Vial Rack

Compare Tool

Select up to 3 products

Vial Rack
1 - 32 of 317
Sort
View
Show
  • Vial racks

    MACHEREY-NAGEL

    Vial racks and containers allow a secure transportation of sample vials from lab to lab Safe standing position of the vials on the lab bench in dividers/cavities designed for the respective diameter Racks and containers available for a broad variety for different vial diameters, almost all…

  • Vial Racks

    Agilent Technologies

    This product is only available to U.S. Domestic Customers.

  • 50 Position Vial Rack

    DWK Life Sciences (Wheaton)

    50 Position rack 12.5 mm Open ID sized vials Racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the vials are in place. Each well has an opening in the bottom to facilitate drainage.…

  • 50 Position Vial Rack

    MicroLiter

    MicroLiter offers products for both LC and GC applications.

  • CryoELITE Benchmate Vial Rack

    DWK Life Sciences (Wheaton)

    For use with both freestanding and round bottom vials One hand cap removal of freestanding vials Holds 50 cryogenic vials Manufactured from polypropylene Easily cleaned in an automatic washer or autoclavable at 121°C for 20 minutes Non-skid feet offer additional stability for bench work …

  • Vial Rack for Headspace Vials

    Restek

    vials (fits 6, 10, or 20 mL vials). Vials lock in rack for convenient one-handed cap removal. Openings in the bottom of each well facilitate drainage. Alphanumeric indexing on rack simplifies sample identification. Easy to clean and fully autoclavable.* Stackable—even with vials

  • Multi-Use Universal Vial Rack™ System

    J.G. Finneran

    Increased spacing allows the user to pipet samples or attach caps without removing the vials from the rack. Available 5 per case.

  • Polypropylene Vial Racks

    DWK Life Sciences (Wheaton)

    Vial Rack Similar to 9720E10 Takes 90 vials up to 17 mm o.d. or 16 mm culture tubes No inserts required Overall dimensions: 170 x 320 x 30 mm high Chemically-resistant polypropylene rack can accommodate forty-eight 15-mm o.d. chromatography vials Autoclavable at 121°C for 20 minutes Vial

  • 2.0mL Sample Vial Racks

    Restek

    Racks feature alphanumeric indexing for easier vial identification. Racks can be stacked for efficient storage. Fits most 2.0 mL, 12 x 32 mm vials (vials sold separately).

  • TruCool® Cryogenic Vial Racks

    BioCision

    Cryogenic vial locking racks feature a locking mechanism that allow one-hand opening for self-standing cryogenic vials. Accommodates both round bottom and self-standing vial formats. Racks have A - J and 1 - 5 row and column indexing for easy organization. Autoclavable. 5 per pack.

  • ChillBlock™ Cryogenic Vial Racks

    Simport

    rack directly onto a temperature source and it will rapidly adapt to that temperature from -150°C to >+100°C. ChillBlock™ tube racks ensure +/- 0.1°C temperature uniformity of all tubes when cooling, freezing or heating. ChillBlock™ Cryogenic Vial Racks are specially designed for Cryogenic vials

  • Serum Vial Racks

    Bel-Art Products

    …41mm (1 5/8"). Chemical resistant and steam autoclavable at 121º C (250º F). Sized for serum vials (10-13mm diameter), RIA vials and T3/T4 reaction vials (13-16 & 16-20mm diameter). Polypropylene racks fit most water baths for elevated temperature incubations End plates have hand holes for…

  • Vial Rack, Scintillation

    Dynalon

    Product Dimensions (l x w x h) : 15.187x14.437x2.5in Scintillation Vial Rack PP. Welded polypropylene rack holds 100 standard 20 ml. scintillation vials. Rack is autoclavable and resists both nitric and hydrochloric acids. Hole diameter: 1 1/16".

  • Vial Racks, PP

    United Scientific Supplies

    Sturdy, economical, and convenient racks for samples stored in vials. Autoclavabale at 120°C for 20 minutes. Can be stacked when not filled, for easy storage. Each well features a drainage hole at the bottom.

