Ice Racks

Ice Rack™ - detachable lid, tube platform, and base, numbered cavities, 6/cs 72 × 0.5mL tubes accepts snap cap and screw cap 0.5mL to 0.65mL tubes 72 × 1.5mL tubes accepts snap cap and screw cap 1.5mL to 2.0mL tubes 100 × 1.5mL tubes accepts snap cap and screw cap…

These new tube boxes have a removable white tube tray that can be kept filled with crushed ice or other temperature controlling materials. They also have a translucent cover. Temperature sensitive samples and assays in microtubes can be processed with an extra degree of temperature stability.…

Lower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…

…the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000mL beaker. Special blend of autoclavable polypropylene is heavier than water so rack remains stable at the bottom of water baths or ice baths All racks have a…

Offering a variety of racks to safely store samples in your freezer Top inset tray secures tubes in place. Fill lower section with water or crushed ice to chill sample tubes quickly. . Molded polystyrene racks stack neatly to save benchtop space.

Floating microtube racks are ideal for thawing, cooling, or incubating samples in water or ice baths at a wide range of temperatures from -70C to 100C.  Tubes are supported below the lip while conical ends are immersed in water.  Racks feature a handle for easy removal from water bath as…

…storage system. For 1.5mL and 2.0mL tubes. These racks fit into Labcon pipet tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can in corpo rate dry ice for use with frozen samples on the bench. …

ChillBlock™ thermo-conductive metal alloy tube racks eliminate inconsistencies which occur due to inserting tubes directly into ice, dry ice, alcohol ba ths, water baths and other common laboratory temperature sources. Place the ChillBlock™ tube rack directly onto a temperature source and it will…

…thermo-conductive metal alloy tube racks eliminate inconsistencies which occur due to inserting tubes directly into ice, dry ice, alcohol ba ths, water baths and other common laboratory temperature sources. Place the ChillBlock™ tube rack directly onto a temperature source and…

…x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x 9 1226C37: holds tubes: 1.5 mL micro, places: 42, rows: 6 x 7

…and other tools configured for drug discovery and robotic applications. Flow-through design allows rapid temperature changes of samples when transferring between ice bath and heated water bath Rigid wire construction with blue epoxy finish Steam autoclavable at 121°C (250°F)

…thermo-conductive metal alloy tube racks eliminate inconsistencies which occur due to inserting tubes directly into ice, dry ice, alcohol ba ths, water baths and other common laboratory temperature sources. Place the ChillBlock™ tube rack directly onto a temperature source and…

…microcentrifuge tubes in numbered locations Raised handle for easy lifting without agitating samples Stable feet keep racks upright on the bench Use in water baths, ice or on the benchtop 95mm outer diameter fits most 1000ml beakers Optional vortexing attachment allows samples to be…

…cryogenic processes Autoclavable Self-locking design Rack and tray are made of autoclavable polycarbonate and are designed for use with most vials. The removable storage tray can be used to hold crushed ice or water. Two styles are available for 30 or 50 vials. Both feature a…

…aluminum, stainless steel, powder coated metal, painted metal, iron and more. They can be applied on the top and sides of freezer racks to easily identify racks and their content without pulling them out from Dewars. Our MetaliTAG™ are available in multiple dimensions and colors, and…

…microcentrifuge tubes in numbered locations Raised handle for easy lifting without agitating samples Stable feet keep racks upright on the bench Use in water baths, ice or on the benchtop 95mm outer diameter fits most 1000ml beakers Also available without vortexing attachment and in 3 other…

…the rack below the lip. Square or round racks have molded-in letters and numbers at each hole for easy sample identification. Square- and round-style racks for incubating 0.5 to 2.0mL microcentrifuge tubes at elevated or reduced temperatures in water or ice baths Round-style racks fit…

…to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and temperatures up to 121°C for a variety of lab procedures. 15mL conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required. Organize and store samples with…

…safely on the lab-bench without sample degradation due to temperature increase of fluctuation.  Unlike traditional ice buckets, these blocks do not require any ice and are uniquely designed to minimize condensation, resulting in a convenient, mess-free cooling. Each DryChill Cooling…

…to authorized access of a defined user group. Freezer Racks and Boxes Side Access Racks made of stainless steel or aluminum for 50 mm (2") boxes, for 5x4 or 6x4 boxes, empty or filled with standard boxes Sliding Drawer Racks made of stainless steel, for 50 mm (2") boxes, for 5x4 or 6x4…

…carrier accommodates 500 mL and 1,000 mL bottles. Made from a unique, high performance, thermoplastic elastomer. Handle is molded as part of the carrier to assure uniform appearance and quality. Carries liquids and ice without sweating. Resists bacteria and fungi growth. Available in three colors.

…Slants 6mL 1 Pipet, Sterile, Disposable 1 pkg Cotton Swabs, Sterile Materials Needed but not Supplied: Large beaker Hot plate or waterbath Microwave (not necessary if melting agar in a waterbath) Markers Microfuge tube racks Container of ice Recommended: Incubator (37°C) DOT Info: Non-regulated

…1.5ml/2ml, 15ml, 16ml, 19ml, and 50ml tubes through its unique carousel rack design. Our Cooling Carousel Tube Rack provides the capability to keep sample tubes within ice, ice-water, or cold beads. Additional carousel racks can be purchased for quicker load time. Up to 20 samples can be…

Microtiter format rack and tube system Resistant to most research chemicals Autoclavable up to 100 times Can be stored in temperatures as low as -80°C Holds tubes in an 8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are…

For use as Stand-alone units or with Ice Pans *not compatible with CoolSafe

The IsoTherm-System, which consists of an IsoRack (work rack), IsoSafe (insulating box), and two IsoPacks (cool packs), specializes in cooling samples effectively and consistently at –21°C or 0°C over many hours. The IsoTherm-System can be used to prevent enzymes from becoming inactive…

Low-cost choice with excellent low-temperature storage properties Fill lower section with water or crushed ice to chill sample tubes quickly. Top inset tray secures tubes in place. Molded polystyrene racks stack neatly to save benchtop space.

…top surface. Available in a rainbow pack of five colors with clear lids and bases, the actual tube rack (colored middle layer) can be snapped out, allowing the base to be easily filled with crushed ice or liquid. The BetterBox is made of autoclavable virgin polypropylene and is freezable to -80°…

…Across the Block Can be Used with Dry Ice or CLS-2991 Lab Armor Beads Rack can be Placed on Hot Plate for Heating Solid aluminum metal chamber for micro centrifuge tubes. Ideal way to keep micro centrifuge tubes cold by placing in an ice bucket. Or heat samples by placing on hot…

…liquid temperature sources such as water, melting ice and liquid nitrogen. The 2-inch height makes it ideal for use in a rectangular ice pan with ice. Samples stay <4°C for over 10 hours with one pan of ice, while kept away from the melting ice water. Dimensions ( L x W x H): 27.9 x 14.0…

Convenient alternatives to ice buckets, incubators, water baths and freezers Potential sources for cross contamination and numerous trips to large storage equipment are eliminated “Press-to-set” microprocessor temperature control (except 5152M45) is simple and reliable Dimensions: 9 3/4" D…