Ace Glass Lab Glassware
-
High performance, low cost, effective in separating low-boiling liquid mixtures with volumes in 0.5 - 5mL range. 2.5" micro-distillation column separates close-boiling mixtures utilizing a PTFE band uniquely driven by an attached magnet. Complete assembly features either 10/10 joints, code -43, or…
-
Gas Reservoir
Ace GlassGas collecting reservoir, described in Microscale Organic Laboratory, Mayo, Pike, Butcher, as a means of collecting and sampling gaseous products when using 9586 Capillary Gas Delivery Tube. Open-bottom tube has single line graduation at 3 and 4mL level and 20-400 thread at top. Supplied with cap…
-
Adapter, 75 degree Angle
Ace GlassWith standard taper inner joints at bottom and side, outlet tube at top.
-
Glass standard taper joint adapters featuring a drip tip and right angle tee ground glass tube sidearms. The sidearms are used to make tube compression fitting connections to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.
-
Duran styled flange without o-ring groove.
-
Adapters, Spherical Joints
Ace GlassA general line of adapters supplied with spherical joints to be used in assemblies for distillation, extraction, or your own requirements. On code -30, please specify capacity and catalog number of item into which the adapter is going to be placed. The
-
Adapter, 75 degree Angle
Ace Glass75 degree adapter, standard taper top joint, standard taper or ball joint bottom and side.
-
This bushing adapter has a male Ace-Thred connection at bottom and a female NPT thread drilled into the center of the top of the bushing. The top FNPT connection matches male Swagelok fittings and facilitates joining plastic or metal tubing to Ace-Thred glass fittings and adapters. This adapter is…
-
Joints, Inner Member, Full Length
Ace GlassStandard taper inner member ground joint for use with outer members listed under Catalog number 7565, 7566, 7567, 7651 and 7652. Can also be used with half joints listed under 7568 and 7585.
-
Adapter, Thermocouple Probe, Kilo Scale
Ace GlassAnti-whip, glass adapter for protecting 1/4in OD probes within kilo scale reactors. Complete unit consists of a heavy, glass sheath topped with a 45/50 standard taper joint with a #25 Ace-Thred, one #25 nylon bushing with a #7 Ace-Thred tap and one #7
-
With standard taper 24/40 joint and 8mm O.D. outlet tube bent at 75 degree angle.
-
Joints, Outer Member, Straight-Sided
Ace GlassO.D. of standard taper joint and tube are approximately same size, allowing for ease in clamping.
-
Thermometer Holder
Ace GlassUsed in various Mini-Lab assemblies to hold standard chemical thermometer.
-
Adapter, Offset, Ace-Thred
Ace GlassThermometer adapter with inner joint at bottom and top threaded piece offset and angled approximately 10 degree for use in multiple neck flasks. Threaded Nylon bushing tightens into glass piece to form an O-Ring compression seal with thermometers, blee
-
Distilling Head
Ace GlassAutomatic, reflux control via solenoid valve arrangement. Reflux control is effected by an adjustable time switch and solenoid takeoff valve. Reflux ratio is a time function and independent of throughput except when a single drop is a significant part of the condensate. Viscous liquids cause no…
-
Adapter, Pouring
Ace GlassConvenient adapter with 24/40 standard joint on end, pour out on the other. For pouring from flasks or funnel without pouring over ground joint.
-
Adapters, Standard Taper Joints
Ace GlassA general line of adapters supplied with inner joints to be used in assemblies for distillation, extraction or your own requirements. On codes -14 and -22, please specify capacity and catalog number of item into which the adapter is to be placed. When
-
-
Glass standard taper joint adapters featuring a drip tip and a vertical ground glass tube sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.
-
Joints - Rodaviss
Ace GlassGlass joint, inner ground with ring on shank for use with threaded outer member or outer member with external thread for use with inner member.O-Ring and cap to form a leak tight-seal. For cap, see 7616; for O-Ring, see 7617.
-
Adapter, Bushing
Ace GlassBushing type adapter for standard taper joints. Smaller outer or female joint is within the larger male joint.
-
Photochem Reactor, Plain & Jacketed
Ace GlassReaction Vessel constructed of borosilicate glass to accommodate the 7854, 7856 or 7857 Immersion Wells. With one 14/20 angled joint for sparger tube, one 24/40 vertical joint for condenser and one #7 Ace-Thred side arm for thermometer. Center joint is 60/40. Bottom of reactor is flat to allow use…
-
Adapter, Kjeidahl Trap
Ace GlassWith 24/40 standard taper joints. Distance between center of joints is approximately 200mm.
-
-
Adapter, Thermometer
Ace GlassAdapter, standard taper joint, 13mm OD center tube with bead,6mm OD tube end side arm.
-
Distilling Apparatus
Ace GlassA compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. Column is vacuum jacketed. The indents are positioned to cause the vapor to follow a spiral path. Approximately three theoretical plates at 60mL/hr. Hold up to 1.2mL operating, 0.5mL static.…
-
Distilling Apparatus
Ace GlassA compact fractionation unit for distilling small quantities in a vacuum, and for ordinary separation. The indents are positioned to cause the vapor to follow a spiral path, adding to the efficiency of the unit. By use of the three-way stopcock, a manifold arrangement is achieved, making it…
-
Adapter, pH Probe Tube, Pilot Plant
Ace GlasspH probe adapter tube extends the probe deep within large capacity flasks. Fits in 45/50 opening on head and is vertically adjustable along its length. Available with either Chemraz or Fetfe o-rings and in 24 in(61cm), 36 in (91cm), or 48 in (122cm) le
-
Adapter, Claisen, #7 Ace-Thred
Ace GlassWith 24/40 standard taper joints and top side arm with #7 Ace-Thred for use with 5029 Nylon bushing and adjustable length thermometer. Supplied complete with 5029-10 Nylon bushing and FETFE O-Ring.
-
Schlenck Filter Tube, NO-AIR
Ace GlassSchlenk filter tube with an integral glass filter disc at the tube's mid-line and featuring inner joints at top and bottom.
-
Adapter, Claisen
Ace GlassAdapter with parallel side arm, outer joints at top, inner joint at bottom.
-
Reflux Apparatus, Continuous, Fuchs
Ace GlassContinuous reflux apparatus keeps solvents pure and free of oxygen. Compact, upright design allows multiple units to be assembled in small areas. Distillation column is 250mm long, vacuum jacketed, unsilvered. Allihn condenser is 250mm. Adapter at top has two hose connections for maintaining inert…