Hose Clamp

Compare Tool

Select up to 3 products

Hose Clamp
1 - 32 of 37
Sort
View
Show
  • Hose/Tubing Clamps

    Thomas®

    …and plastic tubing Made of chemical/corrosion-resistant, non-conducting nylon One-piece, reusable clamp squeezes shut for a leak proof seal pressing the side releases the clamp May be chemically or gas-sterilized for biomedical or food applications Use within temperature range: 32…

  • stop-it Metal Hose Clamps

    Bürkle

    …heat resistant and sturdy. The hose clip is available in four different sizes, for hose diameters up to max. 30 mm. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the hose clip stop-it's knurled…

  • Circulator Hose Support

    Ace Glass

    All stainless steel, fully adjustable clamps for securing and supporting circulator hoses used with jacketed pilot plants. The universal clamps adjust to any pipe style pilot plant stand, and the clip will accommodate any standard circulator hose size.

  • Sanitary Pressure Filter Holders, Stainless Steel

    Advantec MFS

    …PTFE coated photoetched stainless steel filter support screen for autoclaving with filter in place. Fittings are 1.5" with tri-clamp to 14.3mm hose barb. Unit comes standard with silicone o-ring. Other materials are available. Seal membrane by hand tightening locking wing nuts. Advantec offers…

  • CLAMP FOR 1/4" & 3/16" ID HOSE 10/PK

    Welch

  • CLAMP FOR 13/16" ID HOSE 10/PK

    Welch

  • CLAMP FOR 7/16" ID HOSE 10/PK

    Welch

  • CLAMP FOR 5/8" ID HOSE 10/PK

    Welch

  • Scienceware® 28-Piece Fittings Kit

    Bel-Art Products

    …or FDA grade Kit contains: 6 Straight Tubing Connectors, 7 Stepped Tubing Connectors, 5 Wye (Y) Tubing Connectors, 3 "T" shaped Tubing Connectors, 5 Quick Disconnects and 2 flow control Plastic Tubing Clamps Plastic organizer box has room for adding other fittings and parts

  • stop-it Hose Clamps

    Bürkle

    …heat resistant and chemical resistant plastic PVDF. The clamp is galvanised steel. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the hose clip stop-it's knurled screw, a stepless, delicate flow…

  • CLAMP FOR 1-5/8" ID HOSE 10/PK

    Welch

  • Hose/Tubing Clamp Assortment Kit

    Thomas®

    Can be gas or chemically sterilized 65 total pieces in 13 sizes One-piece, reusable clamp squeezes shut for a leakproof seal. Made of chemical/corrosion-resistant, rustproof nylon. Diameters range from 0.246 to 1.610 inches. Temperature range is 32 to 194°F/0 to 90°C.

  • 3-Way 3/8" Hose Barb Tee

    Across International

    Premium quality stainless steel 3/8" hose barb 3-way tee for secure vacuum connection. Now you can hook up multiply rotary evaporators or vacuum ovens to one pump, or multiply pumps to one evaporator or oven to draw a faster and deeper vacuum.

  • Carboy, Low-Density Polyethylene Tubing & Clamp 6.5 Gallon

    Dynalon

    …food grade  tubing (1085 series). Supplied with 1/4" I.D. x 5/8" O.D. tubing and a 12 position Dura-Clamp(TM) ( 1212X09 ) attached. Supplied with vented closures. Hose tubing can be clamped out of the way when not in use. Maximum temperature for low-density Polyethylene is 80°C.

  • Carboys w/Tubing & Clamps

    Dynalon

    …and clamp LDPE Heavy duty LDPE carboys with 5 ft. of vinyl food grade tubing (1085 series) 1210D25 Supplied with 1/4" I.D., 3/8" O.D.  tubing, and use standard 15 position Dura-Clamp (7075-0000). Supplied with vented closures. Hose tubing can be clamped  out…

  • Wall Bracket Demineralizer

    Barnstead

    Holds Barnstead Hose Nipple Cartridges without clamps Slot at front permits observation of indicator color change. With two screws for mounting.

  • Sub-ambient Cooling Kit for TGA 8000 and PYRIS 1 TGA

    PerkinElmer

    Includes the TGA 8000 Sub-ambient Cooling Tube (N5370333), Hose clamps (09903004) and tubing (02506518) for connecting the Cooling Tube to the Chiller, and Instructions. When combined with the Chiller Accessory (N5370220 for 120V operation or N5370221 for 220 Volt operation) provides the ability to…

  • High Vacuum Pump Deluxe Experiment Kit

    Fischer Technical

    …water boiling at room temperature as well as what happens to a balloon at high vacuum plus much more! Vacuum Pump Kit-, 1EA. LAV-3/G, 1EA. acrylic pump plate, 1EA. 6"X11" glass bell Jar, 5' HIGH VACUUM TUBING, 2 hose clamps, 1 quart high vacuum pump oil, 3EA. balloons, 1EA. petri dish

  • Plastic Separatory Funnels

    Thermo Scientific Nalgene

    …stopcocks and Tefzel® ETFE screw closures. Closure and stopcock are leakproof. Funnels are autoclavable except for stopcock assembly, which can be chemically disinfected. Can be used with mechanical shakers if hose clamp is put over stopcock. Closure size 53 mm; stem length below stopcock 65 mm.

