Gas Sampling Tube

The vertically mounted Carb Octopus air sampling manifold design features an inner tube which allows condensation to drip to the collection bottle and away from the #7 Ace-Thred instrument ports. Available in standard 4 or 8 port configurations.

Tube is designed for the collection and storage of gas samples. The 125mL has a sidearm O.D. of 9mm, the 250 and 500ml have a sidearm O.D. of 13mm, but with the addition of a syringe sampling port for use with a CG-3022-05 or CG-3022-22 septa. Supplied complete with one CG-3022-05 red rubber septa.

Sample Gas Transfer Tubing Assembly

Standard collecting tube with glass stopcock and capillary tubing for connecting to rubber tubing and syringe sampling port with septum. Available with either glass or 1:5 taper PTFE stopcock plugs. For replacement stopcock plugs, see 8223 (PTFE), 8224 (glass).

Polypropylene gas sampling bulbs have polypropylene stopcocks with free-turning Teflon® PTFE plugs. Ends accept 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing Tube body is 5.1cm (2") O.D. x 22.2cm (8-3/4") long Stopcocks are 6.4cm (2-1/2") long Maximum recommended…

…bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose the film type appropriate for your application. All our bags feature a polypropylene combo valve with hose connection to fit 3/16" ID tubing…

… Leakproof Applications include gas sample analysis, extraction of air samples from smoke stack exhaust systems, monitoring air quality and calibrating instruments in the field. Sturdy FEP bags are 5 mil thick and have low permeability to limit sample loss. Have unlimited storage life before…

…bag sampling for a variety of applications: stationary sources emissions; workplace atmospheres; ambient, indoor air quality; and breath analysis. Choose the film type appropriate for your application. All our bags feature a polypropylene combo valve with hose connection to fit 3/16" ID tubing…

This unique grab sampler is specifically designed for soil gas sampling by allowing the connection of tubing coming from the soil gas sample port. The innovative design minimizes connections and leaks and houses a critical orifice in the tee fitting. It also incorporates a vacuum gauge and 2…

These small canisters are designed for controlled sampling, such as personal air sampling, as an alternative to tube and pump samplers. The 1,000 cc canister is suitable for sampling volatile organic compounds in air according to methods TO-14A, TO-15, IP-1A, ASTM 5466, OSHA PV 2120, and NJ DEP Low…

A high velocity impinger which passes 6L/min (corrected to engineering gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.035in capillary tip that is positioned 4mm above…

…AGI-4) which passes 12.3 to 12.6L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary tip that is positioned 4mm above…

…AGI-30) which passes 12.0 to 13.0L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary tip that is positioned 30mm…

Straight sampling manifold, available with one end threaded, the other end reduced for use with 7506 bushing, or both ends threaded for use with either 7506 bushing or 5841 coupling. Also available with adjustable depth, threaded sampling ports for use with up to 7mm O.D. tube. Code identifies I.D.…

…optimized for sampling volatile organic compounds (VOCs) onto thermal desorption (TD) sorbent tubes Small, lightweight, easy to use, and intrinsically safe—ideal for personal monitoring and a wide range of other air and gas sampling applications Compatible with any TD tube (up to a max…

Gas collecting reservoir, described in Microscale Organic Laboratory, Mayo, Pike, Butcher, as a means of collecting and sampling gaseous products when using 9586 Capillary Gas Delivery Tube. Open-bottom tube has single line graduation at 3 and 4mL level and 20-400 thread at top. Supplied with cap…

Featuring a side outlet in the body for a self sealing syringe stopper, these borosilicate glass Gas Collecting Tubes are useful in gas chromatography or mass spectroscopy. Stopcocks have PTFE plugs. For additional rubber stoppers, see ML-1940.

The ESS Air Sampling Bag incorporates a two opening system for sampling and extraction. The side port/stem (3/16" OD) allows filling with a pneumatic pump and tubing, and for rapid emptying of the bag. The top of the valve is

Gas inlet adapter with 45/50 inner joint, is used for connection of the gas source to the lower reservoir. Inlet connection is 1/2” Swagelok® tubing for use with CG-1975-20 compression fitting. Adapter is available in 3 styles. Style "A": Adapter has a large 25mm x 70mm…

Designed by Dr. H.R. Krouse, University of Calgary, for use with 7408 in H2O18/H2O16 determinations. CO2 from the equilibration flask is transferred to the sample tube for isotopic analysis. Unit consists of PTFE plug with FETFE O-Ring and glass vessel with 5mL tube at bottom.

Microscale bent capillary gas delivery tube for transferring gases generated during reactions to storage containers, such as 9588 Sampling Reservoir. With inner joint.

3L 5-Neck heavy wall, round bottom flask lower reservoir for gas scrubber. Flask has a 60mm Duran Flange center neck, 2ea 45/50 outer joints, and 2ea 24/40 outer joints. Drain valve is a 0-14mm with Perfluoro o-rings. Valve is offset from the bottom of the flask to permit solids to settle and…

Condenser for use in cooling of the scrubbing fluid. Graham coil type condenser having 1/2" Swagelok® tubing for use with CG-1975-20 compression fitting. Overall length is ~350mm with effective length of 250mm. Hose connections have 9mm OD small serration and a 10mm OD large serration.

Gas Analyzer Standard Kits (2714T95 to T97) Calibration kits contain one box of 2 calibration mix cylinders, 2 regulators, 2 pieces of stainless steel 1/16 in. gas sampling tubing, and 1 carry case, all packaged separately. Gas Analyzer Standard Cylinders (2714T90 to T94) Cylinder…

…glass raschig rings column packing material, exhaust gas outlet column, top shower head adapter, PTFE diaphragm liquid transfer pump, 3ea quick release column clamps, 3ea envelope style gaskets, fluid cooling condenser, gas inlet adapter, PTFE tubing and 5ea PFA compression fittings. NOTE: STAND…

The Gas and Vapor sampler enables spot collection of environmental gas samples or low pressure gas streams in 200cm3 impervious resealable bags. Gas and vapor collection Resealable sample bags Ideal for field analysis

PTFE connecting tube for connection to digestion vessels with 8 and 16 position Gas Containment Manifold.

Adapter attaches to the top of the exhaust gas outlet column and has an all glass shower head to disperse the scrubbing fluid down into the absorption column. Inlet connection is 1/2" Swagelok® tubing for use with CG-1975-20 compression fitting.

…the gas detector pump precisely match the reaction of the reagent system in the tube. The Draeger Tube Pump delivers the correct volume and must also pull the sample through the Draeger Tube at the proper rate. Basically, the pump and tube form a sampling unit. To interchange the pumps and tubes of…

…tube from etching effects of strong acids containing fluoride ions. Liners are 8 in. L and fit snugly into most common 7 in. L thin-wall tubes. A PTFE plug to close each liner is included. Not recommended for elevated temperature studies. Synonyms: Wilmad nmr tubes; nmr sample tubes; nmr tubes

…tube from etching effects of strong acids containing fluoride ions. Liners are 8 in. L and fit snugly into most common 7 in. L thin-wall tubes. A PTFE plug to close each liner is included. Not recommended for elevated temperature studies. Synonyms: Wilmad nmr tubes; nmr sample tubes; nmr tubes

Sample Vault caps have superior holding and sealing capabilities which eliminate cap/tube failure in your instrument. The patented design incorporates a white band positioned on the NMR tube that aligns with the base of the cap, indicating a properly locked position.The superior Sample Vault cap…