Vial Adapter

…connection of standard laboratory dram sample vials directly to the vapor tube or a bump trap of a rotary evaporator. Adapters have a top outer joint of the listed size and a 20-400 G.P.I. thread at the bottom. A PTFE-lined, polypropylene, double-threaded connector attaches the vial to the adapter.

These threaded connectors provide a convenient method to connect standard screw thread sample vials to glassware with GPI threads and to standard taper joint adapters.. Excellent for collecting samples from rotary evaporator traps. Made of glass filled nylon with inert PTFE inner seals. Temp. range:…

Adapters simplify the transfer of powders/solids from flasks into vials. PTFE adapters have a knurled gripping ring at the top to facilitate removal of the adapter from the flask joint. Adapters are available to accommodate sample vials (GPI threads) and scintillation vials (22mm threads). Allows…

Used to connect a vial or a bottle to the vapor tube of a rotary evaporator. Fabricated from PTFE, one side is a standard taper outer joint with rib for using clamp such as 7598, other end is a female vial or bottle thread.

PTFE connecting adapters and glass conversion adapters for connecting GPI threaded vials to a rotary evaporator vapor tube or trap. Both are suitable for vacuum work. PTFE connecting adapters are available with FETFE or Chemraz o-rings. Order Chemraz if you are using Methylene Chloride or Acetone.…

…adapter, and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from being sucked into the vacuum line. Also, the disposable filter funnels have a 80mm long stem so that the glass vacuum adapter is…

…tubes or syringes. The adapter provides for easier sample concentration and clean-up while reducing the chances of cross-contamination. Adapter with 20-400 GPI thread allows for transfer from vial to vial. Kits are available with one each of the glass adapters, PTFE delivery stem packaged…

…logger. Colorimeters include six, 25 mm screw top sample vials (except 3075B30 which includes five, 10 mm cuvettes), instruction manual and a tough plastic carrying case. Power requirements: one 9 V battery; optional 110 V and 220 V AC adapters are available. Please Note: Items 3075B70 and…

PTFE adapter allows convenient connection of a Microwave vial to a Rotary Evaporator Bump Trap having a standard taper joint size. Lower portion incorporates a threaded black Acetal compression cap that is slotted to accept the flange fitting on the vial.

…testing process when used with the Steritest(R) Symbio pump, specific accessories and high-quality culture media and rinsing fluids. A vented needle adapter vents and transfers the test product from large volume containers with a septum to the Steritest(R) NEO device. The red canister base indicates…

…double packed for the quick transfer into sterility testing environments, simplifying decontamination procedures and saving time. A vented needle adapter vents and transfers the test product from large volume containers with a septum to the Steritest(R) NEO devices. The blue based canisters indicate…

…shield on the heating block keeps the exterior surface area at a temperature that is safe to touch. For example the PTFE shield would be approximately 80°C on vials heated to 180°C.Please Note: Heater block adapter is designed for use with ALL OP-6600 centrifugal vacuum evaporator blocks.

48 SBS vial holder. Commonly used with 500µL to 2mL uncapped Screw cap vials (or similar sized vials). The rack adapter supports the vials for use on liquid handling deck robots and for use in the VolumeCheck384.

…cylinder (6881C). Vial set consists of one complete vial and three spare cylinders. Sample capacity up to 25 ml. Must be used with 6884 and 6886 Adapters. Mid-Size Vial Adapter for 6804 Extractor/Vial Opener: Adapts 6804 Extractor/Vial Opener for use with Mid-Size vials. Insert attaches to…

For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonateencapsulated steel. Vial set includes one complete vial plus three extra center cylinders. Sample capacity up to 25 mL. Must be used with 6884 and 6886 Adapters.

…source and it will rapidly adapt to that temperature from -150°C to >+100°C. ChillBlock™ tube racks ensure +/- 0.1°C temperature uniformity of all tubes when cooling, freezing or heating. ChillBlock™ Cryogenic Vial Racks are specially designed for Cryogenic vials and are available in four models…

…Mid-Size Grinding Vials: The Extractor/Vial Opener lifts vial sets in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. Lever assists endplug extraction. One 6804 is supplied with each 6870L Accessory Package. Add 6884 Adapter for use with Mid-Size Vials

Grinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.

The HI93754C COD kit contains 25 ready-to-use vials containing pre-measured reagents. These high quality reagents follow follow an adaptation of the dichromate method for COD determination. In this method, a heated digestion is required to oxidize organic matter in the sample. During the digestion,…

…leaks even in pneumatic tubes Can be processed using standard clinical laboratory operating procedures Made from 100% polypropylene Allium™ flock technology - nylon fibers adapt to the direction the swab is being pushed/pulled. Electron beam sterilized to ensure 100% sterility

Product Highlights: Material: Nylon Cloth Label/Tape Size: 0.5 in H x 1 in W x 0.375 in Dia Color: White Printer Compatibility: BMP61, BMP71 (with media adapter), M610, M611, M710 (with media adapter) Recommended Ribbon: M61-R4310 Material Number: B-499 (View Technica

Microscale sublimation adapter for use with 9591-21 Vial and 9592-10 Flask. Supplied with 14/10 inner joint. Hose connection is size A.

…mid-size vials must be purchased separately. Mid-size vials require the 6870M Mid-Size Vial Accessory Package, consisting of one 6884 Mid-Size Vial Adapter for 6804 Extractor/Vial Opener, and one 6886 Mid-Size Vial Adapter for 6800-Series Freezer/Mills®. Small vials require the 6870S Small Vial…

…and 6133 vials. To use 3127 vials in 8000D, 8012 adapter is also necessary. Plastic Vial Clamp Adapter for 8000D: Required when running 8010 adapter with vials 1 in. (25.4 mm) in length (3111, 3114, 3117) or when running 3127 vials with 8011 adapter in the 8000D. Agate Vial Set: For…

Mini stoppering chamber. Attaches to port on freezone freeze dryer (sold separately) to stopper 48 2ml serum vials or 8 30ml serum vials while still under vacuum. Spacers, tubing and adapter for connection included. Vials and stoppers sold separately.

…lid  Centrifugation of 1-2 mL Cryotubes® (max. Ø 13 mm, use with adapter) and screw-cap centrifugation tubes (max. Ø 17 mm, adapter not needed)  Adapters for 12 x 32 mm HPLC vials available (1223J67)  Rotor and adapter are autoclavable (121°C, 20 min)

…diameter double needle adapter for small vials with septum. The blue canister base indicates mixed esters of cellulose membrane. This membrane provides an optimal filtration flow rate for standard products. Application: Steritest(R) NEO Device for liquids in small vials is used for sterility…

MACHEREY-NAGEL glass vials are made from 1st hydrolytic class glass Micro-vials with 0.2–1.2 mL usable volume Adapter required for use in an autosampler Crimp neck vials N 8 available with flat, round or conical bottom, made of clear and amber glass For all vials you can ask for a…

…murine strain C57/BL6J selected for high targeting efficiency and proven germ line transmission. Cells are supplied as 2.5 x 106 ES cells per vial (approximately 2.5 population doublings per passage, shipped frozen on dry ice) and are supplied at passage 12. This ES cell line has been pre-adapted…

…adapter and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from being sucked into the vacuum line. Also, the disposable filter funnels have an 80mm long stem so that the glass vacuum adapter is…