Spherical Joint

Compare Tool

Select up to 3 products

Spherical Joint
1 - 32 of 92
Sort
View
Show
  • A general line of adapters supplied with spherical joints to be used in assemblies for distillation, extraction, or your own requirements. On code -30, please specify capacity and catalog number of item into which the adapter is going to be placed. The

  • Made to ASTM Specifications E677.

  • Made to ASTM Specifications E677.

  • …with hinged screw and knurled head nut, are provided at the mouth of the forked jaws to lock the clamp securely in position. Size number indicates the diameter in millimeters of the ball over which the clamp fits, and corresponds to numerator of Spherical Joint for which clamp is intended.

  • Vacuum Trap Kit with Spherical Joints. Includes trap body, top adapter, middle adapter, bottom adapter, and clamps. Body OD: 50mm, Body Length: 360mm

  • …using MEDIUM WALL tubing. Glass wool (not supplied) is used to support column packing. Can be used with optional CG-1201 flow controller and CG-1200 reservoir. Connections between the column, reservoir and flow control adapter are spherical joints connected with CG-150 stainless steel clamps.

  • Reservoir for use with CG-1199 and CG-1200 columns. Reservoir has a top 35/20 socket joint for use with CG-1201 flow control adapter and the listed size lower ball joint.

  • U.S. patent #2,388,633 fabricated from aluminum. This type clamp affords a positive, uniform clamping pressure.

  • For use with CG-122, o-ring ball joint to provide for a flexible high vacuum seal. Polished sealing surface does not abrade o-ring. Note: Not for use with CG-120 ground ball joints.

  • Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints. Supplied complete with one Viton o-ring of the listed size.

  • Joints, Spherical

    Ace Glass

    Full length, standard wall. U.S. Reissue Patent No. 22181. These famous ACE spherical joints are precision ground and vacuum leak-tested for fit and interchangeability. Available in both ball and socket members.

  • Round bottom flasks, three vertical necks, spherical outer joints. Available in standard and heavy wall.

  • …chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top spherical socket joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Joint: SJ 35/20 Note: since the chromatography column is used with positive air pressure, it's…

  • General purpose column having a PTFE stopcock, reservoir of the listed capacity and a top spherical socket joint. Glass wool (not supplied) is used to support the column packing. Column is constructed using MEDIUM WALL TUBING. Can be used as a gravity eluted column or a flash column (as described by…

  • Transition adapter to convert a spherical ball or socket 2 joint to a standard taper inner joint.

  • Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap® metering plug.

  • Special S-40 size ball and sockets compatible with Buchi rotary evaporator components. Both the ball and socket are tooled on Duran 34 mm O.D. x 2.8mm wall tubing.

  • Arsine Generator with Clear-Seal™ Joint

    DWK Life Sciences (Wheaton)

    …specifications Arsine absorber (1140L18) has a socket joint Scrubber tube (1140L22) has a standard taper 24/40 Clear-Seal™ joint and a spherical 12/2 ball joint held together by a size 12 stainless steel ball joint clamp Manufactured from WHEATON 33 low extractable borosilicate…

  • …Epoxy Coated. Reservoir connects between column and flow control adap-ter. Joints on column, reservoir and adapter are 35/20, 50/30 or 75/50. Columns available with or without Por. B (70-100m) sealed-in fritted disc. Joint clamp also available. Complete item consists of column, reservoir, flow…

  • Used in place of lubricant for average laboratory use not intended for high vacuum use unless cemented to glass with ACE 7560 epoxy adhesive. Rugged approximately .38mm (.015") wall thickness.

  • Round bottom, HEAVY WALL single short neck flask with a spherical socket joint. Flasks having a 35/20 socket joint are used as replacements for the collection flask on rotary evaporators.

  • …is constructed using MEDIUM WALL tubing. Can be used with optional CG-1201 flow controller and CG-1200 reservoir. Lower end of the column has a round bottom. Connections between the column, reservoir and flow control adapter are spherical joints connected with CG-150 stainless steel pinchclamps.

  • Angle adapter with 105 degree standard taper or spherical joint at top and bottom.

  • …with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top spherical socket joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Joint: SJ 35/20 Note: since the chromatography column is used with positive air pressure,…

  • …PTFE stopcock and a top spherical socket joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent re-mixing of components that are already seperated. Joint: SJ 35/20 Note: since the…

  • …a PTFE stopcock and a top spherical socket joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent re-mixing of components that are already seperated. Joint: SJ 35/20 Note: since the…

  • …porosity fritted disc sealed into the lower end of the column for packing support. Column is constructed using MEDIUM WALL tubing. Can be used with CG-1201 flow controller. Connection between the column and flow control adapter are spherical joints connected with CG-150 stainless steel clamps.

  • Round bottom, HEAVY WALL single short neck flask for use on rotary evaporators for receiving distillate. Joint at the top of the flask is a 35/25 socket. Plastic Coated to prevent injury from broken glass while preventing spillage of hazardous materials.

  • Clear fused quartz socket joint. For clamps see CG-150.

  • Spherical capillary joints.

  • Full length, heavy wall. U.S. Reissue Patent No. 22181. These famous ACE spherical joints are precision ground and vacuum leak-tested for fit and interchangeability. Available in both ball and socket members.

  • For use with PTFE sleeves; ground slightly undersize so that with 7556 sleeves in place, joint conforms to standard dimensions.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.