Flasks

Compare Tool

Select up to 3 products

1 - 32 of 194
Sort
View
Show
  • Flask, Reaction, Jacketed with O-ring Groove Flange

    Ace Glass

    Jacketed reaction flask with round bottom. Flat flange is grooved for using an o-ring (instead of a flat gasket) to seal to a head. Jacketed for temperature control of ingredients. Supplied with CAPFE o-ring. Codes -01 thru -04 have 28/15 o-ring ball joints on inlet/outlet. Codes -301 thru -304…

  • 47mm Membrane Filtration Apparatus

    Ace Glass

    Borosilicate glass filtration apparatus accomodates 47mm diameter membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base piece. The unit is easy…

  • Flask, Round Bottom, Four Neck

    Ace Glass

    Round bottom flask with four necks arranged 3 in-line and one at 90 degrees. The three side necks are angled.

  • Flask, Erlenmeyer, Standard Taper Joint

    Ace Glass

    Erlenmeyer flask with standard taper joint.

  • Receiving Flask, Single Neck, Safety Coated

    Ace Glass

    Replacement flask for Buchi rotary evaporators. Round bottom flasks with a 35/20 single neck and safety coating.

  • Flask, Single Neck, Spherical, Receiving

    Ace Glass

    With short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall.

  • Reaction Assembly, Spherical Flask, 12L thru 72L

    Ace Glass

    Complete reaction assembly available in 12L, 22L, 50L and 72L spherical flask capacities. Unit is complete with heating mantle and controls, mechanical stirrer and controls, pressure equalizing funnel and pilot plant condenser.

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    Replacement evaporator flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Safety coated.

  • Gasket, Reaction Flask

    Ace Glass

    Flat gaskets for sealing two flat ground glass surfaces. Plain flat or grooved PTFE gaskets reduce breakage and make an effective seal. Our flat, exclusive FETFE gasket provides a leak-free seal with slight clamp pressure. These are designed especially for use with our conical or flat ground flange…

  • Scale-Up Series™ Jacketed Cylindrical Flasks

    Ace Glass

    Scale-Up Series™ jacketed cylindrical flasks with Easy Drain glass valves and KF flange inlet & outlets. The flask is graduated on both sides allowing for either left or right hand flask orientation. The Easy Drain valve is designed to prevent accidental removal when opening and incorporates…

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights. Microscale versions, codes -43

  • Flask, Single Neck, Flat Bottom

    Ace Glass

    With long neck and standard taper 24/40 outer joint.

  • Flask, Round Bottom, Four Neck

    Ace Glass

    Round bottom flask with four necks arranged 3 in-line and one 10/30 joint at 90 degrees. The 500ml size has angled side necks while all other sizes feature vertical necks. Available in heavy wall.

  • Kuderna-Danish Evaporative Concentrator

    Ace Glass

    For concentration of materials in volatile solvents. Combines rapidity, simplicity and quantitative efficiency including minimization of entrainment escape and transfer losses. Available in 250ml, 500ml, 1L flasks, with a 19/22 inner joint on bottom of flask, 24/40 on top. Choice of Snyder or…

  • Fernbach Flask, Baffled, Plain Neck

    Ace Glass

    Fernbach style culture flask with long style straight neck for either plastic or stainless steel closures, see Ace 3917 and 3918 product families. The bottom of the flask is triple baffled to achieve maximim oxygen transfer to the culture medium. Caution! Do not place on direct heat source.

  • Instatherm Reaction Flask

    Ace Glass

    This integral heating element eliminates the local super heating com- monly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. The response is raoid and accurate the attention can be directed to contents instead of the pot. supplied with cord. Flask…

  • Filtration apparatus for 75mm OD membranes or filter paper

    Ace Glass

    Filtration apparatus for 75mm OD membranes or filter paper. Ideal for solvent recycling and other filter applications. All threaded apparatus eliminates need for clamps. Course glass fritted disc is interchangable. Gl80 wide mouth bottle with #15 Ace-Safe connector for vacuum connection on side.…

  • Instatherm Flask, High Temp Type, Two Necks

    Ace Glass

    Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and angled standard taper reinforced outer side neck.…

  • Flask, Flat Bottom, Three Neck

    Ace Glass

    Flat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.

