Tubing Clamp

… 2848W26 Mini Clamp is single position on-off clamp; for use with thin-wall tubing less than 3/16” o.d. 2848W30 Clamp is 15-position ratchet- type for one-hand, stepwise flow control or shutoff; for use with tubing from 1/8” to 7/16” o.d. 2848W34 Clamp is 12-position…

A great way to be prepared for your next clamping situation! Kit contains 5 each, of all 13 sizes, neatly organized in a polypropylene box with adjustable dividers.

Self closing brass test tube clamp with finger grips and without finger grips

The Humboldt Mfg. Co test tube clamp is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage.

…disconnecting tubing Molded of Delrin® plastic Clamp is autoclavable and resistant to acids, alkalis and organic solvents Accepts flexible tubing up to 14mm (1/2") O.D. Spring Tubing Clamp Squeeze control Perfect for flexible tubing Positive action, self closing clamp…

Screw Compressor Clamps are made fo steel wire and nickel plated. Opens to either 3/4" or 1" and is available as a “closed” or “open” type.

Test tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.

These brass Stoddard-style test tube clamps are available both with and without finger grips. We also sell test tube clamps made from nickel-plated steel . PRODUCT WARNINGS WARNING: This product can expose you to chemicals including nickel and lead, which are known to the State of…

This clamp is constructed from hardwood with a smooth finish and self-closing spring. The clamp will accept tubes up to 3/4" (19mm) in diameter. Overall length is 7" (178mm).

…RAMP CLAMP tubing clamps for easy, one-handed tubing flow control. Select standard taper clips (in plastic or lacquer-coated steel) or ball-joint clips for secure glass-to glass connections.Unique wheel-in-groove clamp design permits one-handed flow control. Simply remove wheel to insert tubing,…

Nickel plated steel. Overall length 5".

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

…tube from slipping out Swing Jaw™ Tubing Clamps For all fixed tubing Zinc-plated steel clamp provides non-slip closure for flexible tubes Knurled nut compresses against a swinging jaw with smooth clamping surfaces Can be installed or removed without disconnecting tubing

…steel EZ-Clamp Test Tube Rack Clamp (part number HR0005-6) is a universal test tube rack clamp. All of the LabStrong Test Tube Half Racks can be placed in the EZ-Clamp Test Tube Rack Clamp. The test tube rack clamp features finger-tightening knobs on each end of the clamp that allow for variable…

…with tubing and clamp LDPE Heavy duty LDPE carboys with 5 ft. of vinyl food grade tubing (1085 series) 1210D25 Supplied with 1/4" I.D., 3/8" O.D.  tubing, and use standard 15 position Dura-Clamp (7075-0000). Supplied with vented closures. Hose tubing can be clamped…

Flow Control Tube Clamp 1/2" Specifications: Max Tube Od 12 13mm Max Pressure Not Rated Temperature Range 32 To 200f Color White Opaque Material Acetal Sterilization Stem Autoclave Materials Meet Not Rated Tubing Use With Pvc Silicone Latex Rubber With A Durometer Of…

Can be gas or chemically sterilized 65 total pieces in 13 sizes One-piece, reusable clamp squeezes shut for a leakproof seal. Made of chemical/corrosion-resistant, rustproof nylon. Diameters range from 0.246 to 1.610 inches. Temperature range is 32 to 194°F/0 to 90°C.

Eppendorf™ Sticky Tape is an alternative to flask clamps for securing vessels to a shaker platform. Ideal for bottles and dishes or containers that cannot be held with conventional flask clamps Tape can be used at speeds of up to 200 to 300 rpm depending on flask size, orbit…

Sticky Pads are an alternative to flask clamps for securing vessels to a shaker platform Ideal for containers such as bottles and dishes that cannot be held with conventional flask clamps With flasks, these products can be used at speeds of up to 200 to 300 RPM depending on orbit diameter,…

…platform, with nonslip rubber mat, holds plates, dishes, boxes, etc. The microplate platform will accommodate up to four deep well microplates. The clamp platform has spring loaded retaining bars that hold flasks, bottles, racks, etc. in place. Time and speed are set and displayed on the large…

These safe, simple and strong tubing clamps can be used on thin or heavy-wall tubing. Made of plated steel, the clamps incorporate a large aluminum knurled adjusting nut.

The Clamp Hook locks into any position to support suspended thermometers, drying tubes and potash bulbs. The unit has an easy-adjusting check nut and has a 5-1/8" (130mm) maximum distance from center of muff to the hook. The minimum distance is set at 4-1/2" (114mm).

USP Class VI certified C-FLEX® tubing Accommodates both 2L and 4L bottles Male MPC connector with cap PureFit® tube clamp system Autoclavable *ADCF - Animal Derived Component Free **MPC - Medical grade Polycarbonate

Clamp with Hook can be rotated and locked in any position. Ideal for supporting suspended thermometers, drying tubes, etc. The clamp attaches to rods up to 13mm (1/2") O.D.

Desiccator Vacuum Tubing Kit. Vacuum Tubing Kit includes 1/4" ID and 1/2" ID vacuum tubing, each 48" long, two each 1/4" and 1/2" tubing clamps; 1/4" to 1/2" barbed reducer Kit allows connection of the Desiccator's 1/4" diameter brass needle…

…control. The clamp design features easy tube insertion for both manual and automatic operations. Molded of polypropylene suitable for ETO sterilization and is stocked in white. (Other colors available on special order).  Accepts approximately 1/4" to 1/2" OD tubing.   Mini…

…unique ratcheting pinch clamp for precise fluid flow regulation.  The innovative design allows for quick and easy installation on any tubing assembly, while eliminating the need to install on tubing prior to adding fittings and end connectors.  The holes in the clamp can be used with a zip…

Twin vinyl coated prongs support tubing and any other apparatus. Integral post holder for easy positioning accepts up to 2.1 cm diameter rod. 10 cm length.