Ice Pack

…attach, on or next to an ice machine.1 STAY-DRY* Hanging Dispenser System Place STAY-DRY* dispenser bracket on or near ice machine Secure STAY-DRY* box to bracket using tabs Rip open dispenser box door along perforations and discard Remove STAY-DRY* Ice Packs Repeat process as…

…and clinical performance. All of our cold packs – General, Specialty and Instant – require minimal setup time and materials, with virtually no cleanup compared to ice-filled gloves, plastic bags and other “makeshift” ice bags. None of our cold packs are manufactured with natural rubber latex…

11 in. x 21 in., 2 straps, Large replacement bladders fit the JUMBO-PLUS* Ice Pack

3-layer STAY-DRY* construction, Soft outer cover, Minimizes condensation, Consistent cold therapy, Minimizes leaking, Flexible closure shaped to the perineal area

Eyecare EENT Ice Pack for plastic surgery, ophthalmic and sinus procedures, 4.5 in. x 10 in.

…perishable products at a constant and desirable temperature. ICE-BRIX® was rated “Best in all aspects”. ICE-BRIX® is the ultimate in refrigerant cold packs. Their unique features include: Long lasting cold Efficient transfer of energy Leakproof Reusable

…degree of temperature stability. Suitable for use with screw cap or snap cap microtubes from 0.5mL to 1.5/2.0mL Supplied 6 boxes per pack. Designed for crushed Ice Polypropylene, -80°C to 135°C Detachable “lift-off” lids Economical For screw cap and snap cap tubes

Extra attention to seams helps minimize breakage due to sharp ice crystals. The dispenser is constructed of 5/16" stainless steel. Table top or wall mount.

Boxes for storage and shipment For short-term storage of ice, dry ice, liquid nitrogen, frozen samples, etc., as well as for shipment of materials requiring dry-ice packing Efficient insulation provided by expanded polystyrene walls, encased in sturdy fiberboard shell with close-fitting…

…Dry ice is the Ideal cooling agent for packed medical goods such as pharmaceuticals, diagnostic specimens and biological substances. Dry ice is colder than typical ice water and will not leave a residue. DI800 is machined from solid aluminum, will not rust or have chipped paint and the ice…

…state on thawing Phase changes at 0°C (+32°F) Standard An economical alternative to wet ice enclosed in durable 4.1 mil polyethylene film. PolarPack gel packs provide reliable refrigeration for safe transport of pharmaceuticals and other medical products. Foam Brick …

Polar Pack® refrigerants provide thermal solutions for shipping temperature critical packages during transit. Designed to provide reliable temperature protection for a vast array of products and packages Ideal for products requiring frozen temperatures or extreme cold that may not…

Polar Pack® refrigerants and Utek® phase change materials provide thermal solutions for shipping temperature critical packages during transit. Available in a broad selection of styles and a multitude of sizes, they’re designed to provide reliable temperature protection for a vast array…

…and clinical performance. All of our cold packs-; General, Specialty and Instant; require minimal setup time and materials, with virtually no cleanup compared to ice-filled gloves, plastic bags and other & makeshift; ice bags. None of our cold packs are manufactured with natural rubber latex…

Polar Tech's Grab & Go gel packs were designed for those customers who are more price conscious, with a budget already established. These ice packs were designed as a single use option and are not considered leakproof, like our Ice Brix brand. Grab & Go still offers reliable temperature…

The 500 series Koolit® gel packs feature a puncture resistant nylon laminate film. The 0°C (32°F) ice gel formulation is ideal for the shipment of refrigerated products. Saddlebags (SB) are designed to wrap around the uneven contour of the payload.

The 600 series Koolit gel packs are high quality and economical. They feature a long-lasting, non-toxic polymer ice gel encased in a thick 5-mil white polyethylene pouch for dependability. The 0°C (32°F) gel formulation is ideal for the shipment of refrigerated products.

