Color-coded clamps hold standard taper joints securely under moderate pressure Molded from polyoxymethylene (POM), an acetal resin Will not scratch glass and can withstand temperatures up to 150°C Resistant to bases and weak acids Not resistant to halogen gases and concentrated acids

Easy-Click closure - stop-it can be opened and closed in any position - without tiresome screwing on and off. High quality material - stop-it made from the heat resistant and chemical resistant plastic PVDF. The clamp is galvanised steel. The hose clip can be used wherever the flow in hoses…

Corrosion resistant. The hook allows for one-handed assembly of two components with one adjustment screw. Legal Information: LabJaws is a trademark of Henry Troemner LLC

Aluminum alloy clamp Metal clamping screws Includes: (1) Boss head For use with laboratory stands, this popular boss head is made of die casted alloy with a powder coat finish. It accepts rods at a right angle to one another. Metal thumbscrews allow for adjustment.  

Set includes retort base, rod, support ring and 4-pronged cork-lined clamp and bosshead Upgraded design now includes a two-piece stainless steel rod that effortlessly screws together, ensuring easy setup and enabling more compact storage when not in use The 8"L x 5"W base weighs 1.75lbs,…

The Sidewinder is a unique ratcheting pinch clamp for precise fluid flow regulation.  The innovative design allows for quick and easy installation on any tubing assembly, while eliminating the need to install on tubing prior to adding fittings and end connectors.  The holes in the clamp…

Heavy cast iron triangular bases with black enamel finish include a zinc plated steel rod.

Molded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10,000ml capacity. This stackable flask stand can also be autoclaved.

Ai stainless steel laboratory scissor jacks with cushion feet.

Cast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable.

Lab Jack Features: Only support jack on the market that attaches directly to a 1/2" diameter vertical lab frame or lattice rod. Heavy gauge aluminum construction provides excellent rigidity and support. Fabricated to precise tolerances allowing smooth vertical adjustment. …

The Clamp Hook locks into any position to support suspended thermometers, drying tubes and potash bulbs. The unit has an easy-adjusting check nut and has a 5-1/8" (130mm) maximum distance from center of muff to the hook. The minimum distance is set at 4-1/2" (114mm).

4 prong, one-side adjust, stainless steel clamp with cork cushion to protect your glassware.

C-Clamps are used in the lab for securing support stands to lab benches and for a multitude of other applications. Their frames are made with cast metal painted with corrosion resistant paint. The screw is steel plated. This is a 3" clamp.

The Versatile Holder, used with thermometers and tubes, is designed to be clipped on the lip of a beaker or other vessel. The Holder is made from heat resistant materials that will withstand temperatures up to 120?elcius The Holder is suitable for the following sizes of thermometers and tubes. …

This highly stable jack can be adjusted to any height between 2-1/2" to 10" (64mm to 254mm). The jack will accept loads up to 10 lbs. (45.4 kg). The unit is constructed of aluminum top and bottom plates with a baked-enamel finish and plated steel cross members. Height adjustments are achieved by…

L12R-4A : 1/2" X 4" Rod L12R-12A: 1/2" X 12" Rod L12R-24A: 1/2" X 24" Rod L12R-36A: 1/2" X 36" Rod L12R-48A: 1/2" X 48" Rod L12R-72A: 1/2" X 72" Rod L12R-84A: 1/2" X 84" Rod L12R-60A: 1/2" X…

Standard taper keck type joint clips Color coded for easy size identification Will not corrode or scratch glassware Can withstand temperatures up to 302°F (150°C)

LabJaws offers the largest selection of Lab-Frame Kits, Lab-Lifts, Rods and Support Stands in the industry to hold glassware safely. Whether you’re looking for a standard lab-frame or a customizable set-up, we have options to fit any space or application. Select from 13 pre-configured…

Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.

Durable stamped steel clamp with nearly 1" adjustable holder for a wide variety of rod sizes up to 19mm One flat jaw and one angled jaw for optimal holding of cylindrical objects Adjustable from 5.5" to 6" using centrally located tightening screw Spring loaded opening with thumbscrew opens to 2"…

Corning offers a 7/16" (1.1cm) diameter by 6 1/2" (16.5cm) support clamp for Corning Cat. No. 6795PR and 400188 temperature probes. Support has two openings, 1/3" (9mm) and 0.15" (3.75mm), for holding probes. It is designed to be used with a boss head clamp (Corning Cat. No. 440140) or standard…

Large grip adjustment range 3-prong construction Single or dual adjust Nickel-plated zinc Designed to securely hold every type of laboratory glassware and apparatus. Long, seamless nickle-plated brass tubing attaches clamp head securely and offers easy positioning in the deepest…

Easily attaches top most lab benches Frees up bench space Flexible support arm Support system easily attaches to the side of your lab bench or counter top, which helps utilize more space in your lab. Ultra Flex clamping system is extremely versatile and features a flexible arm that…

Nickel plated steel. Overall length 5".

This clamp features plastic coverd spring jaws. Accepts burettes up to 35mm OD, and support rods up to 0.5" OD. Available as a single or double burette clamp.

HIGH QUALITY Made of high quality stainless steel STABILITY Provides superb stability for experiments & setups THREADED Threaded end (10 x 1.5mm) fits in all Eisco bases GREAT FOR CLASSROOM & HOME LABORATORIES The durable and sturdy construction of this set makes it an…

Mounts to lab-frames or support stands Suitable for use in fume hoods 3 types of clamp heads Support system securely attaches to support stands, lab-frames, or any support rod up to 0.75” (1.9 cm) in diameter.  Ultra Flex clamping system is extremely versatile. Flexible arm…

Made of cast iron aluminum, these lab clamps are ideal for many applications on the bench or latticework. Heavy-duty 90 degree clamp designed to be more user friendly Larger knobs make hand tightening easier and provide sufficient pressure to hold rods securely Can be used on…

Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

Ring and rod are integrated with boss head clamp Boss head clamps rods up to 5/8" in diameter with metal thumb screw

Base is steel with black enamel finish. Removable rod is zinc-plated steel. Heavy-duty styles have an added steel plate on the back for extra weight.