Soxhlet Extractor

Compare Tool

Select up to 3 products

Soxhlet Extractor
1 - 32 of 33
Sort
View
Show
  • SER 148 Series Solvent Extractors

    VELP

    …or a group of elements from solid and semi-solid samples according to the Randall technique. Beats Ordinary Soxhlet Extractor Up to 5 times faster than traditional Soxhlet (hot solvent vs. cold solvent) Low solvent consumption (high solvent recovery, up to 75%) Limited cost per…

  • Extra Large Soxhlet Extraction Apparatus

    Wilmad LabGlass

    …bottom boiling flask (LG-7220-184 or LG-7220-188), a Soxhlet extraction tube (70mm or 100mm approx. I.D.) and an Allihn condenser. The extractor capacity is the solvent volume held in the extractor to the top of the siphon tube. The extractor has a standard taper outer joint at the top for…

  • KIMAX SOXHLET TYPE EXTRACTORS

    Kimble

    …Standard Taper Joints Complete with Allihn condenser with joint at bottom, Soxhlet extraction tube with top and bottom joint and flat-bottom flask Available in small, medium and large capacities Small Extractor with 125 mL flask (4406E10, E16, E22) Extraction chamber 30 mm i.d. x 95 mm…

  • Soxhlet Extraction Body

    Kimble

    Extractor body only, used as component part of 585050 Soxhlet extraction assemblies. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • PYREX® Extractors With Standard Taper Joints

    Corning

    … Takes 57 x 150 mm thimble Pyrex® Extractor With Allihn Condenser and Standard Taper Joints (4406K10, K16, K34, K40, K58, K64, K82 and K88) The following products are similar to those listed above. However, this apparatus consists of a Soxhlet extractor, an Allihn condenser and a flask, all…

  • EMEA Heating Mantles For Soxhlet Extraction

    Electrothermal (Bibby Scientific US)

    Incorporates a stirring module that allows the solution to be stirred and heated at the same time Three positions for 100, 250, 500 or 1,000 mL flasks Designed to maximize safety Separate heating controls for each position Temperature range to 450°C Stirring speed: 50 to…

  • Thomas Cellulose Extraction Thimbles

    Thomas®

    Wide selection of sizes Most Soxhlet extractor sizes Consistent wall thickness High-purity glass binderless microfiber Common Cellulose Thimble applications include fat determination of meat and dairy products, determination of PCB in fish products, determination of free fats in food products,…

  • PYREX Soxhlet Extractors

    Corning

    Includes an efficient Friedrichs condenser An efficient extraction apparatus for general purpose use Consists of an extractor, a special Friedrichs condenser and a flask, all equipped with Standard Taper joints Condenser tubulation o.d. is 10 mm for 3/8 inch i.d. tubing

  • Giant Extraction Apparatus, Soxhlet

    Ace Glass

    …with bulb type condenser and one flask. Cycling rates may be doubled over conventional style extractors. All joints are interchangeable. The 82" size is supplied with adapter for connecting the extractor and condenser. This is necessary because of the extremely large top joint on the extractor.

  • Soxhlet Extraction Apparatus

    Wilmad LabGlass

    …with flat bottom boiling flask, Soxhlet extractor and Allihn condenser. The extractor capacity shown is the solvent volume held in the extractor to the top of the siphon tube. The siphon tube is protected from accidental damage by the vapor tube. Extractor has a Standard Taper outer joint…

  • High-Purity Glass Extraction Thimbles

    GE Healthcare

    …and wall thicknesses to suit your application Designed to fit most commercially available Soxhlet extractors No binders are added Applications Smoke stack gas monitoring Soxhlet extraction Analyzing pesticide residues Determining oil/fat content of foods (e.g. French…

  • Micro Soxhlet Extraction Apparatus

    Wheaton

    …the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate When the liquid level in the extractor reaches the top of the bent tube, siphoning action returns the extract-enriched solvent to the flask Wetted parts are manufactured from either…

  • Extraction Apparatus, Soxhlet Improved Design

    Ace Glass

    The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.

