Burette Clamps

Two prong zinc-plated, stamped steel with aluminum alloy holder is adjustable by checknut to any angle Takes objects from 3/8” to 1 3/8” diameter. Fits rods up to 1/2” diameter. Length: 6 3/8”.

This clamp features plastic coverd spring jaws. Accepts burettes up to 35mm OD, and support rods up to 0.5" OD. Available as a single or double burette clamp.

This sinc plated stamped steel burette clamp has a steel thumbscrew and can be used with rods up to 3/4" in diameter. The distance between the two burettes is 7.25"

Excellent for holding small objects, The jaws on these burette clamps open from 15mm to 45mm (0.5" to 1.75"). The clamp attaches to rods up to 13mm (0.5"). O.D. Jaws can be rotated and locked at any angle. Available with the jaws coated or uncoated.

The clamp holds a burette securely while allowing full view of the burette graduations. The clamp accepts rods from 1/4" to 1/2" in diameter. The clamp has an enamel finish with rubber coated grips to prevent slippage.

These clamps are molded in polypropylene, making them completely corrosion proof. The spring loaded jack in the middle provides a vice-like grip to the burette and prevents in from slipping. Two tapered wedges are provided to ensure firm grip on the rods having diameter 0.5" or3/8".…

Cast aluminum clamp with nickel plated steel thumb-screw. The clamps jaws have a range of 3/8" x 1-3/8".

A zinc plated, stamped steel clamp with steel thumb screws. Will accept rods up to 3/4" in diameter. The distance between the position of the burettes is 7.25".

Graduations are always visible The clamps fit standard support rods, 12.5mm (1/2") and includes an adapter to fit to narrower 9.5mm (3/8") rods. Polypropylene is chemical resistant and autoclavable at 121°C (250°F).

…5/8" (16mm) support rods or smaller, this stamped steel clamp is plated for corrosion resistance and has a steel thumbscrew. The clamp is 9" (229mm)long by 3" (76mm) wide with a center distance 7-1/4" (184mm) between burettes. The unit is designed for use with burettes from 6mm to 16mm in diameter.

The arms of the clamp will rotate 360 degrees and can be locked in place. Cast iron construction with rubber coated jaws to prevent slipping. The clamps will accept a tube range of 3/8" to 1-3/8" in diameter.

Clamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes.  The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs.  For use with rods up to 19mm diameter.

Borosilicate Glass Graduated Burette, subdivided at 1ml. Reinforced opening to accept the burette tip assembly. Capillary Glass tip with ground ends. Used with Mohr's Burettes. Mohr's clamp, rubber tubing, and glass burette tip. The assembly is used on Mohr's Burette.

Our deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…

Features a 4-prong die-cast clamp attached to a chrome-plated steel rod. Jaws are lined with cork. Overall length is 8".

Product Dimensions (l x w x h) : 8.5x1.599x5.187in These spring loaded polypropylene clamps allow a clear  view of the graduations over the entire length of  a burette. The arms are fitted with rubber grips  to prevent slipping and the central boss features  of a conical…

…experiments. Includes: 500ml Round Bottom Borosilicate Flask with Side Tube 300mm Graham Condenser 250ml Erlenmeyer Flask Glass Stopper Support Stand (6"X9") with 24" Rod Swivel Burette Clamp Extension Clamp Clamp Holder Instruction Manual

…associated glassware to demonstrate the electrolytic decomposition of water, hydrochloric acid, and other solutions. The unit consists of a cast iron base (H-21225) with insulated binding posts, support rod (H-21360), one burette clamp (H-8022), and one clamp (H-21430). Glassware is not included.

…are 14mm OD x 150mm length and are graduated to 14mm. The collecting tubes are fitted with a pair of high quality Platinum Electrodes, #501-2. The Electrolysis unit is supported on a cast iron stand and attached with a burette clamp. Everything listed is supplied including an instruction manual.

…autoclavable bosshead securely clamps rods up to 13mm (1/2 inch) diameter at 90° angles to one another. Adjust by hand with large flat wing head screws. Chemical and corrosion resistant. Spring action burette clamp features rubber coated jaws that grip burettes or similar lab items with…

…research grade components Includes: (1) base, (1) rod, (1) beaker tong, (1) crucible tong, (1) tripod stand, (1) wire gauge, (1) boss head, (1) clamp, (1) retort ring with boss head, (1) burette clamp double, (1) test tube holder, (1) test tube stand (z-shape), (1) test tube brush- spatula

…power source. The stand is supplied with a single and double burette clamp to support the Glass Collecting Tube and Reservoir Tube. Instructions provided. Electrolysis Hoffman, Glass Parts Only The glass "H" shaped burettes made of borosilicate glass and has ground glass stopcocks at…

…- 2 Burette Brush - 1 Burette Clamp, Double - 1 Clamp Boss Head - 1 Clay Pipe Triangle, 2" - 1 Crucible Tong Plated 9" - 1 Electrodes, Carbon Rods - 2 Metric Ruler, Plastic 30 cm - 1 Nichrome Wire w/ Aluminum Handle - 1 Pencil, Glass Marking, Blue - 1 Pinch Clamp Mohrs…

…Beaker, Glass, 100ml (1), Beaker, Glass, 250ml (1), Beaker, Glass, 400ml (1), Beaker, Glass, 1000ml (1), Bottle, Wash, 125ml, Plastic (1), Clamp, Burette (1), Clamp, Mohr's Pinchcock (1), Crucible with Cover, 10ml (1), Cylinder, Graduated, Glass, 10ml (1), Cylinder, Graduated, Glass, 50ml (1),…

Heavy porcelain bases with glazed finish to prevent chemicals from seeping into the base. Base includes rubber feet to ensure the base does not slide or damage bench surface. Hole for rod is located in the center of the base. Includes a removable aluminum support rod. Stainless steel support rod is…

Use these adjustable "rubber bands" for bundling, binding, color coding, securing columns and burettes, controlling flexible tubing, keeping foil covers on canisters, and securing dialysis or biohazard bags. Remain flexible from -46°C to 121°C (-50°F to 250°F); use in the autoclave…

…2.0 m. Thomas No. 1165W41 Stop pin for titration clamp, for TITRONIC® 500, TitroLine® 6000, TitroLine® 7000, TitroLine® 7750 and  TitroLine® 7500 KF. Thomas No. 1165W42 Titration clamp, for TITRONIC® 300/500, TitroLine® 5000/6000, TitroLine®…