Widely used and referenced in laboratory protocols      Dual position snap-cap prevents sample loss with ease of handling      Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile)   The foundation for consistent research…

Non-sterile, precision molded, round bottom test tubes for general purpose laboratory work Polypropylene tubes are more chemically resistant than polystyrene and are appropriate for use with organic solvents and stronger acids (except oxidizing acids), alkalis, alcohols, chlorinated &…

Safety Caps   Color-coded; helps prevent cross-contamination and ensure sample integrity Sizes 10, 12, 13, and 16 mm fit all varieties of test, blood collecting and culture tubes Can be used to recap Vacutainer®  after the original rubber stopper is removed Cap…

Widely used and referenced in laboratory protocols      Dual position snap-cap prevents sample loss with ease of handling      Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile)   The foundation for consistent research…

Foam plugs for all size test tubes and laboratory flasks Identi-Plugs® are for use with test tubes and flasks. They are reusable and leave no clinging fibers like cotton plugs. They provide a snug fit, yet permit free air flow. Plugs are ideal for use with Drosophila vials. They spring…

These Nessler tubes are ideal for color comparison. Shadowless bottom of each tube transmits undistorted light Rings and legend are durable white ceramic enamel 45310A series is supplied in matched sets of 6 Graduated ring scale of any of the six tubes will not vary by more than 3…

Premium 15 mL and 50 mL conical tubes manufactured from high-clarity polypropylene. Features dark imprinted graduations and a large white writing area for sample identification. Flat polyethylene cap also provides another opportunity for labeling. Available in sterile bulk and racked…

An extensive line for multi-use test tubes. They are molded from premium grade polystyrene for clarity of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000…

Thermal Cycler 0.2 mL Tubes feature attached caps for convenient one-handed use. Slender shape distributes uniform heat. Polypropylene tubes are EtO sterilized. Microcentrifuge 0.5 mL Tubes have a frosted writing area and reliable snap cap. Made of autoclavable polypropylene, these…

For testing ammonia nitrogen “Shadowless” bottom eliminates dark spots caused by distortion of transmitted light. Made of glass specially formulated to be as free of color as possible. Marks have fused-in white filler. Package of six tubes.

These Nessler tubes are ideal for color comparison and feature cap style stoppers that do not need to be removed to take readings. Shadowless bottom of each tube transmits undistorted light Standard Taper cap style stopper Replacement cap is 15182 (3058L93 & 3058L98) 3058K65 is…

This 12 x 75mm polypropylene test tube has a capacity of 5ml Tube features a round bottom and is autoclavable Sold as a pack of 100 tubes

Bottom pad prevents chipping and breaking of pipette tips. All components can and will withstand repeated dry or steam heat serialization. Specifications: Canister Only and Complete w/ Silicone Pad and Closure Available Type 1 Class A Borosilicate Glass Made For  Pasteur Pipettes and…

Excellent choice for general laboratory use Plain top, beaded rim Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

These PYREX® ignition tubes are made from No. 7740 glass and are satisfactory for most applications encountered in school work where temperatures above 600°C are not required. These rimless tubes perform well when continually used at temperatures up to 500°C, or for short periods to 600°C.

Ace Glass pressure tubes are the premier glass pressure tubes in the world, rated at 150 psig at 120 degrees C. Featuring a #7 Ace-Thred sample port, these tubes offer the convenience of sampling while remaining connected to the researcher's apparatus. Due to varying conditions, Ace cannot…

Constructed of polypropylene Baskets hold test tubes, centrifuge tubes and bottles Designed for autoclaving, washing and incubating Each basket comes with a permanently attached lid. Tapered sides allow baskets of the same size to nest for storage. Slotted to allow complete drainage and…

Perform critical cellular applications with Thermo Scientific™ Nunc™ 14mL Round-Bottom Tubes. Features: Optimized gas exchange with dual position vent/close cap Off-gas volatile organic compounds easily with breathable packaging Certificates of conformity available…

Transport tubes and vials are designed for the safe storage and transport of biological materials. The transparent polypropylene (PP) vials allow unobstructed viewing of the sample. The vials are shatter-proof and may be exposed to freezing temperatures. They feature leak-resistant screw caps that…

As supplied with 9212K21 series test tubes, with Teflon over-liner Cap size shown is GPI thread-finish

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes from 13 to 38 mm Same evaporation and sterility characterisitcs as…

0.5, 1.5, and 2.0ml screw cap vials molded from high precision mold and high purity resin. Screw caps deliver leak-proof seal for all types of contents, ideal for life science reagent or solution. All vials are available in skirted and conical interiors to allow full recovery of samples stored.…

Clear polystyrene, treated to ensure a high and uniform binding of proteins and immunoglobulins For solid-phase assay techniques such as RIA and ELISA Other specifications are the same as tabulated for 9220B25

Borosilicate glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. The 6 x 50 mm size is often referred to as a “Durham tube” No marking spot Designed from ASTM Specification E982, Type IV requirements …

Aluminum test tube baskets that offer years of rust-free service. They are manufactured from expanded aluminum and are hand riveted together. Finished with aluminum strip bands, they offer heavy-duty construction and durability, yet are light in weight. Products are manufactured in the USA …

1.5ml Microtube, 1000/Bag, 10 Bags/Case.

Size 75 x 12 mm Of clear polystyrene Total volume 5 mL Working volume 4.0 mL Tube is packaged under aseptic conditions in sleeves of 100, 30 sleeves to a case. Without stopper; see Thomas number 9219R30 for stopper.

LVL Technologies products are intended for sale/shipment within North America, South America, and the Carribean only. All other International customers should contact their local LVL Technologies distributor to place orders for LVL Technologies products.

Used for IRMA, ELISA and ILMA techniques Capacity 5 mL; 12 mm od x 75 mm length MaxiSorp surface has excellent affinity to immunoglobulins and other proteins Star-shaped fins are molded in the bottom of the tube, which provide more surface for binding and increase mixing…

Size 100 x 15 mm Of clear polystyrene Total volume 12 mL Working volume 10 mL Tube is radiation sterilized and includes plug-seal, polyethylene stopper; packaged in sleeves of 100, five sleeves to a case.

Labcon SuperClear® cap and integral molded elastomeric seal Includes molded graduations and writing surface ATP, RNase/DNase and Endotoxin Free (non-pyrogenic) IATA 95kPa certified to conform with USDOT HMR, 49 C.F.R., Parts 171-180 and IATA DGR UN3373 PI650 mailing tube…

Designed for safety Available in standard red or blue tip Tubes are wrapped in multiple layers of clear Mylar plastic to help avoid accidental breakage. The Mylar wrap helps to contain the sample if the tube fractures, inside or outside the centrifuge. Chance of contamination due to…