Microtube Box

10x10 configuration for 0.6ml tubes 8x8 configuration for 1.5/2.0ml tubes Temperature range: -80? to +121? Clear polycarbonate cover for easy identification Solid Polypropylene base

These low profile boxes are available in two sizes to accommodate standard 0.5 mL and 0.2 mL micro tubes and vessels of a similar size. They are designed to ensure that the tubes contained will remain in their appointed well even if the box is tipped or knocked when the lid is in place. …

…insert; lid is of clear polycarbonate Insert can accommodate up to fifty 1.5 mL microtubes. Usable temperature range -150° to +121°C. Gridded lid permits easy inventory control and can be written on with marker for box and tube identification. 2591C69 takes 84 - 0.5 mL tubes; 2591C73 takes 64 -…

… Store microtubes or cryogenic vials Easy open, friction fit lid Safe for low temperature storage Tubes: 1.5/2.0 mL Wells: 81 Well Dia: 12.3 mm Dimensions: 5.1 x 5.1 x 1.9 in (13 x 13 x 4.7 cm) Autoclavable Each Heathrow Scientific Microtube Storage box is designed…

…sample identification Polypropylene boxes will not degrade when exposed to moisture and ultra-cold temperatures as low as -80°C. Superior substitutes for cardboard boxes which tend to degrade and absorb moisture after prolonged use. Boxes with “telescoping” lids accommodate…

Secure storage for microtube and cryogenic vials For larger storage requirements of 1.5/2.0 mL microtubes or cryogenic vials Easy-open hinged lid with snap clasp 100 wells Well dia. 1.23 cm Autoclavable

Ideal for sample or case study storage. Made from polypropylene Great for smaller storage requirements of 1.5/2.0 mL microtubes or cryogenic vials Easy-open hinged lid with snap clasp Tubes: 1.5/2.0 mL Wells: 50 Well Dia: 12.3 mm Dimensions: 5.6 x 3.6 x 2.2 in (14.2 x 9.2 x…

For Matrix:  1.4ml Latch Rack (H=1 15/16"/49.84mm)  For Micronic: Roborack 96 with Standard Cover (H=1 15/16"/49.1mm)  Comorack 96 (H=2"/52mm)  Comorack 24 (H=2"/58mm) For Fluidx:  384 format Rack for Round Tube (H=5/8 "/17.1mm, each compartment…

…equipment, we supply upright freezer racks, chest freezer racks, liquid nitrogen freezer racks, canisters / cassettes and frames as well as laboratory boxes and dividers. By understanding the needs of the biotechnology industry, Custom Biogenic Systems provides superior laboratory cryogenic freezers…

…equipment, we supply upright freezer racks, chest freezer racks, liquid nitrogen freezer racks, canisters / cassettes and frames as well as laboratory boxes and dividers. By understanding the needs of the biotechnology industry, Custom Biogenic Systems provides superior laboratory cryogenic freezers…

…equipment, we supply upright freezer racks, chest freezer racks, liquid nitrogen freezer racks, canisters / cassettes and frames as well as laboratory boxes and dividers. By understanding the needs of the biotechnology industry, Custom Biogenic Systems provides superior laboratory cryogenic freezers…

Recyclable expanded polystyrene Snug fitting lid with finger grips 100 x 1.5 to 2.0ml Accepts regular or screw cap tubes in 5 rows of 20. Holes are alpha-numerically indexed. Dimensions: 3.75 x 13.25 x 2.5 inch (WxLxH).

Conical based tube positions provide greater support. Frosted writing areas

100 place box with hinged lid Polypropylene construction Will not degrade or absorb moisture Withstand freezing (to -80°C) and autoclaving Boxes hold 100 1.5/2.0 mL microtubes. The translucent lid is alphanumerically labeled for easy sample identification. A three-point…

Upright Freezer Racks for 50-Cell 1.5ml Microtube Storage Boxes Constructed of corrosion resistant stainsteel

Labcon 80-Place Rack Hinged Storage Box. For use with 80-place storage racks this box is autoclavable (122°C) and freezable (-80°C). Made of polypropylene. With hinged clear lid For use with 80 place tube racks Accepts one 80 place rack for freezer storage Freezable to…

