Clamps/Supports

Compare Tool

Select up to 3 products

HomeAll Products

Ohaus Clamps/Supports

1 - 32 of 54
Sort
View
Show
  • OHAUS hand-operated inoculating turntables produce almost concentric circles of bacterial colonies that are evenly distributed across petri dishes. Cast iron turntables are coated with gray baked acrylic enamel. The 76 mm (3") high, small turntable accommodates 100 mm petri dishes. It has…

  • Large grip adjustment range 3-prong construction Single or dual adjust Nickel-plated zinc Designed to securely hold every type of laboratory glassware and apparatus. Long, seamless nickle-plated brass tubing attaches clamp head securely and offers easy positioning in the deepest…

  • LabJaws flow control devices offer selection and quality. They are finely machined to deliver accurate regulation or interruption of fluid flow. Every flow control device resists corrosion and rust. Hosecocks offer easy one-hand operation. Convex bearing surfaces and rounded edges protect tubing.…

  • Slide Staining Rack Constructed of stainless steel, the Talboys Slide Staining Rack will resist corrosion under normal use. Adjustable to fit trays or sinks up to 533mm (21") inside.

  • Used to hold apparatus near the lab-frame. Unlike extension clamps, the swivel clamps have an integral holder for attaching to a lab-frame or other apparatus. Built-in holder grips rods up to 19mm (0.75") in diameter and is adjustable for forward or reverse-facing adjustment screws. Shaft…

  • Chain Clamps

    Ohaus

    Holds large round or irregular shaped objects firmly, yet gently to lab-frames and rods. Quick and secure slip-on chain connection with large, easy-to-turn adjusting knob. Extension arm allows user to vary distance from the frame. Available as stainless steel clamp constructed entirely of stainless…

  • Cylinder Stands Model 701 PVC Coated Stand ( 1217M41) The PVC coated stand has a flat bottom support so it can't "ride up" on the cylinder. Includes an adjustable 1" (25mm) wide, 54" (1372mm) long nylon strap with nickel-plated, non-slip spring catch and buckle…

  • Used to hold apparatus near the lab-frame where no adjustment is required after set-up. Built-in holder grips rods up to 19mm (0.75") in diameter Fixed-Position Clamps have an integral holder but can be rotated after attachment to a lab-frame or other apparatus. Available in 2-prong or…

  • Ideal for supporting funnels, round bottom flasks, reaction vessels, and other apparatus that requires lower support. Opening in PVC coated aluminum ring allows for easy removal of sample container. PVC coating protects glassware. Long extension arm permits depth adjustment of the open ring from…

  • LabJaws offers the largest selection of Lab-Frame Kits, Lab-Lifts, Rods and Support Stands in the industry to hold glassware safely. Whether you’re looking for a standard lab-frame or a customizable set-up, we have options to fit any space or application. Select from 13 pre-configured…

  • Two-prong single adjust style tightly controls distances between glassware. Clamp swivels 360° and locks securely into position. Two jaw sizes; one up to 65 mm; the other up to 80 mm. 20 cm center to center distance.

  • Exceptional stability and control Stainless steel construction Seven sizes for any application Autoclavable and chemical-resistant Heavy-duty stainless steel lab-lifts are very stable lifting platforms that offer exceptionally high strength and durability. Constructed of…

  • 3 types of clamp heads Flexible arm Versatile support kit features a flex arm that can be placed in virtually any position or angle. Kit includes 12” (30.5 cm) flex arm and interchangeable 3-prong clamp, 2-prong clamp and spring clamp heads.

  • Aluminum plate supports beakers, mantles and petri dishes. Fits standard lab-frames using connectors or holders.

  • Ultra Clamps

    Ohaus

    Strong Aluminum Alloy Fitted with Over-sized knobs Rods supported on 4 inch long surface to avoid vibration and wobble

  • Regular Clamp Holders Stainless steel electro-polished finish or nickel-plated zinc construction. Ideal for holding clamps to lab-frames. Use wherever clamping at 90° is required. Swivel Holders Two rod holders with center swivel capacity allow tilting of clamps at any angle in…

  • Heavy-duty, top-of-the-line rods provide maximum strength and durability. Constructed of 303 stainless steel.

  • Stainless steel worm-drive screw clamps have large, flat thumbscrews for fast and easy adjustment. Four sizes to accommodate 64 to 165 mm diameter apparatus.

  • Cast iron support stand bases are constructed with black enamel finish for chemical resistance and durability. All bases feature a built-in support rod holder with locking knob that accepts a 0.51" (13 mm) diameter support rod. U-shaped base features three built-in support rod holders and…

  • Strong and resisilient fiberglass rods will not corrode or rust. Structurally strong and resilient to clamp compression scars.

  • Model 704 Adjustable Stand Heavy-duty, cast aluminum stand with adjustable "L" brackets hold cylinders from 6 to 9.25" (152 to 235mm) in diameter. Hinges open for installation without lifting the cylinder or disturbing connections. Prevents accidental tipping. Hinges open for…

  • Wide adjustment range Autoclavable Stainless steel Polished finish Dual Adjustable Clamps are durable, multi-purpose clamps constructed of stainless steel and offer excellent chemical resistance and overall strength. The versatile 3-prong design secures a variety of lab apparatus…

  • Twin vinyl coated prongs support tubing and any other apparatus. Integral post holder for easy positioning accepts up to 2.1 cm diameter rod. 10 cm length.

  • 13 mm aluminum rods have threaded end with locknut for direct installation into channel. Comes with channel coupler for use in both regular and short form steel channels.

  • Wall Clamp

    Ohaus

    Self tapping screw clamp secures small object to wall when no frames are available. 58 mm long with jaws adjustable from 5 to 10 mm. Wing nut clamp holds thermometer or other small glass apparatus.

  • Holds glass tubes or thermometers from 6 to 13 mm diamter. Swivel lock adjusts from any angle through 360°. Distance from thermometer to support rod in 99 mm. Overall length is 122 mm. Integral post holders for easy connections.

  • Stainless steel electro-polished finish or nickel-plated zinc construction. Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress the scissor-like mechanism, insert buret and gently release to grip. Numbers and graduation on buret remain easy to read. For height…

  • Firmly grasps glass distillation columns of varying sizes and odd-shaped glassware Constructed of stainless steel with strong, chromed-brass band and chain Offers a 152mm (5.98") long extension arm The flat thumbscrew/worm-drive design permits maximum tightening and quick removal

  • Easily attaches top most lab benches Frees up bench space Flexible support arm Support system easily attaches to the side of your lab bench or counter top, which helps utilize more space in your lab. Ultra Flex clamping system is extremely versatile and features a flexible arm that…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.