  • PYREX Accelerated One-Step Extractor/Concentrator

    Corning

    Modular PYREX Accelerated One-Step extractor-concentrator performs extraction, concentration, and drying with the same apparatus and is designed for use with solvents of heavier specific gravity than sample being extracted.  Extraction and concentration can be done in 1/3 of the time.…

  • Modified Soxhlet Extraction Apparatus

    Wilmad LabGlass

    These large capacity Soxhlet extraction apparatus with modified design feature a wide mouth opening that provides easier charging and sample removal and a large area at the filter plate for rapid drainage of the solvent. Bulky solids may be placed directly on a fiberglass mat (not supplied) and fine…

  • Extractor, Soxhlet

    Ace Glass

    Soxhlet extactor body with standard taper outer joint at top and 24/40 standard taper inner joint at bottom.

  • Extractor, Soxhlet, with Stopcock

    Ace Glass

    Extractor body only, with stopcock for withdrawing samples from extraction chamber. Can be used interchangeably with the standard Soxhlet extraction apparatus.

  • Whatman High-Purity Glass Soxhlet Extraction Thimbles

    GE Healthcare

    …designed to fit most Soxhlet extraction units. They are well-suited to pollution monitoring when analysis of hot and acidic gases is required. Resistant to temperatures up to 500°C Binder-free, no chemical additives Designed to fit most commercially available Soxhlet extractors. Effective when…

  • 125 ml App, Soxhlet Extraction, Gnd

    Wheaton

    …containing the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate. When the liquid level in the extractor reaches the top of the bent tube, siphoning action returns the extract-enriched solvent to the flask. All wetted parts are manufactured from…

  • Whatman High Performance Cellulose Extraction Thimbles

    GE Healthcare

    …linter for high-performance use in automated Soxhlet extractor systems. Used in air and waste gas analysis. OtherWhatman extraction thimbles are available from GE Healthcare’s Life Sciences business. Cellulose thimble options for Soxhlet extractor systems Standard extraction thimbles have a…

  • SYNTHWARE Allihn Reflux Condensers

    Kemtech America

    Allihn Reflux Condenser with a water cooled inner drip tip at the bottom for Soxhlet Extractors. Joint Size: Available in 34/45, 45/50, and 55/50 Jacket Length: Available in 190, 260, and 300mm.

  • PYREX® Coarse Porosity Fritted Thimbles

    Corning

    These PYREX® coarse porosity fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880.

  • PYREX® 45mm Diameter Coarse Porosity Fritted Thimble, 130mm Long

    Corning

    …fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. These medium length thimbles are 130mm long. For PYREX® extractors and extraction apparatus, see Nos. 3740 through…

  • PYREX® Extra Coarse Porosity Fritted Thimbles

    Corning

    These PYREX® extra coarse porosity fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880. .

  • Standard Glass Microfiber Extraction Thimbles

    GE Healthcare

    603G Glass fiber thimble with inorganic binder Designed to fit most commercially available Soxhlet extractors No binders are added Available in a range of sizes and wall thicknesses to suit your application Thimbles of type 603G are made from borosilicate glass fibers with…

  • Cellulose Extraction Thimbles

    Ahlstrom

    …high purity cellulose extraction thimbles are most commonly used in Soxhlet extraction units for the separation of individual components from a mixture of solids and semisolids by solvent extraction. The use of a Soxhlet extractor provides a safe method of extraction with toxic or other noxious…

  • Glass Microfiber Extraction Thimbles

    Thomas®

    Wide selection of sizes Most Soxhlet extractor sizes Consistent wall thickness High-purity glass binderless microfiber Common Glass Microfiber Thimble material applications include gravimetric methods for hot environments, gravimetric methods for acidic gasses, and extraction…

  • Micro Soxhlet, Improved Design

    Ace Glass

    …chemical applications. Improved design permits greater condensing capacity. Condenser approximately 139mm jacket length. Joint between condenser and extractor is 24/25. Flask joint is 14/20. Designed to accommodate paper thimble, size 10 x 50 mm. Flask is 30mL capacity. Hose connections are size B.

  • Extraction Apparatus, Soxhlet, with Friedrichs Condenser

    Ace Glass

    Improved design of ACE extractor with Friedrichs Condenser in place of Allihn Condenser. Complete consists of flask cap, condenser, extractor, and flask.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.