Compare Tool

Select up to 3 products

1 - 32 of 839
  • Heavy wall pressure vessels have an internal thread for use with PTFE bushings as pressure seals. The unique design allows hand tightening and loosing for easy access into the vessel. O-ring is positioned on the bushing above the thread for improved sealing. Vessels are useful for pressure…

  • Porous discs for use in fabrication of special glass apparatus. Available in F, M, C and XC porosities. Pressure Limits: Fritted glassware is designed for low pressure vacuum filtration or gas flow. The MAX differential pressure should not exceed 15 PSI. Thermal Limits: Fritted glassware…

  • Drying samples for elemental analysis. Sample is placed in a vial which is placed into drying chamber. Under vacuum and gentle heat created by refluxing in outer jacket of low boiling point solvents.

  • Pyrex® or Duran® borosilicate plate glass. The 1/16in, 1/8in and 1/4in thick plates have edges that are cut and swiped. The 1/2in thick and over have ground edges.

  • Glass standard taper and spherical joint adapters featuring a vertical ground glass sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • Glass standard taper and spherical joint adapters featuring right angle tee ground glass sidearms. The sidearms are used to make tube compression fitting connections to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • Premium quality stainless steel KF/NW25 4-way cross flange for secure vacuum connection. Now you can hook up multiply vacuum ovens to one pump, or multiply pumps to one oven to draw a faster and deeper vacuum.

  • Glass standard taper and spherical joint adapters featuring a right angle ground glass sidearm. The sidearm is used to make tube compression fitting connection to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

  • Jacketed filter reactor systems with all you need to perform single or multi-step reactions and filtrations in the same vessel. Systems with Ace-Thred heads are pressure rated to 35 psi at 100 degrees C. System sizes vary from 150ml to 6000ml with 60mm

  • Adapters, Bushing


    Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.

  • Tube is designed for the collection and storage of gas samples. The 125mL has a sidearm O.D. of 9mm, the 250 and 500ml have a sidearm O.D. of 13mm, but with the addition of a syringe sampling port for use with a CG-3022-05 or CG-3022-22 septa. Supplied complete with one CG-3022-05 red rubber septa.

  • Septa, Rubber

    Ace Glass

    Septa tops are flanged with a sleeve-like extension that folds down over the vessel's neck. Punctured diaphragm re-seals after syringe is withdrawn. Septa are supplied in a variety of sizes, red, white or grey rubber.

  • SYNTHWARE Dessicant Flask

    Kemtech America

    Dessicant Flask, Joint: 34/45, with 2mm bore PTFE stopcock.

  • Adapters for use with AF-0060 thru AF-0062 vacuum manifolds that permit the manifold to be utilized with a multitude of standard glassware or tubing products. The AF-0070 adapters are to be used with either a Cajon® fitting on the main ports or at the ends of the manifold with heavy wall rubber…

  • Porous fused quartz discs. Porosity sizes are as listed and differ from porosities of borosilicate discs.

  • Full or medium length standard taper inner joint having a drip tip. Joints are available uncut or with the drip tip being cut at a 45° angle. Tooled on the same tubing sizes as the CG-100 inner joints.

  • Used for drying air-sensitive compounds with inert gas or a simple pressure filter funnel. O-Ring joint connects cap to body to give a larger opening. Funnel will withstand pressures of 20psi as supplied but NO warranty, expressed or implied. Cap adapt

  • Adapter, Pouring

    Ace Glass

    Convenient adapter with 24/40 standard joint on end, pour out on the other. For pouring from flasks or funnel without pouring over ground joint.

  • Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.

  • Vigreux style column with indentations that run the entire length of the column for improved vapor-liquid contact. Column length refers to the effective length, measured from the lowest to highest indent in the column. Column has a top outer and lower inner standard taper joint.

  • Adapter, Reducing

    Ace Glass

    Connecting, reducing adapter with top female joint being smaller than the bottom male joint.

  • Standard Taper ground Inner Joint, Full Length.

  • KIMAX Brand Glass Stirring Rods

    DWK Life Sciences (Kimble)

    With both ends rounded Designed from Federal Specification NNN-R-560, Type 1 Length x diameter in mm are shown in listings

  • Glass Beads, Borosilicate, Soda Lime

    DWK Life Sciences (Kimble)

    Solid Borosilicate (5663F29 to F47) With diameters selected within a tolerance of ±0.5 mm Kimax brand specific gravity is 2.23 Soda Lime Glass (5663L13 - L31) Made of soda lime glass, specific gravity is 2.49, approximately spherical In 1 lb. packages …

  • Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.

  • Bushing connector for joining an Ace-Thred to a reduced end tube. Assorted bushing and o-ring materials.

  • The Morris NMR tube cleaner is an inexpensive, durable apparatus which will clean 5 or 10mm NMR tubes with as little as 10mL of solvent in one easy operation. Cleaner does not require a stopper on the NMR tube and does not have a fragile side arm. Complete item is supplied with a NMR tube washer,…

  • Fabricated from 18-8 type Stainless Steel No. 303 free machining. Inside diameter the same as our glass joints, 7655, and are fully interchangeable. Can also be supplied from other metals, made to order. Shanks are machined for thread sizes listed, and are available not threaded or machined with…

  • Borosil® Polished Glass Solid Stirring Rods are constructed from smooth, low-expansion, low-extractable borosilicate glass. Their mechanical strength, excellent heat resistance, and outstanding chemical compatibility make them the perfect general use stirrer. Borosil® Glass Stirrers…

  • Process pipe reducer elbow.

  • Made to ASTM Specifications E677.

  • Standard taper ground inner joint, medium length.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.