The ³PrimeX delivers all the features of the ³Prime instrument but with an expanded sample capacity, accommodating 48 x 0.2ml microtubes, 30 x 0.5ml tubes plus half a 96 well plate in a horizontal format. Design flexibility allows the unit to be upgraded to included gradient cycling capability. …

Choice of linear or orbital shaking action Digital display and selection of temperature Low level water sensor Integral drain Range of accessories A water bath with integral shaking, a choice of platform is available to provide linear or orbital shaking action. The platforms…

Choice of six different tube holders to hold a variety of tubes. All tube holders can be quickly and easily removed and replaced without the need for tools. Once tube holder is in place tubes can be easily slotted into the holder where they will be securely held. Holders SB3/1, SB3/2 and SB3/3…

For use with Stuart® Rotator SB2 (1227Y94 ) & SB3 (1227Y95 ) Tube holder can be quickly and easily removed and replaced without the need for tools. Once tube holder is in place tubes can be easily slotted into the holder where they will be securely held. Quick and easy…

Choice of sizes: 6, 15 or 24 Litres Digital display and selection of temperature Low level water sensor Integral drain Supplied with robust polycarbonate lid Three robust and reliable water baths, each with easy to clean stainless steel tank and sturdy metal outer casing. …

A very versatile 20 litre hybridisation incubator and combined rocker shaker which only requires a minimum of bench space. The incubator temperature is accurately set via the easy to use encoder controls and displayed by a bright LED. Forced air circulation combined with microprocessor control…

These compact rockers are ideal where gentle mixing is required, either on the bench or in incubators. Choice of two models: Model SSM3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, staining and de-staining procedures etc. The angle of tilt can be moved to…

Two blocks with independent temperature control 130°C or 200°C maximum temperature Digital setting and display Uniform and stable temperatures Innovative design accommodating 2 blocks with independent temperature control allowing them to be set at different temperatures. The two…

6320D Visible Spectrophotometer supplied with power cord, pack of 100 disposable cuvettes, dual cell holder (for 10mm square cuvettes and 12.7mm diameter tubes), interface cable and PC application software on CD-ROM, 230V/50Hz.

Designed for stirring suspension cell cultures containing microcarriers Borosilicate glass Graduated Entire flask assembly can be autoclaved Suitable for conventional suspension cell cultures Produce improved cell yields over culture flasks which have suspended bar magnet.…

Removable, aluminum alloy insert blocks accept test tubes and microcentrifuge tubes. Can be used with 5891L02 through L12 heaters or 4367B25 sample concentrator. Block dimensions (W x D x H, mm): 95 x 76 x 51.

Lightweight stirrer Capable of stirring up to 1L Universal power adaptor Choice of designs With BioCote antimicrobial protection The SM5 mini stirrer from Stuart is a powerful magnetic stirrer, capable of stirring up to 1 litre, the stirring speed is adjustable up to…

All glass construction Two independent safety thermostats Safety reservoir full shut off Wall mountable Silica sheathed heaters All glass construction with silica sheathed heaters ensures top purity distillate at an economical price. Fitted with a control device to turn off the…

The EMEA60250/CEX1 Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…

Combined incubator shaker Digital display for temperature and speed Integrated timer Unique retractable platform for easy loading and unloading Angle adjustable accessory tube racks, with patent pending Magnalock coupling system available Coms enabled for external temperature…

Three independently controlled stirring/heating positions Separate "Hot" warning lights for each plate Powerful magnets for strong magnetic coupling A space saving and economical unit with 3 independent heating/stirring positions in a footprint only 600 x 270mm. Easily accommodates 3…

The EMEA60500/CE Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…

Fits Dri-Block® Heaters Range: 25° to 200°C (dependent upon heater) Fully adjustable gas reservoir to suit the levels of liquid in sample tubes Gas chamber can be removed and dri block used for routine incubation and temperature control As sample is heated, gas…

Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years. Now Techne® are proud to introduce the new, updated 2014 range offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of…

Combined incubator shaker 115 Litre capacity available Digital display for temperature and speed Integrated timer Unique retractable platform for easy loading and unloading Angle adjustable accessory tube racks, with Magnetic coupling system available Communications enabled for…

Micro-Kjeldahl Extraction equipment has been designed for Kjeldahl extraction on a micro scale to determine the protein content of food. These multibank units have 6 recesses in a stainless steel outer casing with back-mounted brackets (supplied with each unit), which can hold support rods of…

Valuable time can be taken up mixing bottles and flasks by hand. Let the SF1 take the strain. Holding up to eight flasks or bottles, up to 500ml capacity, it creates a vigorous mixing action by simulating hand shaking - especially useful for applications where prolonged shaking is required as it…

Suitable for Southern, Northern, Western and other blotting techniques Compact, easy to use Fast heat-up time Holds 3 large, 9 small or 12 mini-tubes Easy access to chamber Roller-Blot has been designed for busy molecular biology laboratories and is suitable for most…

Ideal shaking action for microtitre plates Combined Incubator shaker Optimised performance to minimize sample evaporation Digital display for temperature and speed Integrated timer Retractable platform for easy loading and unloading Also available with IQ/OQ documentation …

Hybridization Tubes with Sealing End Caps (7187D22 and D23) Of borosilicate glass, eliminating the need for a silanizing agent 7187D22 usable length 195 mm x 80 mm external diameter (73 mm internal diameter); 7187D23 usable length 195 mm x 44 mm external diameter (37 mm internal…

Temperature range 30° to 100°C At least five 20 x 20 cm filters can be probed in a single hybridization chamber in DNA experiments Holds up to a maximum of six hybridization tubes (maximum of five membranes per tube); includes three Hybridization Tubes (Thomas number 7187D22) …

Highly versatile - accepts a choice of 5 drums Built in timer Variable speed control 6 to 60rpm Rotation speed: 6 to 60rpm Dimensions (w x d x h): 650 x 250 x 250mm Net weight: 6.4kg Electrical Supply: 230V, 50Hz, 50W The STR4 rotator drive unit is used in conjunction with…

Choice of 130°C or 200°C maximum temperature Digital setting and display Uniform and stable temperatures Designed for the precise heating of test-tubes, micro centrifuge tubes and cuvettes and microtitre plates. The bright, easy to read LED display facilitates very easy setting of…

The stirrers are designed for optimal suspension cell culture and the use of microcarriers. The system comprises of a stirrer platform and a number of glass culture vessels. MCS-102L accommodates two 1 litre culture vessels Speed range from 0 to 80rpm Softstart/stop for slow…

The Prime Pro 48 real time PCR system is a new, high specification, economically priced real time thermal cycler from Techne. Made in the UK, the Prime Pro 48 features the highest thermal block uniformity and fastest run time of any block-based qPCR system on the market. High thermal…

These compact rockers are ideal where gentle mixing is required, either on the bench or in incubators. Choice of two models: Model SSM3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, staining and de-staining procedures etc. The angle of tilt can be moved to…