Joint Clamps

Compare Tool

Select up to 3 products

Joint Clamps
1 - 32 of 162
  • These stainless steel, corrosion resistant clamps use strong spring closed forced jaw designed for securing standard taper joints.

  • Stainless steel Pinch clamps are for use with O-ring and ball and socket clamps All sizes except 1236D18 and 1236D20 have screw locking devices. Only screw locking clamps are recommended for O-ring joints. All clamps are made of 304 –18/8 Stainless Steel.

  • SYNTHWARE Joint Clamps

    Kemtech America

    Joint Clamp, Standard Taper, Plastic, Synthware, Various Joint Sizes Available.

  • …temperatures above 100°C, fiberglass covers. The prong height of the UltraJaws Heavy-Duty Clamps make them ideal for use in holding and securing glassware with precision ground glass joints. Large grip adjustment range Single or dual adjust Available in three sizes; small,…

  • clamps, rings, tripods, etc. as ordinarily used for supporting glassware assemblies. Size 75 are provided with a locking device in addition to the spiral spring. Size 102 has flat hinge and spiral spring between the upper and lower jaws which permit adjustment of the clamp over the joint

  • S/J Joint Clamps


  • Stainless Steel Standard Taper Joint Clamps

    DWK Life Sciences (Kimble)

    A Standard Taper clamp made of corrosion-free stainless spring wire.

  • Arsine Generator with Clear-Seal™ Joint

    DWK Life Sciences (Wheaton)

    …specifications Arsine absorber (1140L18) has a socket joint Scrubber tube (1140L22) has a standard taper 24/40 Clear-Seal™ joint and a spherical 12/2 ball joint held together by a size 12 stainless steel ball joint clamp Manufactured from WHEATON 33 low extractable borosilicate…

  • Securely hold joints, with corrosion-free stainless steel spring wire.

  • …tapered clamps are designed to hold large vessels with ground glass joint necks. Clamps are constructed with extension rods for easy attachment to lab-frames and other apparatus. Nickel-plated zinc construction. NOTE: An additional holder must be purchased in order to attach clamps to frames…

  • Joint Spring, Stainless Steel, Synthware, Coil Length: 6.35, 25.0 and 32.0mm available.

  • Stainless Steel McCarter Reaction Clamps

    Wilmad-LabGlass - SP Scienceware

    Used to connect two pieces of glass with flat flanges of the same diameter, these stainless steel horseshoe-shaped clamps are uniquely designed. Adjustable tension springs that secure even pressure over the flange area, may be slid on or off easily - thus facilitating assembly and disassembly of…

  • Keck® Joint Clips


    General Description Color coded, Delrin ® plastic joint clips will not scratch glassware or corrode. Withstand temperatures up to 302 °F (150 °C). Resistant to concentrated alkalis and diluted acids; not resistant to halogen gases or concentrated acids. Legal Information …

  • Nickel-plated steel clips. For standard taper joints. Superior chemical and temperature resistance. Temperature up to 932 degrees F.

  • Color-Coded Joint Clamps

    DWK Life Sciences (Wheaton)

    Color-coded clamps hold standard taper joints securely under moderate pressure Molded from polyoxymethylene (POM), an acetal resin Will not scratch glass and can withstand temperatures up to 150°C Resistant to bases and weak acids Not resistant to halogen gases and concentrated acids

  • PTFE molded clamps with a steel core can withstand temperatures up to 250° C and are totally chemically resistant and inert.

  • Plastic Joint Clips

    Bal Supply

    Standard taper keck type joint clips Color coded for easy size identification Will not corrode or scratch glassware Can withstand temperatures up to 302°F (150°C)

  • Vacuum Trap Kit with Spherical Joints. Includes trap body, top adapter, middle adapter, bottom adapter, and clamps. Body OD: 50mm, Body Length: 360mm

  • Conical Flange Vessel Clamp

    Wilmad-LabGlass - SP Scienceware

    This clamp is designed for reaction vessels/kettles with a conical flange. The top clamp is easily removed without disturbing the cover or body of reaction flask. Disassemble by loosening nuts. Includes extension rod for clamping to a laboratory stand. NOTE: Use with LG-8010 to LG-8050 vessels…

  • …rotary evaporator for use with any laboratory stirring motor. Hollow glass or stainless steel shaft with 14/20 or 24/40 ends. Micro version with hollow glass and 14/40 inner joint available. Complete item supplied with joint clamp. Does not include stirring motor, chuck, flask or splash guard.

  • U.S. patent #2,388,633 fabricated from aluminum. This type clamp affords a positive, uniform clamping pressure.

  • Two-piece unfinished aluminum clamp with PTFE gaskets and brass tightening bolts. Code -03 fits our 7646-18 75mm o-ring joint and our 7519 (76mm) filter support assembly. Code -05 fits our 7519 (102mm) filter support assembly and our 6504 kettles with

  • clamps, and clips will not scratch glass or corrode—ideal for glass and tubing assembly. All KECK products are color-coded for fast, easy size identification. Use quick disconnect adapters for safe, convenient tubing-to-tubing or tubing-to-glass connections. Use RAMP CLAMP tubing clamps for…

  • …ball joint adapter. Medium clamps have fixed screw action and open to 1 3/4” (45 mm) for tubes, flasks, columns and larger rods. 8847T08 Clamp has extension stem 6” x 3/8” diameter (150 x 9.5 mm); 8847T10 Clamp has male connector; 8847T12 has ball joint adapter. Large clamps

  • …Velcro straps allow the clamping of a wide range of glassware from 20 mm to 60 mm in diameter. Users have a choice of two support rods, both 12 mm in diameter: the 650 mm one-piece rod and the two-piece 650 mm split rod. The split rod has a threaded joint halfway along its body, which…

  • …reaction vial with standard taper outer joint externally threaded at opening to allow an o-ring cap seal connection with mating male joints. This connection type eliminates the need for clamps while offering the positive, leak-tight seal of ground glass joints. Vials include drilled cap with o-ring…

  • Clear fused quartz socket joint. For clamps see CG-150.

  • KF/NW25 flange centering ring.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.