Tube Rack

Compare Tool

Select up to 3 products

Tube Rack
1 - 32 of 1140
Sort
View
Show
  • 80-Place Tube Racks

    labForce (a Thomas Scientific Brand)

    80-Place Tube Racks. Fraction collector plate style. Versatile & efficient storage in bright, fluorescent colors. Holds tubes up to 2 mL, 11 x 26mm maximum. Rack dimensions: 226 x 67 x 28mm. Container dimensions: 236 x 85 x 52mm.

  • racks together for a custom rack solution Autoclavable polypropylene (PP) Heavy-duty construction is durable and chemical resistant Multiple colors available for benchtop organization at a glance Numeric markings for sample identification Versatile design accommodates different tube

  • …“Reversible” Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. The clear…

  • Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an engineered polymer developed by DuPont to have exceptional chemical and heat resistance. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Molded index…

  • Tube Racks

    MTC Bio

    …Bio’s benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. No. R1030 is a 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is needed. …

  • Organize over 100 samples in one rack Polyethylene racks provide practical methods of pipetting and storing a large number of samples Using alternate rows and rotating tubes makes it easy to keep track of the last tube filled Can be used in clinical labs for storage of samples Steam…

  • Dimensions: 246 x 105 x 64mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples…

  • racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for labeling and easy sample identification Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit 30mm racks

  • MCT/PCR Rack

    Bel-Art - SP Scienceware

    …double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for easy sample identification. Rack color assists in…

  • 96-Well Reversible Rack

    Heathrow Scientific

    …sample handling and storage Flip polypropylene rack from 96 wells for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are separated by molded-in grid…

  • …at a glance Versatile design accommodates different tube sizes on each side The four sides hold the following tubes: Eight – 50mL or 30mm diameter tubes Twenty – 20mm diameter tubes Twenty four – 15mL or 17mm diameter tubes Forty – 12mm diameter tubes

  • Stainless steel test tube racks up to 150°C Suitable for: 2 x A 12, 6 x A 24, 1 x RA 12, 6 x RA 24, 1 x AL 5, 3 x AL 12, 6 x AL 18, 6 x AL 25, 2 x ET 12, E 10, 4 x ET 20, E 20

  • Conical Tube Rack

    Thermo Scientific Nunc

    Fit most centrifuge tubes in the tightness-tested Thermo Scientific™ Nunc™ Conical Tube Rack. Hold 6 x 200mL tubes or 20 x 50mL tubes Epoxy/steel or expanded polystyrene foam Meets USP Class VI

  • Fits 0.2 mL tubes on one side and 0.5 mL tubes on the other 96 wells per side in 8 x 12 format Every well numbered Custom molded Includes secure fitting lid

  • Test Tube Stands

    Globe Scientific

    Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Three tiered design holds tubes securely Sturdy handles facilitate easy transport 4 Color options for organization of samples or benchtop

  • Stainless Steel Tube Racks

    Globe Scientific

    These specially shaped "Z" racks are rust proof and will hold up to repeated use. The wide base provides stability and prevents tipping. When not in use, the racks stack neatly inside one another to conserve benchtop space.

  • Test Tube Racks

    Dynalon

    …High-density polyethylene . Holds 12 test tubes, 18-20  O.D. tube size. Test Tube Rack (1210D16) Product Dimensions (l x w x h) : 8x4x2.375in High-density polyethylene . Holds 12 test tubes, 20-22  O.D. tube size. Test Tube Rack (1210D17) Product Dimensions (l x…

  • rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Work on the benchtop, float in the water bath Tubes are held tightly in rack to assure no “pop-up” tubes or…

  • 10mm Test Tube Foam Rack. Color: Gray 50 tube capacity

  • Dimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples…

  • Bel-Art® Poxygrid Test Tube Racks

    Bel-Art - SP Scienceware

    Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

  • Poxygrid® "Half-Size" Test Tube Racks

    Bel-Art - SP Scienceware

    …limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy Unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of…

  • …stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for labeling and easy sample identification  Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit…

  • 13 and 16mm Wire Tube Racks

    Heathrow Scientific

    Durable racks for transport or sample handling. Holds either 13 and 16 mm blood collection tubes Support capped tubes up to 18 mm dia 3 x 5 format Support capped tubes up to 30 mm dia 2 x 4 format Slotted bottom Chemically-resistant epoxy-coated steel wire racks Autoclavable

  • Foam Tube Racks

    Heathrow Scientific

    …minimal footprint Lightweight microtube racks are ideal for long-term studies or tube storage. Two-piece racks are constructed of expanded polystyrene (EPS) foam Extra spacing between wells allows easy gripping with fingertips Racks stack securely with nesting features on lid…

  • Unwire Polycarbonate Test Tube Racks

    Thermo Scientific Nalgene

    Usable in cold rooms and at subfreezing temperatures Racks can be used in water baths, as they do not float Similar to 9259S10 series, but constructed of polycarbonate. Racks’ upper two shelves and handles are clear; the bottom shelf is opaque. Can be autoclaved occasionally, but repeated…

  • Mega Rack® Clinical Tube Racks

    Heathrow Scientific

    …Mega Tube Racks are great for high throughput labs requiring large sample storage. Sturdy and light weight material for easy transport Alphanumeric identification for quick location and retrieval of tubes Place different test groupings into one rack and eliminate need for multiple tube

  • Cylindrical wells for tubes, vials, bottles, centrifuge shields, etc. Stable, one-piece construction Versatile racks offer wells and drying pins

  • Round Ice Bucket Test Tube Racks

    Bel-Art - SP Scienceware

    Racks can also be used in water baths as floating racks. Models 6106A52 through A54 have 30 large holes (17 mm dia.) that accommodate 15 mL conical tubes or 13 mL Falcon® tubes, as well as other test tubes with similar diameters. Model 6106A62 has 44 small holes that accommodate 1.5 mL tubes.

  • Deluxe Pipettor Stand

    Diversified Biotech

    …Cry-Tags® and/or Tough-Tags® and can also hold frequently used items such as markers Four section drawer accommodates tip boxes, plates, tubes, etc. Completely remove drawer for full access when loading tips Stand is completely accessible from either side and can be used by two…

  • The Flipper microtube rack is designed to hold either 96 0.5 mL or 96 1.5/2.0 mL style microcentrifuge tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. The Flipper is fitted with a clear polypropylene lid and both sides are labeled in…

  • Poxygrid® Labware Drain Stand

    Bel-Art - SP Scienceware

    Dry Test Tubes, Beakers, Flasks, and Other Labware For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting. Three rows of epoxy-coated hairpin-loop supports (14 in all) hold…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.