Temperature and gas levels are easily set using the digital temperature controller and gas flow meter Versatility: Quickly converts to a 24 position MICROVAP or single position MICROVAP microplate evaporator using dry block and gas…

…applications. The RZ6 is an excellent choice for freeze dryers up to 6 liters, benchtop centrifugal concentrators or other low-temperature evaporations of high boiling point solvents, molecular distillations, schlenk lines and other applications where diaphragm pumps cannot provide sufficient…

…of Organomation’s nitrogen evaporators Ease of use: Temperature and gas levels are easily set using the digital temperature controller and gas flow meter Versatility: Quickly converts to a 15 position MICROVAP or single position MICROVAP microplate evaporator using dry block and gas…

…laboratory applications. The RZ9 is an excellent choice for freeze dryers up to 10 liters, centrifugal concentrators or other low-temperature evaporations of high boiling point solvents, molecular distillations, schlenk lines and other applications where diaphragm pumps cannot provide sufficient…

…in laboratory applications. The RZ2.5 is an excellent choice for small freeze dryers, small centrifugal concentrators or other low-temperature evaporations of high boiling point solvents, molecular distillations, and other applications where diaphragm pumps cannot provide sufficient vacuum. …

…mechanical vortex, heat and nitrogen blow down technologies Process eight samples up to 450 mL in size at once Vortexes up to 500 rpm. Heat warms samples from ambient to 70°C. The nitrogen blow down manifold is microprocessor controlled and directs the nitrogen flow into the selected sample…

RapidVap N2/48 Evaporation Systems use nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once. A stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow down reduces the partial…