10 Ml Vial Rack
-
This 96-position sample/collection rack features wells designed for 8 mL to 13 mL vials. It's compatible with the ASX-260, ASX-280, ASX-520, ASX-520HS, ASX-560, EXR-8, XLR-8, XLR-860, and ASX-1600 and the APS-1650.
-
…vials (fits 6, 10, or 20 mL vials). Vials lock in rack for convenient one-handed cap removal. Openings in the bottom of each well facilitate drainage. Alphanumeric indexing on rack simplifies sample identification. Easy to clean and fully autoclavable.* Stackable—even with vials…
-
Polypropylene Vial Racks
DWK Life Sciences (Wheaton)…Chemically-resistant polypropylene rack can accommodate forty-eight 15-mm o.d. chromatography vials Autoclavable at 121°C for 20 minutes Vial grid alphanumerically indexed for easy sample identification; 4- x 12-well configuration. Dimensions: 3 3/4” x 10 5/8” x 1 1/8”; weight:…
-
Box Rack Storage Tanks
Horizon ScientificABS CryoMax System Vial Capacity: 750 (2ml) Total Box Capacity: 30 Rack Capacity: 6 Boxes per rack: 5 Vials per box: 25 Liquid Nitrogen Capacity: 47.4 liters Static Evaporation Rate: .39 liters/day Static Holding Time: 76 days Neck Diameter (mm): 127 Exterior Height…
-
Vials and Vial Sets for the 2000 Geno/Grinder®
SPEX SamplePrep…foam vial holder. Carrier fits Geno/Grinder clamp; used in pairs. Grinding load per vial 1.5 mL. Vials can also be used with 2662 Cryo-Block or 2190 Vial Rack. Case of 10 sets, each set containing 24 vials pre-loaded with steel balls. 2241-PC Polycarbonate Vial : 5 mL polycarbonate vial with…
-
…feet. The rack has two levels and exhibits wide spacing to provide prime sample access and visibility. Tube positions are numbered 1 to 20 for organizing samples (210 x 75 x 35 mm). Key Features Step design allows easy access to tubes 2 rows of 10 (20 x 1.5 to 2.0 mL total)
-
Cryobank And Bank-It Vials
Thermo Scientific Nunc…Datametric ECC200 open code allows for safe sample identification and reading of entire racks in one step. CryoTubes are CE-marked for diagnostic use and vials have a sterility assurance level of 10 6 . Vials conform to IATA requirements for transportation of diagnostic specimens, UN packaging…
-
CryoSure® Cryogenic Vials with Rim-Seal caps, Assembled, Sterile
Evergreen Scientific…and white. *Evergreen does not recommend the use of screwcap vials, including CryoSure® vials, for immersion in liquid nitrogen or other liquified gases. Immersion in liquid nitrogen may cause leakage in CryoSure® vials and also presents the potential danger of rapid pressure buildup…
-
Automatic Liquid Sampler Supplies
Agilent TechnologiesBasic Supply Kit (2713N15) contains 10 ml syringes (6/ea), 23/26 gauge needles, 4 ml vials with diffusion caps (144/pk), 2 ml automatic sampler vials with screw caps (1,000/pk), GC septa (25/pk), and vial racks (5/pk).Basic Supply Kit Contains 10 ml syringes Agilent Technologies products are…
-
CryoSure® Cryogenic Vials, No Caps, Non-Sterile
Evergreen Scientific…and white. *Evergreen does not recommend the use of screwcap vials, including CryoSure® vials, for immersion in liquid nitrogen or other liquified gases. Immersion in liquid nitrogen may cause leakage in CryoSure® vials and also presents the potential danger of rapid pressure buildup…
-
Auto JR
Horizon Scientific… - (6) 10-2 Racks - (1) Pair CryoGloves - (1) LN2 Measuring Ruler ABS Auto Jr. with Polycarbonate Package System Total Vial Capacity (2 mL vials): 6000 Total Box Capacity: 60 Rack Capacity: 6 Boxes per rack: 10 Vial per box (2 mL): 81/100 LN2…
-
Screw Neck Headspace vials, N 18
MACHEREY-NAGELMACHEREY-NAGEL Headspace screw neck vials N 18 are made from 1st hydrolytic class glass More convenient, consistent and safer sealing process compared to crimping (better reproducibility) 10 mL (clear) and 20 mL vials available (clear/amber) Compatible with CTC, Gerstel, Shimadzu and…
-
The UniRack™ Jr
Simport…polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml made by manufacturers such as Simport®, Sarstedt, Nalgene, Bio-Plas, SSI, Sorenson etc... as well as 1 to 5 ml cryogenic vials. Flip the…
-
…takes 1/4″ vacuum tubing. PP collection vessel rack accommodates autosampler vials; small scintillation vials (22.75 mm O.D. recommended); 10 and 16 mm test tubes; and 1, 2, 5, and 10 mL volumetric flasks. An optional plate for 20 mL scintillation vials is available for 12-port models.
-
Visiprep™ SPE Vacuum Manifold, Standard, 24-Port Model
MilliporeSigma…takes 1/4″ vacuum tubing. PP collection vessel rack accommodates autosampler vials; small scintillation vials (22.75 mm O.D. recommended); 10 and 16 mm test tubes; and 1, 2, 5, and 10 mL volumetric flasks. An optional plate for 20 mL scintillation vials is available for 12-port models.
-
The UniRack™
Simport…or polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml made by manufacturers such as Simport, Sarstedt, Nalgene, Bio-Plas, SSI, Sorenson etc... as well as 1 to 5 ml cryogenic vials. Flip the UniRackTM…
-
Auto Max Systems
Horizon Scientific…Mini Tower Racks (25 cell mini boxes) - (221) 81 or 100 cell polycarbonate boxes - (78) 25 cell mini polycarbonate boxes - (1) LN2 Measuring Ruler - (1) Pair CryoGloves ABS Auto Max System Auto Fill Tank Total Vial Capacity (2 mL vials): 24,050 …
-
Vapor Shippers
Horizon Scientific… Total Vial Capacity (6/Cane): 500 Number of Racks: 1 Boxes per Rack: 5 Total Bag Capacity (250 mL): 10 Liquid Nitrogen Capacity: 8.5 Liters Static Evaporation Rate (Liters/day): 0.85 Static Holding Time (days): 10 Neck Diameter…
-
BioReaction
Chemglass…The rack allows the tubes to be placed at an optimum angle (up to 30°) for both oxygenation and finding the correct fluid motion, eliminating the need for excess agitation. The silicone insert secures the tubes in the rack and prevents damage to the tubes and rotational slippage.The rack is…
-
…sterilization. Economical solution for identifying vials, tubes, racks and flasks. Adheres to stainless steel, glass and polypropylene. Withstands temperatures from -320.8 to 249.8° F (-196 to 121°C ). Labels are designed to fit 1.8 mL-10 mL test tubes. A ribbon is required to print this material.…
