Tubing

Compare Tool

Select up to 3 products

1 - 26 of 26
Sort
View
Show
  • Permits packing of column without excessive drop impact. Also used for side arm introduction of effluent or may be used for pressurized operation. Used in conjunction with 5029 Nylon bushing. Supplied straight or bent. Hose conn. are size C. Tube is 8 mm O.D.

  • Transition adapter to convert a sanitary flanged apparatus 2 to a standard taper inner joint. Made of virgin PTFE.

  • 14 psi rated, graduated, netted clear or plastic coated solvent reservoir bottles featuring an Omnifit, 3-valve cap. Only PTFE & Tefzel wetted surfaces. Individually controlled valves permit the application of gas under pressure for venting, flushing,

  • Standard collecting tube with glass stopcock and capillary tubing for connecting to rubber tubing and syringe sampling port with septum. Available with either glass or 1:5 taper PTFE stopcock plugs. For replacement stopcock plugs, see 8223 (PTFE), 8224 (glass).

  • Polypropylene tubing used to make connection between pressure source and 12517 Quick disconnect on side of Pressure Manifold and between other side of manifold the Pressure Reactor. Sold in 100' coil.

  • Threaded both ends and with additional #7 threaded side opening for introduction of samples by hypodermic syringe. #7 thread at top is supplied with 5029 Nylon bushing and Fetfe O-ring for use with 5831, 5832 adjustable feed tubes. Size listed is Ace-thred designation which refers to I.D. of tubing…

  • Internal threaded bottom drip adapter with or without flow regulator valve. 1/4"-28 or NPT internal threads. Supplied with packing support and o-ring. For use with all Ace-Thred chromatography columns.

  • All three ends are threaded the same size. For bushings, see 7506.

  • Inside diameter tolerance of 0.0004", Trubore, a trademark of Ace Glass Incorporated, stands for precision bore tubing of the highest quality, maintained by production techniques, careful selection of raw materials, and step-by-step quality control. Trubore tubing is used in ACE items such as our…

  • Sample Tube

    Ace Glass

    Designed by Dr. H.R. Krouse, University of Calgary, for use with 7408 in H2O18/H2O16 determinations. CO2 from the equilibration flask is transferred to the sample tube for isotopic analysis. Unit consists of PTFE plug with FETFE O-Ring and glass vessel with 5mL tube at bottom.

  • Used to connect a vial or a bottle to the vapor tube of a rotary evaporator. Fabricated from PTFE, one side is a standard taper outer joint with rib for using clamp such as 7598, other end is a female vial or bottle thread.

  • Bubbler, No-Air

    Ace Glass

    Bubbler with metering valve for precise control of inert gas introduction and features 9mm OD tube-end side arms for use with 3/8in ID vacuum tubing.

  • 304 Stainless Steel adapter for matching glass beaded process pipe to male NPT fittings, gauges and flanges.

  • Connectors, Tubing

    Ace Glass

    Small tubing connector comprised of a TFE, 1/4"-28 UNF 2B male nut and a Kel-F wedge insert. Designed for use with our 5838 Chromatography adapters, 1.5-2mm ID tubing won't slip off or blow out during vacuum or pressure applcations. Easily assembled wi

  • Ace-Thred, compression fitting, PTFE inserts. Use with Ace reaction heads, codes 12858, 12860, 12862 and 12864.

  • 304 Stainless Steel adapter for matching glass beaded process pipe to female NPT fittings, gauges and flanges.

  • Single piece, high purity graphite ferrules, no back ferrule needed, no organic binders used. Ideal for glass-to-glass or glass-to-metal connections. All sizes are used with #7 Ace-Thred. Due to its high purity and unique properties, these ferrules make a monomolecular seal, one of the strongest…

  • Easy Adapter allows connection of small bore tubing to Ace-Threds without having to turn vessel or tubing when removing adapter from vessel, i.e., 5539 Solvent Reservoirs. Fabricated from glass-filled PTFE. One end has one or two female 1/4"-28 threads with helicoil, other end a silicone rubber…

  • Designed to make a leak-tight seal without the use of O-Rings. Simply tighten until white ring appears indicating a seal has been made, then secure locknut. No need to over-tighten. Ace-Thred adapters feature a 1/4-28unf tap, with or without a 18-8 stainless Helicoil insert for durability. See our…

  • Adapter, Feed Tube

    Ace Glass

    Threaded both ends and hose connection on side arm. #7 thread at top is supplied with 5029 Nylon bushing and Fetfe O-ring for use with 5831, 5832 adjustable feed tubes. Size listed is Ace-thred designation which refers to I.D. of tubing above lower thread and corresponds to 5820 column diamater.

  • Ace Safe threaded tubing connectors used to connect flexible tubing to #7,#11 or #15 Ace-Threds. Allows for easier connect-disconnect of tubing. A much safer design than glass hose barbs. All PTFE construction for lower extractables and higher temperature capability than the standard…

  • Transition adapter to convert beaded pipe to sanitary flange. Available in 304 stainless steel or virgin PTFE.

  • Process pipe padded hanger with mounting foot.

  • Omnifit shutoff adapter with 1/4"-28 male thread and 1/8" PTFE tubing.

  • PTFE male nipple, 1/4"-28", for use with packed columns and solvent delivery systems.

  • Permits packing of column without excessive drop impact. Also used for side arm introduction of effluent or may be used for pressurized operation. Used in conjunction with 5029 Nylon bushing. Supplied straight only. Tube is 8 mm O.D. with luer connection.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.