Compare Tool

Select up to 3 products

1 - 32 of 823
  • Flexible, smooth-walled vacuum tubing High-quality gum rubber Cartons contain 48 to 50 feet (14.6 to 15.2 m) of vacuum tubing. Listings indicate i.d. x o.d. x wall thickness in inches. Vacuum tubing is 10 ft per pack and 50 ft per carton.

  • Looking for rubber tubing that can take the heat? Silicone is a synthetic rubber that’s more resilient than natural rubber, making it a popular choice for vacuum pumps. Tubing won’t impart taste or odors and maintains its flexibility over time. Use with water, air, and food and…

  • Capillary Tubing


    Pyrex Borosilicate capillary Tubing, single lengths

  • Smooth-walled, semi-transparent Pure, natural, rubber latex Made by dip process from virgin stock Strong and highly resilient Uniformly cured for superior resistance to aging and oxidation This non-toxic, autoclavable tubing has the flexibility and chemical-resistance…

  • Designed for routine use in all NMR spectrometers, Wilmad Economy NMR Tubes are guaranteed to fit tightly in any spinner turbine and have zero NMR background. Best OD tolerance in the industry and a 30% thicker wall than any competitors' product Manufactured in an ISO 9001:2008 USA…

  • Low-Pressure Tee Assemblies

    IDEX Health & Science

    Use Tee connectors in a variety of low-pressure situations throughout your fluidic system. Handy mounting holes make it a snap to mount connectors. Tee connector assemblies come complete with nuts and ferrules.

  • Tasteless, odorless, non-cytotoxic and non-hemolytic Contains no phthalate plasticizers or peroxides that can leach out into transported fluid Low binding suface to minimize absorption of proteins and food products Autoclavable; also can be sterilized by gamma radiation, EtO and chemical…

  • Pyrex® NMR Capillary Tubes

    SP Wilmad-LabGlass

    Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

  • Strong, flexible, extruded rubber latex Ideal for general laboratory use Smooth walls are of uniform thickness; meets Federal Specification  ZZ-T-831c, Types I, III, IV and V. Listings give i.d. x o.d. x wall thickness, in inches.

  • Spinner Bearing NMR Tube Tester

    SP Wilmad-LabGlass

    To increase success in high field NMR experiments, this tester will ensure shimming quality of your glass tubes. Useful in labs that wash, dry and reuse precision NMR tubes Warped tubes will bind in the spinner bearing while good tubes spin freely Keep a tube tester beside every NMR…

  • Lattice Connectors

    Bal Supply

    These slotted lattice connectors are made of cast aluminum with a smooth round surface for connecting lattice rod supports for laboratory apparatus. These spherical designed connectors assure rigidity, solidity and freedom from breakage. The U-shaped slots on each side take standard ½ inch rod and…

  • MPP PVC Tubing Flared, 0. 95mm, white black, 12/pk. Flared tubing is easier to change and more reliably connected than non-flared small-bore tubing.

  • Pyrex® borosilicate rod. Sold by the length. *** ALL WEIGHTS AND QUANTITIES ARE APPROXIMATE ***

  • Conical, straight hose connectors for various hose sizes. PP Sterilisable

  • Tygon® S3™ E-3603 Laboratory Tubing

    DWK Life Sciences (Kimble)

    This tubing is used for drain, vent, and general laboratory applications, and is specially formulated for resistance to flex-fatigue and abrasion. It has heavy walls to withstand a full vacuum, and may be used on a variety of glassware including filter flasks, condensers, and distillation adapters.…

  • Permits packing of column without excessive drop impact. Also used for side arm introduction of effluent or may be used for pressurized operation. Used in conjunction with 5029 Nylon bushing. Supplied straight or bent. Hose conn. are size C. Tube is 8 mm O.D.

  • PerkinElmer offers a wide range of high-quality peristaltic pump tubing for all of your ICP-OES and ICP-MS applications. Remember to replace your tubing frequently and always keep spares on hand.

  • Ace-Thred, compression fitting, PTFE inserts. Use with Ace reaction heads, codes 12858, 12860, 12862 and 12864.

  • Adapter - Extra Long, PEEK

    IDEX Health & Science

    Maintain secure connections even under high pressure Securely join fluid pathway components Manufactured from 316 stainless steel or inert polymers Holds tight connection even through vibration

  • Chrome plated brass connectors with Buna-N O-Ring, made by Colder Products, feature easy-to-use slide locks for leak-free, in-line connections, and automatic shut off when disconnected. Ideal for liquid and gas connectors in biomedical instrumentation and general industrial applications …

  • Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the user’s thumb. Sprayer is used with low pressure air (5/PSI) or rubber pressure bulb. Sprayer consists of an…

  • 3/8 inch diameter vinyl intake tubing, 500 ft.

  • Inner diameter 0.030 in. (0.76 mm). PerkinElmer offers a wide range of high-quality peristaltic pump tubing for all of your ICP-OES and ICP-MS applications. Remember to replace your tubing frequently and always keep spares on hand.

  • Peristaltic Pump Tubing

    Saint Gobain Plastics

  • Tubing Connectors Assortment

    United Scientific Supplies

    A convenient assortment pack of 36 tubing connectors for your lab, for use with a variety of tubing sizes and connections. Pack includes 9 each (3 each x 3 sizes) of L-shaped, T-shaped, Y-shaped, and 4-way polypropylene connectors that are autoclavable.

  • Withstands four times the working pressure of non-reinforced tubing Double-wall tubing with polyester braid between inner and outer PVC sheaths Meets FDA, 3-A and NSF criteria Clear wall for visualization of flow Compatible with virtually all non-solvent chemicals Braid is…

  • Minimize absorption of proteins and food products with Thermo Scientific™ Nalgene™ 50 Platinum-Cured Silicone Tubing for Peristaltic Pumps. This flexible and durable tubing features a low-binding surface, making it ideal for a variety of pump and transfer applications in…

  • Qosina offers an extensive line of luer-activated valves in a variety of configurations that are in stock and ready for immediate delivery. Ideal for use in flushing, sampling and IV applications, Qosina part #80147 is a swabbable, needleless injection site equipped with a male luer lock connector.…

  • Vacuum Tubing


  • Glass Capillary Tubes

    GSC International, Inc.

    Our Capillary Tubes are 75mm in length and have an inside diameter of approximately 1.1mm to 1.2mm and an outside diameter of approximately 1.5mm to 1.6mm. We offer tubes that are open on both ends and tubes that are closed on one end. They are packed in vials of 100 tubes. PRODUCT WARNINGS …

  • Tygon® Ultra Chemical Resistant Tubing offers an unequaled combination of chemical resistance, clarity and flexibility. Tygon® Ultra Chemical Resistant Tubing is virtually unaffected by acids, bases, ketones, salts and alcohols, fitting the requirements of many applications from battery acid…

  • High Vacuum Pump Tubing

    Fischer Technical

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.