With heavy, rectangular base of plate steel, finished in hard enamel Zinc-plated steel rod is machined at lower end with U.S. National coarse thread 508 mm rod is 9.5 mm in diameter with 3/8-16 thread; 610 and 914 mm, 13 mm in diameter with 1/2-13 thread 8835B50 support is furnished…

This clamp features plastic coverd spring jaws. Accepts burettes up to 35mm OD, and support rods up to 0.5" OD. Available as a single or double burette clamp.

The Universal H-Stand ensures stability and compatibility with all VELP Overhead Stirrers. It is possible to adjust the stand in order to adapt it to an uneven surface.

Jumbo sized clamp holder Fits rods 5mm-20mm in diameter Metal thumb screws with grip allows for easy adjustment Universal Clamp Holder, Jumbo Sized - Holds Rods up 20mm in Diameter (1) Clamp This universal clamp holder, made of durable metal, holds 2 rods perpendicular to one another.…

This silicone flask stand can support round bottom flasks as large as 2000 mL, as well as other items like beakers and dishes. The stand has 12 molded-in steps to provide a secure grip for a wide range of flasks. The silicone material that is heat resistant to 250° C. Flask stand…

Expand your options in the laboratory Even distribution rods for maximum capacity of items Extended polypropylene base allows for extra items to be added Rigid, solid aluminum rods provide extra support for small lightweight items such as glassware as well as heavy items such as…

Double Burrete Clamp Support with Rod and Stand. Alloy jaws are suitable for all burettes up to 100mL. Cast iron blue base measuring 7" wide and 13" long. 12mm diameter stainless steel support rod measuring 24" long. Great for any science or home laboratory. Double Burrete Clamp Support with…

Features:  S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability.  Supports TWO Reactors side by side from 300mL to 5L.  Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically…

Support rings with clamp, steel rod.

CLAMPS, CHAIN, 12IN EXTENSION, Similar to the CG-9220-01 except has a 12" long arm. Clamp can accommodate up to 6-1/2” (170mm) O.D. respectively. Quick slip-on chain connection has large, easy-to-turn adjusting knob. Grip is vinyl coated. VALVES, CHEM-VAC, HIGH VACUUM, LOW HOLD UP,…

A Standard Taper clamp made of corrosion-free stainless spring wire.

Our nickel-plated spring-steel Mohr's pinch clamps are offered in two varieties - one that can clamp tubes up to 13mm in diameter and one that can fit tubes up to 19mm in diameter. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are…

Accommodates (1/2") rod. Locked with 14"-20 hex screws.

Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 1/4"-20 hex screws. Non ferrous…

Our polypropylene Separatory Funnel Holder accepts support rods between 9.5mm and 12.5mm in diameter. These holders can support separatory funnels as small as 250ml and as large as 2000ml. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not…

Use these adjustable "rubber bands" for bundling, binding, color coding, securing columns and burettes, controlling flexible tubing, keeping foil covers on canisters, and securing dialysis or biohazard bags. Remain flexible from -46°C to 121°C (-50°F to 250°F); use…

Horseshoe-base laboratory stand with 11/16 (17mm) diameter stainless steel mast. Accepts containers up to 9" (229mm) diameter. Designed for durability, these lab stands are designed for the lab bench

Corrosion resistant. Has precise fit and powerful holding ability. Clamps at a 90 degree angle. Legal Information: LabJaws is a trademark of Henry Troemner LLC

The Humboldt Mfg. Co round jaw extension clamp is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage.

LabJaws flow control devices offer selection and quality. They are finely machined to deliver accurate regulation or interruption of fluid flow. Every flow control device resists corrosion and rust. Hosecocks offer easy one-hand operation. Convex bearing surfaces and rounded edges protect tubing.…

Features 3/4" S.S. Pipe (1.050" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability All S.S. Uprights are Passivated to Inhibit Corrosion Adjustable S.S. Shelf/Tray Supports Reactors from 250mL to 5L Single…

The "Hoffman Type" Electrolytic Support is used with associated glassware to demonstrate the electrolytic decomposition of water, hydrochloric acid, and other solutions. The unit consists of a cast iron base (H-21225) with insulated binding posts, support rod (H-21360), one burette clamp (H-8022),…

Stainless steel spring used to connect apparatus having hooks. All springs have an enlarged 1/4" ID loop at each end for easy connection to almost any size hook. Diameter of the coils on all sizes is 0.190". Length listed is the length between the loops.

These Rod Clamps are otherwise known as the "muff" portion only and can be used to create custom clamps to satisfy a wide range clamping applications.

Rugged stainless steel deck and lift mechanism for long life in corrosive environments Ideal for use in fume hoods, solution-baths, marine and industrial laboratories Support miniflasks, jars, columns, large baths, magnetic stirrers, heaters and more Resistant to sanitizing…

The support feet are of non-ferrous alloy, two inches in diameter, 16mm high, with set screw for fastening lattice frame rods. Provided without mounting screws. Foot has four holes for attaching to bench, floor or wall.

The Chemglass standard taper joint clamp is mainly used for supporting flasks, beakers or burettes while conducting experiments. It is made of sturdy PTFE material which ensures durability and long lasting usage. It is color coded for easy identification.

Extend the length of your lab frame rods. This strong, corrosion-resistant aluminum alloy connector permits end-to-end joining of 12.7 mm (1/2") rods in diameter. Precision machining ensures rod alignment. Comes with two set screws for adjustment.

Corning offers a stainless steel, two piece, 18" (45.7cm) support rod with a 5/16" (0.8cm) diameter that consists of two 9" rods that screw together. It screws into the base of Corning hot plate and stirrer models PC-400/410/420, PC-400D/410D/420D and PC-600D/610D/620D.

Nylon Open type connector for 1/2" Rods with hex head bolt Corrosion-resistant; they will not corrode or rust Accommodates (1/2") rod Locked with nylon hex head bolt

Stainless steel electro-polished finish or nickel-plated zinc construction. Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress the scissor-like mechanism, insert buret and gently release to grip. Numbers and graduation on buret remain easy to read. For height…

Made entirely of electropolished stainless steel for excellent chemical resistance and strength. Round extension arms allow the clamps to be rotated 360°. Extension arms allow placement of apparatus at various distances from lab frames. Supplied with vinyl and fiberglass prong covers for high…