Rack Bottle

Compare Tool

Select up to 3 products

Rack Bottle
1 - 32 of 73
Sort
View
Show

  • Steel Bottle Carriers

    Globe Scientific

    Produced from polyamide coated steel Offers better heat and chemical resistance than other coatings Ideal for safely carrying up to six bottles or wash bottles

  • Bottle Holders

    TrippNT

    Stabilize and store squeeze bottles Provide convenient access to solvent wash bottles Hold one, two or three 8 oz. or 16 oz. bottles up to 3" in diameter Durable Kydex ® units keep top-heavy bottles from falling over to prevent spills. The superior chemical resistance…

  • Scienceware® No-Wire™ Bottle & Vial Racks

    Bel-Art Products

    Small enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable

  • Scienceware® Standards Bottle Rack

    Bel-Art Products

    Arranges valuable USP™ reference standards Rack fits into Secador® Desiccator for low humidity storage Clear acrylic construction for easy viewing of labels Wipes clean Stores thirty 23mm standards bottles in a compact footprint, 33 x 11 x 2.2 cm high.

  • 4-In-1 EZ Tote Bottle Carrier

    Thermo Scientific Nalgene

    …500 ml, 1L or 4L bottles Strong, durable and lightweight plastic With a capacity of 28 pounds, this folding tote is perfect for safely and easily carrying bottles or other lab essentials. Tote carries (8) 500 ml bottles, (6) 1L bottles or (2) 4L bottles. Durable plastic construction…

  • Aluminum Microbiological Basket/Carrier

    Blacks Machine Co.

    These aluminum baskets offer the same rigid construction as the A300 series, but are designed for use with short bottles and containers. The low height, 2.5", allows for smaller vessels. Products are manufactured in the USA Custom sizes are available on a quoted basis

  • Scienceware® 250mL Centrifuge Bottle Rack

    Bel-Art Products

    …steel wire, holds six bottles in 60 mm square grids on two levels Bottom level has rails to hold the tip of the conical bottom of the bottles Dimensions are 8-3/8” x 5-1/2” x 4” (20.8 x 13.5 x 10.2 cm H) Perfect for conical and round bottom bottles that can't stand up by…

  • Scienceware® Poxygrid® B.O.D. Bottle Rack

    Bel-Art Products

    These racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)

  • Polyethylene Safety Type Bottle Compartment Carrier

    Dynalon

    Safe and convenient method of carrying bottles Carrying handle 1” in diameter 1784M50 is non-compartmentalized; overall dimensions: 14” x 6 7/8” x 6”. 1784M52 has six compartments measuring 4 1/2” x 3 3/8” x 6” each. 1784M54 has two compartments…

  • Scienceware® BOD Bottle Carrier

    Bel-Art Products

    Autoclavable Overall dimensions 13-1/8” x 6-3/4” x 2-5/8” Opening 2.8" diameter Polypropylene carrier has eight wells for 300 mL bottles, bottles not included.

  • Scienceware® Polyethylene Test Tube Racks

    Bel-Art Products

    Cylindrical wells for tubes, vials, bottles, centrifuge shields, etc. Stable, one-piece construction Versatile racks offer wells and drying pins

  • Plastic Drying/Draining Rack

    United Scientific Supplies

    Plastic draining rack excellent for drying tubes and bottles. The back plate has 20 holes into which pegs are tightened. Bottom features a wastewater tray and drain

  • Genie Shaker Accessories

    Scientific Industries

    …Multi-MicroPlate Genie is lower than M4K-1390 you will also need to purchase Part No. 0K-4000-900 Shock Absorbing Feet 4 pk. Multi-Tube Rack Tube Rack to hold up to 12 tubes for the Multi Vortex-Genie. Accomodates tubes of any material type, up to 29mm diameter. Non-Slip Mat for…

  • Hybridization Oven Accessories

    Labnet

    … Heavy-walled glass construction Teflon ® seal Hybridization bottles, mesh and bottle rack are compatible with all standard hybridization ovens (Hybaid, Boekel, UVP, etc.). The bottles’ heavy-walled, borosilicate glass construction blocks most beta radiation. They are…

  • Poxygrid® Hybridization Bottle Racks

    Bel-Art Products

    Protects and Stores Hybridizing Bottles Heavy-duty rack protects your expensive bottles keeping them from rolling, tipping and striking against one another. Holds 150mm and 300mm long bottles with ample space in between to allow for the screw cap diameter and provide convenient handling. …

  • Polycarbonate Rack

    Thermo Scientific Nalgene

    Holds up to eight 250-500 mL bottles (bottles not included) Bottles held securely by bottom pan depression and upper grid Telescoping handle stays out of the way for convenient storage Rack will not tip over Autoclavable