  • Flask, Pear Shaped, Two Necks

    Ace Glass

    Pear shaped flask with outer joints. Microscale version comes with two 14/10 outer ground joints externally threaded to allow an O-RING-CAP-SEAL type connection with mating inner joint. Supplied with holed caps, PTFE-faced septa and FETFE O-Rings. For

  • Coupling, Reaction Flask

    Ace Glass

    KF style flange clamp for our 200mm (8 in), 300mm (12 in) and 400mm (16 in) kilo scale reactor vessels. The 200 & 300mm clamps are manufactured of black, phenolic resin while our 400mm clamp is black, powder coated aluminum. Purchase the clamp and appropriate gasket separately. We recommend the…

  • Vessel, Reaction, Jacketed, Ultrasonic, 10-50mL

    Ace Glass

    Similar to 9844-07 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -30 includes our 7506-10 #25 Ace-Thred bushing used to secure a…

  • Flask, Single Neck, Flat Bottom

    Ace Glass

    Flat bottom flask featuring a single, short neck with a standard taper outer joint.,/p>

  • Reaction Flask, Spherical, Jacketed

    Ace Glass

    Spherical, jacketed reaction flask with 100mm (4") flat flange top. Jacket inlet/outlets available with either tangentially sealed 28/15 o-ring ball joints or with Ace-Thred connections. Use 6496-10 clamp to secure head to flask.

  • Jacketed Cylindrical Flask w/Beaded Pipe Inlet and Outlet

    Ace Glass

    Thomas Nos. 1165M15, 1165M16, 1165M17, 1165M18, 1165M19, 1165M20, 1165M21 Jacketed cylindrical flask with flush seal and beaded pipe²inlet and outlets. The flask is graduated on both sides²which allows for either left or right hand orientation.²Features a Schott-Duran style o-ring…

  • Flask, Volumetric, 12/18 Stopper (Class A)

    Ace Glass

    Specially designed, standardized flasks, with stoppers. All capacities have 12/18 joint with approximately 10 mm opening. Cylindrical body affords better mixing and drainage, and ease of withdrawal using pipets. Wide base offers greater stability. Uppe

  • Flask, Receiving, Rotary Evaporator

    Ace Glass

    Graduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.

  • Flask, Round Bottom, Three Neck, Spherical joints

    Ace Glass

    Round bottom flasks, three vertical necks, spherical outer joints. Available in standard and heavy wall.

  • Trypsinizing Flask, Baffled, Sidearm, Screw Caps

    Ace Glass

    Trypsinizing flask for converting of homogenous tissue samples into cell suspensions by digestion of connective tissue. Side port has dam below the side arm to prevent undigested tissue from being poured out while decanting cells. Flask has GPI thread top and side arm cap. The three extra deep,…

  • Still, Short Path, with 24/40 Joints

    Ace Glass

    Full size 24/40 jointed, low holdup, short path still, original plain version or jacketed with indents. Extension tube from still body allows positioning of drop directly over receiver flask. Gas inlet tube is positioned in distillation flask with 5028 Adapter and secured with a #7 Ace-Thred.…

  • Flask Single Neck, Side Arm, No-Air

    Ace Glass

    Round bottom flask with single neck with standard taper joint and a 8mm side outlet with either a 2mm glass stopcock or a 0-3 inlet valve. Ideal for Schlenk lines and either NO-AIR or vacuum applications. Includes one 9096-32 septa for side arm.

  • Flask, Rotary Evaporator, Large

    Ace Glass

    Rotary evaporation flasks available plain, poly-coated or ambered. Poly-coating has a maximum temperature of 100 degrees C and can withstand acid and solvent splashes but not soakings. Small flange is 90mmod,67mmid and 18mm thick. Medium flange is 100mmod,72mmid and 19mm thick. Large flange is…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.