  • Gelmaster Gel Dryer Vacuum System

    Welch

    …to 15 drying cycles before draining the system. Each system comes complete and ready to use with 5' of PVC vacuum tubing, in-line stopcock, hose clamps, detachable line cord and trapping medium (1 L). Dimensions (L x W x H): 15.5" x 11.25" x 14", weight: 33.5 lbs. If your gel dryer is not listed…

  • Jacketed Indented Cylindrical Reaction Vessel with Flat Flange

    Wilmad LabGlass

    …reaction vessels have four indentations for improved stirring. They are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. Jacket has 1/2" hose connectors. NOTE: Uses LG-7316 clamps.

  • Jacketed Cylindrical Reaction Vessels with Flat Flange

    Wilmad LabGlass

    …sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus preventing any weakening that might occur with a sharp shoulder. Jacket has 1/2" hose connectors. NOTE: Uses LG-7316 clamps.

  • Laboratory High Vacuum Pump

    Fischer Technical

    …desiccators, and many more applications. Pumps achieve an ultimate vacuum of 25 microns in laboratory conditions. Tubing with 2ea. hose clamps, 1/2"ID.  For use with all Fischer Technical "LAV" series high vacuum pumps. High Vacuum Pump Oil Designed specifically…

  • SC150 Immersion Circulators

    Thermo Scientific

    …between 0.1 and 0.01 and between °C — °F — °K Acoustic and optical alarm Auto-Restart feature after power failure Includes: 8mm and 12mm hose barbs with clamp (–0016, –0018, –0011 only), pump plug for external circulation, 6ft. power cord.

  • Refrigerated Shaking Bath

    Lindberg/Blue M

    …plus identical dimensions for the refrigeration system. Includes independent power cords for bath and refrigeration system. Two 5-ft Hoses with worm gear clamps are included for customer connection of bath to chiller unit. For thermometer (sold separately) order 0220C87. Stainless steel gable cover…

  • Carboys

    Dynalon

    Clamp, 5 Gallon ( 1212U50 ) High-density Polyethylene square shaped carboy with 60" of vinyl food grade tubing (#1085 series) 3/8" I.D., 1/2"  O.D. and supplied with a standard 15 position ( 1212X10 ) Dura-Clamp(TM). 5 gallon capacity. Supplied with vented closures. Hose

  • Cyanide Distillation Apparatus

    DWK Life Sciences (Kimble)

    …The first bubbler acts as a scrubber to remove sulfides. Cyanide is absorbed in the second bubbler. Apparatus includes inlet tube, reflux body, cold-finger condenser, 1000 mL flask with center and side necks, hose adapter, scrubber tube, scrubber flask, absorber flask, dispersion tube and clamp.

  • Amber Desiccators

    Plas-Labs

    … Units are constructed of optically clear acryli Each cubicle has two nylon gas nipples 1/8 x 1/4 NPT hose barb fitting (90° elbows) Slip-a-part hinges are standard Sealing clamps are spring loaded for uniform tension Built in hygrometer-(RH) All units have acrylic door guards to…

  • Multiple Cubicle Desiccators

    Plas-Labs

    … Units are constructed of optically clear acrylic Each cubicle has two nylon gas nipples 1/8 x 1/4 NPT hose barb fitting (90° elbows) Slip-a-part hinges are standard Sealing clamps are spring loaded for uniform tension Built in hygrometer-(RH) All units have acrylic door guards to…

  • Clear Desiccators

    Plas-Labs

    … Units are constructed of optically clear acrylic Each cubicle has two nylon gas nipples 1/8 x 1/4 NPT hose barb fitting (90° elbows) Slip-a-part hinges are standard Sealing clamps are spring loaded for uniform tension Built in hygrometer-(RH) All units have acrylic door guards to…

  • 47 mm Screen, Filter Support, S / S

    DWK Life Sciences (Wheaton)

    …have a #2 hose connection for 1/4# (6mm) I.D. tubing Designed for filtering viscous or proteinaceous solutions or to produce ultraclean filtrate Includes a 316 stainless steel support with 120 mesh screen, PTFE support screen gasket, support base, 300mL graduated funnel, anodized clamp and a…

  • Cylindrical Jacketed Reaction Vessels with O-Ring Flange

    Wilmad LabGlass

    These cylindrical borosilicate glass reaction vessels are jacketed with 1/2" hose connections. They have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. NOTE: Use LG-7316 clamps.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.