Small packets of refrigerant sealed between layers of plastic film Provides one-third greater thermal efficiency than regular ice Reusable packs come in singles or as a mat Remains flexible even when frozen Mats are 10.4 m (34 ft) long and 406 mm (16”) wide and can be cut to desired size.…

Internal Dimensions (l x w x h) : 10-5/8 x 8-5/8 x 3-1/2 in ch 3/8 inch (1cm) holes Designed for the storage of vials or microcentrifuge tubes in cold temperatures Back of box slides open to allow for insertion of gel ice packs Specifically designed for safe storage

…in narrow corridors, aisles and tight working areas. Use as a dry ice, wet ice or cold pack storage transport. Convenient for dispensing dry ice or wet ice. Ideal for dispensing dry ice or cold packs in a shipping and packing department Perfect for shipping or movement of biological materials,…

RE-FREEZ-R-BRIX™ is a block of rigid foam that holds its shape frozen or thawed and is reusable. Non-toxic, reusable, sealed in a heavy plastic pouch, maintains shape. Prevents thawing – Keeps frozen products chilled for an extended period of time. Protects against freezing – When…

…with white box and cold packs in a convenient starter kit. Safely accommodates small bottles, samples or mail order shipments. Light weight, durable, excellent insulating properties. Reusable and recyclable IB 8 ICE BRIX cold packs are bulk packed (COLD PACKS ARE NOT PACKED INTO THE COOLERS).

…interchangeable pestles and tubes Clearance between pestle and tube 0.1 - 0.15 mm Designed for hand operation, but can be slow-speed motor driven by inserting a rubber stopper and metal rod into pestle Hollow handle permits packing with ice Expanded reservoir and pouring lip

…of most refrigerated or frozen materials, including pharmaceuticals, laboratory specimens, serums and vaccines, human organs, culture packs, and nuclear and isotope materials Excellent dry ice sublimation… average dry ice usage in 1 ½ inch thick wall units is 3 pounds in 24 hours

…air pressure testing on all Level A fully encapsulating suits Completely self contained Cool-Guard® Vest Includes one set of 4 phase change packs Washable Vest Packets can be easily recharged in ice water Patented phase change material stays cool for several hours

The IsoTherm-System, which consists of an IsoRack (work rack), IsoSafe (insulating box), and two IsoPacks (cool packs), specializes in cooling samples effectively and consistently at –21°C or 0°C over many hours. The IsoTherm-System can be used to prevent enzymes from becoming inactive…

…variable height sizing requirements. Simply add a lid to a lid or a lid to a base or a base to a base. Always allow room for your refrigerant packs or dry ice to help ensure your perishable product’s integrity upon arrival. Most carriers require the insulated shippers to be in an outer…

…room temperature product. Our durable insulated containers are also ideal for temporary storage in the warehouse, on the pack out line, and for the storage refrigerants and dry ice. Ranging in various sizes and styles, these durable insulated containers make storing, transporting, and unloading…

…Each thermometer is individually factory calibrated. Automatic field calibration is easily performed. Simply place the probe in a container packed with ice, fill with water, then press the "CAL" button—meter automatically recognizes the freezing point. Large easy-to-read screen with back…

… Each thermometer is individually factory calibrated. Automatic field calibration is easily performed. Simply place the probe in a container packed with ice, fill with water, then press the "CAL" button—meter automatically recognizes the freezing point. Large easy-to-read screen with back…

…sized product storage Fill with ice and use as a temporary low temperature workstation - ideal for teaching labs or those with limited bench space Clear lid, translucent sides and autoclavable Measures 4.9 x 4.9 x 5 in (12.5 x 12.5 x 12.9 cm) Pack of 5 Color: Purple Autoclavable

…into the front edge and the top surface. Available in a rainbow pack of five colors with clear lids and bases, the actual tube rack (colored middle layer) can be snapped out, allowing the base to be easily filled with crushed ice or liquid. The BetterBox is made of autoclavable virgin polypropylene…