MTC Bio's BetterBox is an all new polypropylene storage box, exclusively designed to hold 81 x 1.5mL or 2.0mL micro tubes neatly and securely in nine rows of nine tubes (snap cap or screw cap tubes fit equally well). The sturdy hinge and locking clasp mean

This tube rack and storage box of expanded polystyrene (EPS) holds 100 microcentrifuge tubes and cryovials up to 2.0 mL. The deep wells and conical bottom keep tubes fixed in place, and the lid fits tightly enough to ensure tube safety during handling. Stacking system includes circular feet on the…

…into Labcon pipet tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can in corpo rate dry ice for use with frozen samples on the bench. Holds 1.5, 1.7, 2.0 mL microtubes Made of polypropylene…

Super-strong acrylic construction Holds up to eight 80-well microtube racks filled with either 1.5 or 2.0 mL microtubes. These racks help you keep large numbers of microtubes organized on your benchtop. Plenty of room to slide the racks in and out. Vertical rack measures 236 x 157 x 234…

…Box top is clear for easy visual inspection of samples and bottoms are colored for additional identification and organization. Boxes accommodate 0.5, 1.5, and 2.0 mL microtubes, and most brands of cryogenic vials. Reinforced hinges, lock, and seal for secure storage Click fit lock ensures box…

BetterBox™ is an all new autoclavable polypropylene storage box, exclusively designed to hold 81 x 1.5mL or 2.0mL microtubes neatly and securely in nine rows of nine tubes (snap cap or screw cap tubes fit equally well). The lid cannot become separated or lost thanks to the sturdy hinge and…

Racks are for 100-Cell Hinged Top Plastic Boxes. Drawer Racks allow an easy access to fewer microtube boxes at a time thus protecting other samples in the rack from warming up. Constructed of corrosion resistant stainsteel.

…solvents Can be repeatedly frozen and thawed 5x5 (25-well), 9x9 (81-well), or 10x10 (100-well) boxes available Compatible with 0.5ml, 1.5ml or 2.0ml microtubes and cryogenic vials Boxes feature numbered grids for sample identification Drain holes and air vents minimize condensation …

Manufactured of polypropylene, these autoclavable boxes are stackable for sample storage in 1.5 to 2.0 microtubes and 1.0-2.0ml crygenic vials. Boxes can be used at temperatures from -90°C to +121°C. Boxes feature a hinged lid connected to the base and a locking system to ensure secure…

Racks are for 50-Cell Hinged Top Plastic Boxes. Drawer Racks allow an easy access to fewer microtube boxes at a time thus protecting other samples in the rack from warming up. Constructed of corrosion resistant stainsteel.

…and mild organic solvents Can be repeatedly frozen and thawed Compatible with 0.5ml, 1.5ml or 2.0ml microtubes and cryogenic vials (Item 1164H70 only compatible with 0.5 ml) Boxes feature numbered grids for sample identification Drain holes and air vents minimize condensation …

…polypropylene, these freezer boxes can accommodate 0.5, 1.5 and 2.0 mL microtubes as well as most manufactured brands of cryogenic vials. The boxes are slightly taller than most competitive freezer boxes and can store tubes up to 53.5 mm in height. Cryo Storage Boxes can withstand harsh…

…having to remove the entire rack from the freezer. Easily retrieve sample boxes by simply sliding out the individual rack drawer. Drawers provide quick storage and retrieval of plates and microtube boxes Easily access boxes from either side of rack Sturdy corrosion-resistant stainless steel…

…having to remove the entire rack from the freezer. Easily retrieve sample boxes by simply sliding out the individual rack drawer. Drawers provide quick storage and retrieval of plates and microtube boxes Easily access boxes from either side of rack Sturdy corrosion-resistant stainless steel…

…top plastic boxes made of polypropylene offer an alternative storage system for all microtubes up to 2.0 ml and standard 1.2 ml cryovials.The grid is alpha-numerically matrixed with 1-10 and A-J characters hot stamped directly onto the grid for fast, easy sample identification. Boxes fit into…

…never misplaced or mixed up Alphanumeric labeling featured on the lid, bottom, and four sides enables quick and easy identification of samples Holds 0.5ml/1.5ml/2.0ml microtubes and cryogenic vials Suitable for liquid nitrogen freezing (after adding vent holes, and using cardboard dividers)