  • VIAL RACK, PP, 48-Position

    DWK Life Sciences (Wheaton)

  • Vial Racks for 2mL and 4mL Vials

    National Scientific

    Polystyrene racks can be stacked empty or with any number of vials inserted Polypropylene racks can be stacked empty or with a full tray of vials Polypropylene rack is durable; can be washed and reused multiple times All racks feature alphanumeric indexing for easy location of samples …

  • Scienceware® 24 Position Scintillation Vial Rack

    Bel-Art Products

    24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".

  • Cryogenic Vial Racks And Storage Boxes

    Corning

    Rack and tray are made of autoclavable polycarbonate and are designed for use with most vials. The removable storage tray can be used to hold crushed ice or water. Two styles are available for 30 or 50 vials. Both feature a self-locking design, allowing one-handed manipulation of vials. Storage…

  • Scienceware® No-Wire™ Bottle & Vial Racks

    Bel-Art Products

    Small enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable

  • COD Reagent Vial Cooling Rack

    Hach

    Stainless steel rack for holding hot COD vials or test tubes prior to reading. Fit Hach COD vials and Test 'N Tube vials. Vials not inlcuded.

  • 50-Vial Capacity 11 mm Vial Holder Rack 1

    PerkinElmer

    Vial Holder Racks for your 20 mm Vials and 11 mm Vials, great for holding vials while loading samples.

  • 36-Vial Capacity 20 mm Vial Holder Rack 1

    PerkinElmer

    Keep your samples organized and tip proof! These rugged, plastic vial racks are great for holding vials while you load and cap your samples. They stack away neatly when done.

  • CryoStor Vials, Anodized alum. rack w/24 serrated holes to lock vials

    NxTBIO Technologies

    Temperature range -190°to +121°C (vapor phase) Syringe permeable cap and molded graduations Constructed of LN2 grade polypropylene to withstand temperature extremes. Caps (white) supplied with integral O-ring to maintain seal integrity. Autoclavable.

  • ESI Rack for 1 mL 2 mL vials

    PerkinElmer

    Diameter: 14 mm

  • 90 Position Round Hole Autosampler Sample Rack, 8 mL Vials

    PerkinElmer

    This 90-position autosampler sample rack features round holes, 13.3 mm in diameter, designed for 8 mL round-bottom and 7 mL flat-bottom vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as…

  • 60 Position Square Hole Autosampler Sample Rack, 15 mL Vials

    PerkinElmer

    This 60-position autosampler sample rack features square holes, with side length of 17.0 mm, designed for 14 mL and 15 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as…

  • 50 Position Polypropylene Stackable Racks

    J.G. Finneran

    Finneran Stackable Vial Rack for 12x32mm vials 50 position rack is 5 wells deep by 10 well wide Use with 12x32mm vials and tubes Alphanumeric indexing Autoclavable Easy to clean

  • 90 Position Square Hole Autosampler Sample Rack, 8 mL Vials

    PerkinElmer

    …90-position autosampler sample rack features square holes, with side length of 13.5 mm, designed for 8 mL round-bottom and 7 mL flat-bottom vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling…

  • 24 Position Square Hole Autosampler Sample Rack, 30 mL Vials

    PerkinElmer

    This 24-position autosampler sample rack features square holes, with side length of 25.2 mm, designed for 30 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as numbered and…

  • 40 Position Square Hole Autosampler Sample Rack, 20 mL Vials

    PerkinElmer

    This 40-position autosampler sample rack features square holes, with side length of 20.6 mm, designed for 20 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as numbered and…

  • Polypropylene Racks for 12mm and 16mm OD Vials

    DWK Life Sciences (Kimble)

    Disposable polypropylene vial rack Lettered and numbered for indexing individual tubes Corners interlock for convenient stacking

  • 80 Position Round Hole Sample Rack for Oils Applications, 15 mL Vials

    PerkinElmer

    This 80-position sample/collection rack features wells designed for 15 mL vials. It's compatible with the ASX-260, ASX-280, ASX-520, ASX-520HS, and ASX-1400 autosamplers and the APS-1650.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.