Screw Clamp

Compare Tool

Select up to 3 products

Screw Clamp
1 - 32 of 202
Sort
View
Show
  • PR 648 Slot Blot Manifold

    GE Healthcare

    …make screening of many samples quick and easy. Filter DNA, RNA, or protein into clearly defined slots on nitrocellulose or nylon membranes. Clamp membranes securely with raised well edges to eliminate cross-contamination without O-rings or gaskets. Transfer samples from microplates to wells…

  • Screw Compressor Clamp, Standard Open-Jaw C-Clamp

    Humboldt

    Screw Compressor Clamp, Standard Open-Jaw C-Clamp without side post. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width

  • Screw Compressor Clamp, Closed Jaw (Hoffman)

    Humboldt

    Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

  • Screw Compressor Clamps: Open Jaw (Hoffman)

    Humboldt

    Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

  • Screw Compressor Clamp, Swivel Lower Jaw (Hoffman)

    Humboldt

    Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and…

  • Screw Compressor Tubing Clamps

    United Scientific Supplies

    Screw Compressor Clamps are made fo steel wire and nickel plated. Opens to either 3/4" or 1" and is available as a “closed” or “open” type.

  • Swivel Clamps

    Ohaus

    …extension clamps, the swivel clamps have an integral holder for attaching to a lab-frame or other apparatus. Built-in holder grips rods up to 19mm (0.75") in diameter and is adjustable for forward or reverse-facing adjustment screws. Shaft wing-nut allows the holding angle of the swivel clamp

  • Hosecock Extension Clamp

    Troemner

    …are designed to quickly start and stop flow to provide complete closure without damaging tubing. Operated with a simple squeeze operation. Constructed of nickel-plated zinc (unless otherwise noted). Adjustment screw with oversized head for accurate regulation. Built-in side lugs for foot mounting.

  • "Easy Grip" Screw Compressor Clamp, Closed Jaw (Hoffman)

    Humboldt

    Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.

  • Scienceware® Screw-Clamp Compressor and Swing Jaw™ Tubing Clamps

    Bel-Art Products

    …prevent tube from slipping out Swing Jaw™ Tubing Clamps For all fixed tubing Zinc-plated steel clamp provides non-slip closure for flexible tubes Knurled nut compresses against a swinging jaw with smooth clamping surfaces Can be installed or removed without disconnecting…

  • Clamp, Lattice

    Harvard Apparatus

    Of glass-filled nylon Has two open sides which take (and lock in place, at right angles) rods up to 1/2” (13mm) diameter Locking screws are M5 (5 mm) thread Allen set screws 1/2” (13 mm) long; without rod

  • Scienceware® Tubing Clamps

    Bel-Art Products

    Screw Clamp Offers on/off and fine control so accurate it replaces stopcocks in many applications Can be installed without disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm…

  • "Easy Grip" Screw Compressor Clamp, Swivel Lower Jaw (Hoffman)

    Humboldt

    Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.

  • Screw Compressor Clamp, Swinging Jaw Clamp

    Humboldt

    These safe, simple and strong tubing clamps can be used on thin or heavy-wall tubing. Made of plated steel, the clamps incorporate a large aluminum knurled adjusting nut.

  • Wall Clamp

    Ohaus

    Self tapping screw clamp secures small object to wall when no frames are available. 58 mm long with jaws adjustable from 5 to 10 mm. Wing nut clamp holds thermometer or other small glass apparatus.

  • "Easy Grip" Screw Compressor Clamp, Open Jaw (Hoffman)

    Humboldt

    Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.

  • Adjustable Clamp Holder

    GSC International, Inc.

    The clamp can be rotated 360 degrees and locked in place. Cast iron with nickel plated thumb screws.

  • Screw Compressor Clamp, Closed-Jaw C-Clamp

    Humboldt

    Screw Compressor Clamp, Closed-Jaw C-Clamp with Side post for tubing insertion. Jaw Opening: 0-7/8" (0-23mm) Max Height, 1-1/8" (30mm) Max Width

  • LabJaws Connectors & Holders

    Ohaus

    …zinc construction. Ideal for holding clamps to lab-frames. Use wherever clamping at 90° is required. Swivel Holders Two rod holders with center swivel capacity allow tilting of clamps at any angle in parallel planes. Outside adjustment screw allows close proximity between items being…

  • 12 Cylinder Bench Clamp

    Ohaus

    …safety message strap Bench clamp has two screw clamps to tighten for extra firm mounting to any flat surface up to 1.75" (45mm) thick with a 1.25" (32mm) overhang Especially convenient for temporary storage situations Rugged cast aluminum bench clamp features a 1" (25mm)…

  • Thumb Screws for Muff Clamps

    Humboldt

  • 3-Prong Clamps

    DWK Life Sciences (Kimble)

    Three-prong extension clamps hold objects ranging from 0.80 to 89 mm securely and safely. Two separate adjustment screws ensure even, precise pressure on glass to minimize the chance of breakage Clamp is easily adjusted to vary holding angle and distance from the stand Jaws are coated…

  • Labjaws Round Flask Clamps

    Ohaus

    Stainless steel worm-drive screw clamps have large, flat thumbscrews for fast and easy adjustment. Four sizes to accommodate 64 to 165 mm diameter apparatus.

  • Stainless Steel Ball & Socket Clamps

    Bal Supply

    Stainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints. All clamps are made of 304 –18/8 Stainless Steel.

  • Universal Clamp

    GSC International, Inc.

    Both sides of the clamp have screw type fitting that allow you to lock release or tighten as needed. The boss head clamp can be used on a stand rod up to 1.9 cm in diameter.

  • Lincoln Type Burette Clamp

    GSC International, Inc.

    A zinc plated, stamped steel clamp with steel thumb screws. Will accept rods up to 3/4" in diameter. The distance between the position of the burettes is 7.25".

  • Single Burette Clamp

    GSC International, Inc.

    Cast aluminum clamp with nickel plated steel thumb-screw. The clamps jaws have a range of 3/8" x 1-3/8".

  • EZ-Clamp Flask Clamps

    LabStrong

    …in mind. If you are a researcher who is tired of wasting time with the same old screw down, hard to load flask clamps with over stretched springs and stripped screws, then you need EZ-Clamps! EZ-Clamps do not screw down or over stretch. Instead, they powerfully adhere magnetically to LabStrong…

  • Shake Clamps

    DWK Life Sciences (Wheaton)

    …Shaker Flasks Clamps are carefully engineered to provide both clipping elasticity and motion resistance in one product. WHEATON Shaker Clamps feature a non-scratch design and are offered in a standard blue color accompanied by stainless steel screws and washers. The Clamps fit all industry…

  • Polypropylene Shaker Flask Clamps

    TriForest

    …polypropylene shaker clamps are carefully engineered to provide both clipping elasticity and motion resistance in one product. Featuring a non-scratch design, our shaker clamps come in standard blue color accompanied by stainless steel screws and washers. Our clamps fit all industry standard…

  • Aero-Seal Tubing Clamps

    …provides a pressure tight seal. Corrosion-resistant and extremely sturdy. Width of band is 14 mm. Clamps can be used in pairs to form larger diameter bands with screw drive on two sides; clamps need not be the same size. NOTE: Image might not represent exact model of product listed in clearance…

  • Gas Cylinder Clamps

    Ohaus

    Bench-Mounted Clamp (5592C10) Safety holder of cast aluminum for securing tanks 102 to 356 mm in diameter to bench or table in upright position Large cross-handle knob, which is easily turned by hand to tighten the clamping screw Large diameter rubber foot on screw prevents…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.