Polypropylene Tube

Non-sterile, precision molded, round bottom test tubes for general purpose laboratory work Polypropylene tubes are more chemically resistant than polystyrene and are appropriate for use with organic solvents and stronger acids (except oxidizing acids), alkalis, alcohols, chlorinated &…

…contamination risk •External threading •Free-standing •Star-shaped bottom for easy opening in tube racks •Graduated with large writing surface •Recommended for vapor phase LN2 storage Synonyms: cryo tubes Legal Information: TPP is a registered trademark of TPP Techno Plastic Products AG

With ringed arms for attachment of tubing Autoclavable

Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at…

…Force measured in g-force for materials with a specific gravity of 1.0, used in an appropriate rotor with correct cushion and safety precautions. Tubes used with organic solvents at temperatures below 0°C may have lower RCF ratings.)    Tube dimensions and volumes are approximate

Polypropylene tubes have particularly good thermal, chemical and mechanical stability Material is ideally suited for the storage of chemical and biological samples Diameter: 17 mm; height: 100 mm Nominal volume: 14 ml Working volume: 12 ml

With two-position vent stopper that fulfills two functions: When attached lightly, this enables a uniform ventilation of the tube contents When attached firmly, by pressing in the stopper further, an airtight closure of the tub

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Polypropylene tubing used to make connection between pressure source and 12517 Quick disconnect on side of Pressure Manifold and between other side of manifold the Pressure Reactor. Sold in 100' coil.

2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually…

Pre-loaded 2 mL disruption tubes are ideal for fast and simple setup - add samples and you're ready to go. Vials are self standing, making it easier to add samples. Pre-filled with your choice of molecular biology grade silica beads, acid washed silica or zirconia beads, silica beads, or steel…

Corning® polypropylene (PP) centrifuge tubes are ideal for applications requiring large volume centrifugation.  Support cushions (2602A46 for 250mL or 0330E07 for 500mL) must be used with this product unless the centrifuge rotor has appropriate V-bottom cushions Polyethylene plug…

This 12 x 75mm polypropylene test tube has a capacity of 5ml Tube features a round bottom and is autoclavable Sold as a pack of 100 tubes

With ringed divergent arms for attachment of tubing Autoclavable Outer diameter of arms is given in listings.

… Frosted writing area Attached lids provide a tight leakproof seal, can be easily opened and allow trouble-free piercing. Tubes are leak tested to 20,000 RCF for 20 minutes at 20°C with an aqueous solution. Tubes are packaged in two bags of 500 tubes per case, except for 2591L95.

With ringed divergent arms for attachment of tubing Autoclavable Outer diameter of arms is given in listings.

…microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 2.0 mL microcentrifuge tubes are only…

Axygen® 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Available in 0.65mL single MiniTube or 1.1mL single MiniTube and 8-tube or 12-tube strip…

Autoclavable Non-scratching Tapered sides permit nesting Baskets are ideal for applications such as sterilization, incubation and storage. Molded, one-piece design has a mesh opening of 9.5 mm.

Ready-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.

Polypropylene, self-standing 2 mL microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64 inch x 1 27/32 inch long (10 mm x 47 mm). Tube is not pre-cleaned. Grinding load per tube is 60-120 mg; mixing load 1 mL. Sold in package of 500. Ideal for fast and simple…

…welfare refinement over rigid metal tubes, and part of our "Be Nice" family of products. We manufacture the feeding tubes using medical grade materials to minimize the risk of interactions with test compounds. The tube is constructed of polypropylene, the same material used in plastic…

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

Translucent polypropylene tubes, 13 mm x 100 mm, are designed to provide excellent chemical resistance.

… Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5,…

Translucent polypropylene tubes, 13 mm x 100 mm, are designed to provide excellent chemical resistance.

Translucent polypropylene tubes, 13 mm x 100 mm, are designed to provide excellent chemical resistance.

Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.

Translucent polypropylene dual position caps used with 14 mL polypropylene tubes (N0777941).