  • Scienceware® Dispensing Jug Rack

    Bel-Art Products

    Space-Saving Storage for Jugs, Jerricans and Bottles This rugged, corrosion-resistant polyethylene rack has 5 shelves and is ideal for stacking four dispensing jugs (H11850) with a bottom shelf to hold a spare jug or other equipment. Each shelf is 26cm (10-1/4") high Shipped…

  • Low Density Polyethylene Safety Type Bottle Carriers With Handle

    Thermo Scientific Nalgene

    Nalge 6501 For transport and storage of glass reagent bottle, 5-pint and 1-gallon capacity Neck and bottle cap are protected Clear polycarbonate lid allows for identification of bottle contents No need to remove bottle from carrier before pouring, Top twists off for removal from…

  • Hybridization Bottle Storage Rack

    Wheaton

    Works with 35mm ID hybridization bottles Ideal for transportation and storage Acrylic construction holds up to 6 bottles

  • Drawer Freezer Racks for Storage Bottles

    Crystal Technologies

    Thomas No. 1200C38, 1200C39 and 1200C40 Rack with 1 Drawer for Bottles Thomas No. 1200C41, 1200C42 and 1200C43 Rack with 2 Drawer for Bottles

  • Accessories: Clamps & Test Tube Racks

    New Brunswick Scientific

    Eppendorf™ Sticky Tape is an alternative to flask clamps for securing vessels to a shaker platform. Ideal for bottles and dishes or containers that cannot be held with conventional flask clamps Tape can be used at speeds of up to 200 to 300 rpm depending on flask size, orbit…

  • RACK’N’LAB Sampling Bag Racks

    Labplas

    …industries. Its innovative design allows multiple bags to be used whilst being held upright without the need for bottles or specifically designed bags. This light weight and versatile rack takes up very little storage space when stored in its flat form and is available in two different sizes. …

  • Scienceware® Battery Powered Engraving Tool

    Bel-Art Products

    Permanently engraves in seconds Engrave test tubes, bottles, racks, keys, equipment, tools, electronics and more. Simply hold the Engraving Tool like a pen, press the power button, apply light pressure, and ‘write,’ to permanently mark most materials including glass, plastic,…

  • BOD Bottle Accessories

    Wheaton

    BOD Bottle Racks are constructed of coated wire. 1215X63 is holds up to twenty 60 mL BOD Bottles and 1220C96 hold up to twelve 300 mL BOD Bottles. Rubber Leash For BOD Stopper (1234R64) ensures that the stoppers do not become lost when collecting samples in from the field. The 10 mm diameter…

  • Centrifuge Bottle Rack

    Heathrow

    For large volume centrifuge bottles Epoxy-coated steel wire rack is ideal for conical-bottom centrifuge bottles that can not stand by themselves. Bottom rails hold bottles securely upright. Accommodates round-bottom tubes as well. Holds up to 60 mm diameter bottles (250 mL max.). Autoclavable.…

  • Scienceware® Lab-Aire® II Drying Racks

    Bel-Art Products

    …Scienceware® Lab-Aire® II Drying Racks a practical solution for drying and storing labware. All models come with three size and length rugged V-channel pegs that can be moved and repositioned to hold a variety of labware, including beakers, flasks, bottles, test tubes and cylinders.…

  • Thomas Accessories For Large Analog & Digital Orbital Shakers

    Thomas®

    … Media bottle clamps feature stainless steel construction and have a flat head screw for platform attachment. Test tube racks also feature stainless steel construction and are supplied with hardware for attachment to platforms. The 10-14 mm rack (1231B12) holds 48 tubes, the 16-20 mm rack (1231B13)…

  • High Density Polyethylene Safety Tray

    Thermo Scientific Nalgene

    …for accommodating 100 mL, 250 mL and 500 mL bottles; remove inserts to accommodate bottles and unwire test tube racks With molded-in handle For safely handling up to six 1 Liter glass or plastic bottles. Overall dimensions 15” x 14” x 10 1/2”. Bottles not included.

  • Safety Bottle Carriers

    Thermo Scientific Nalgene

    bottles securely in place. For handling up to six 500-mL or 1-pint glass or plastic bottles (bottles not included). Unique carrier easily and safely holds up to six standard half-liter reagent bottles in any profile. Also useful for carrying most other half-liter glass or plastic bottles. Bottles

  • Rack, Holds Twelve 300 mL BOD Bottles

    Wheaton

    Number of bottles per rack: 12 Bottle capacity: 300mL Corrosion-resistant Rack is manufactured from rugged PVC coated wire Racks interlock for connecting stacked racks (allows safe transport in stacked position)

  • PolarSafe™ Stainless Steel Bin Storage Racks

    Argos Technologies

    Racks have been designed to store miscellaneous bottles, tubes, vials, bags or boxes that will not fit in standard storage racks. Both rack sides are made from wire mesh to allow for easy viewing of contents. The bin storage racks are available in fixed or drawer rack styles. The drawer racks are…

  • BOTTLE RACK HOLD (6) 35MM

    Thermo Scientific

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.