These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

Transport Tubes Tube is polypropylene (PP) - Screw cap is Polyethylene (PE) Tube is self-standing with conical bottom Molded graduations Clear: 1224L57-L58 Amber: 1224L59 Dimensions: 16mm x 56mm (1224L57) Dimensions: 16mm x 92mm (1224L58-L59) Universal Tubes …

These premium quality tubes feature sturdy, uniform bottoms and consistent lengths. The 10x75 and 12x75mm sizes are suitable for cell washing procedures. Amber premium quality tubes are produced from amber borosilicate glass to give superior protection for light sensitive applications. …

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

These PYREX® flat bottom reusable culture tubes are ideal for plant tissue culture and general culture work. The flat bottom facilitates use with agar slants. Walls and bottoms are of uniform thickness. The tubes are rimless for greater convenience in plugging and rack storage. Optional…

Single use culture tubes are housed in easy-to-open, easy-to-use packaging. The three small sizes come in a dispenser arrangement while the larger sizes are bulk-packed. Culture tubes are made of borosilicate glass to reduce pH changes and contaminants that could potentially leach from…

Same as the 9210E23 series, but caps have Teflon ® overliner bonded to the rubber liner Listings indicate tube length x o.d. in mm

With lip Tubes 10 mm through 18 mm o.d. have marking spot. Listings indicate length x o.d. in mm.

These reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.

KIMBLE CHASE micro-hematocrit tubes are used to measure t he vo lume percentage of red blood cells in blood.   ·          Packed in plastic vials with reclosable snap-lock caps to maintain cleanliness ·…

Horizontal pack     Soda-lime glass, with Neutrex® interior surface treated to produce low surface alkali, conforming to USP XX and NF XV (1980), p. 949, Type II glass.     Packed horizontally in shallow trays. Case contains 4 trays of 250…

Dimensions shown are length x o.d. in mm.

Variety of culture tubes from 1ml to 25ml

Made from KIMAX KG-33 glass tubing Round bottom and slightly constricted neck with Standard Taper solid ground glass stoppers Tubes have a sand-blasted spot for marking 100 x 13 mm size test tubes include No. 9 Standard Taper stopper; 150 x 16 and 150 x 19, No. 13; 175 x 22 and 200 x…

Gamma radiation sterilized, Polystyrene or polypropylene construction, Leakproof caps Sterile culture tubes are precision molded from premium-grade, chemically inert plastic materials: polystyrene (PS) for clarity and polypropylene (PP) for toughness and chemical resistance. Polypropylene…

Globe Scientific offers an extensive line of mulit-use test tubes. They are molded from premium grade polystyrene for clarity or of polypropylene for impact strength and stability to common acids, alkalies, and solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene…

Fabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50 mL .

Suitable for tissue culture and general bacteriological use Provided with marking spot which also serves for orientation Caps are not included with tubes and must be purchased separately Packaged in styrofoam trays 9215D32 tube takes size 13-415 cap and is sold in cases containing…

With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

Globe's plastic culture tubes are produced in polystyrene (PS) or polypropylen (PP). The dual position snap cap (LDPE) provides either aerobic or anaerobic storage of samples. Note: Leave the dual position snap cap in the loose position for aerobic work and in the sealed position for…

Hygiene monitoring test kit for industrial applications For hard to reach places/surfaces, viscous liquids, semi-solids, and powders: Remove swab from diluent vial, and swab sample area. Return swab to vial and mix well. Wide Range of Industrial applications Food & beverages …

Reusable PYREX rimless culture tubes offer greater convenience in plugging and rack storage. Ends are fire-polished. The 22 and 25mm o.d. tubes do not have marking spots.

Round bottom, with threaded neck; without marking spot Size 100 x 13 mm takes size 13-415 cap; other sizes take size 15-415 cap Cap is not supplied and must be purchased separately; see 9215F70 series Cases of 1,000 contain 4 packages of 250. Listings indicate length x o.d. in mm.

MicroTube Rack System™ for sample collection, assay, and short or long term storage 0.65, 1.1 and 2.2mL tubes and variety of capping options are available Cost effective Deep-well plate alternative, with removable wells Now available in familiar single pack format

Made of polystyrene or polypropylene These disposable sterile tubes can be used for most routine laboratory procedures. They are biologically inert and exempt from mold release agents. Precision molding with virgin thermoplastics ensures that our tubes will be uniform in size and shape. High…

Polypropylene or polystyrene Standard sizes Sterile or non-sterile Available with or without snap cap Thomas Culture Tubes can be used for almost any laboratory procedure. They are chemically free and biologically inert. These tubes are precision molded from premium grade materials and checked…

Tubes are suitable for tissue culture work and general bacteriological use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular…

Beaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.

The stainless steel cylindrical closures are excellent for microbiology and related applications. Non-contaminating closures may be autoclaved repeatedly without loss of resilience. The indentations on the top surface permit adequate exchange of gasses under aerobic and anaerobic conditions, yet…

Tubes with round bottoms are manufactured from ASTM E438 Type 1 Class A Borosilicate 3.3 glass. Includes polypropylene autoclavable screw cap with PTFE liner.

TriForest Lexan® Polycarbonate (PC) culture tubes are optically clear, durable and a safer alternative to glass. They are ideal for production of terminally sterilized products. The tubes are flat bottom and ideal for large scale production culture media, using automated or manual filling…