Rod Connector

Compare Tool

Select up to 3 products

Rod Connector
1 - 32 of 48
Sort
View
Show
  • Stainless Steel Closed Lab Rod Connector

    Lee Engineering

    Accommodates (1/2") rod. Locked with 14"-20 hex screws.

  • Labjaws Connectors and Mounting Brackets

    Ohaus

    …lab frame rods at 90° angle. Twin angled screws allow independent rod adjustment and easy access. Nickel plated cast zinc construction. Multi-Rod Connector (2824E43) Maximum adjustment capability within one connector. Two adjustment rods fit into the oval hole in the connector,

  • Stronghold Support 360 Rotation Connectors

    Harvard Apparatus

    rod or extension clamp stems of 3/8” or 1/2” (9.5 or 13 mm) diameter. 8847E37 Connector similar to 8847E35, except that two caps are identical and both take rods or extension clamp stems of 3/8” or 1/2” diameter. Both connectors include two threaded handles for securing rods.

  • Frame Connectors, Hooks & Support Apparatus

    Ohaus

    …constructing lab-frames or other supports requiring the connection of two perpendicular rods. Clamp connects two 13 mm (0.51") rods at a 90° angle and features separate adjustment screws for each rod location. Lab Frame Foot Stainless steel electro-polished finish or nickel-plated…

  • Open Lab Rod Connector for Lab Frame Assemblies

    Lee Engineering

    Joins rod frames in different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 14"-20 hex screws. Stainless steel. Handle…

  • Nylon Open Type Connector

    Lee Engineering

    Nylon Open type connector for 1/2" Rods with hex head bolt Corrosion-resistant; they will not corrode or rust Accommodates (1/2") rod Locked with nylon hex head bolt

  • Lattice Connectors

    Bal Supply

    …connecting lattice rod supports for laboratory apparatus. These spherical designed connectors assure rigidity, solidity and freedom from breakage. The U-shaped slots on each side take standard ½ inch rod and make possible many combinations of rod supports. The axial hole permits rods to be joined at…

  • Aluminum Quick Action Lattice Connector

    Lee Engineering

    Joins 1/2" Rod frames Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm

  • Nylon Closed Connector

    Lee Engineering

    Nylon Closed connector for 1/2" Rods with hex head bolt Corrosion-resistant; they will not corrode or rust Accommodates (1/2") rod Locked with nylon hex head bolt

  • Connector, Open-Sided

    Harvard Apparatus

    …glass-filled Nylon with stainless steel thumbscrew shafts Holds rods or clamp stems up to 1/2” (13 mm) diameter at right angles to each other Open-sided; can be removed without disturbing support Includes two thumbscrews and 1/2” (12 mm) swivel adapter. Without rods.

  • Stainless Steel Vertical Base Plate

    Lee Engineering

    For anchoring of 1/2" lattice frame.

  • Rod Coupler, Stainless Steel

    Lee Engineering

    Extend the length of your lab frame rods. This strong, corrosion-resistant aluminum alloy connector permits end-to-end joining of 12.7 cm rods in diameter. Precision machining ensures rod alignment. Comes with two tee handles for adjustment.

  • Zinc Swivel Base Plate

    Lee Engineering

    1/2" diameter rod can swing in one plane 22 1/2 degrees in each direction.

  • Connector, T-Type

    Harvard Apparatus

    …that have a male connector to vertical lattice rods or laboratory stands One end has open side to clamp rod up to 1/2” (13 mm) diameter and lock with thumbscrew. Opposite end has female socket 3/4” (19 mm) deep that takes male connector or butt end of rod up to 1/2” (13…

  • Rod Coupler, Aluminum

    Lee Engineering

    Extend the length of your lab frame rods. This strong, corrosion-resistant aluminum alloy connector permits end-to-end joining of 12.7 mm (1/2") rods in diameter. Precision machining ensures rod alignment. Comes with two tee handles for adjustment.

  • Lattice Lab System, Set #3

    United Scientific Supplies

    …foot plate (6), Anchoring Screw for foot plate (18), Hook Connector with Thumbscrew (42), Support rod 2" long, 1/2" diameter (10), Support Rod 18" long, 1/2" diameter (3),  Support Rod 36" long 1/2" diameter (2), Support Rod 48" long 1/2" diameter (10).

  • Zinc Lattice Connectors

    Lee Engineering

    Joins rod frames in the same or different planes. Open throat construction permits rods to be lifted out without having to be pulled through. Setups can remain unchanged when shifting individual members. Accommodates 12.7 mm (1/2") rod. Rods are locked with 1/4"-20 hex screws. Non ferrous…

  • Stronghold Lattice Frame Mounting Kits, 78 X 39 (2000 mm X 1000 Mm)

    Harvard Apparatus

    …6 rods, 20” long, 7 rods, 39” long, 3 rods, 78” long, 24 lattice clamps, 6 lattice mounts, 3 tee connectors, 3 male/female hinged adapters, 3 large connectors, 360° and 1 Allen wrench 8846F12 Deluxe Bench Mounting Kit includes 3 rods, 20” long, 7 rods, 39”…

  • LabJaws Connectors & Holders

    Ohaus

    …nickel-plated zinc construction. Ideal for holding clamps to lab-frames. Use wherever clamping at 90° is required. Swivel Holders Two rod holders with center swivel capacity allow tilting of clamps at any angle in parallel planes. Outside adjustment screw allows close proximity between…

  • Clamp, Lattice

    Harvard Apparatus

    Of glass-filled nylon Has two open sides which take (and lock in place, at right angles) rods up to 1/2” (13mm) diameter Locking screws are M5 (5 mm) thread Allen set screws 1/2” (13 mm) long; without rod

  • Lattice Lab System, Set #2

    United Scientific Supplies

    …for foot plate (12), Hook Connector with Thumbscrew (26), Support rod 2" long, 1/2" diameter (8), Support Rod 18" long, 1/2" diameter (2), Support Rod 24" long, 1/2" diameter (5), Support Rod 36" long 1/2" diameter (2), Support Rod 48" long 1/2"…

  • Lattice Lab System, Set #1

    United Scientific Supplies

    …18" support rods with 2" support rods and the foot plates to form a secure base. More 2" rods and two 24" rods form a strong angle brace to maintain the lattice upright. Contents: (4) Foot Plate, 2-5/16” diameter (22) Hook Connector

  • Connector, End-to-End

    Harvard Apparatus

    …steel thumbscrew shafts For joining rods of the same or varying diameters, end to end Takes rods up to 1/2” (13 mm) diameter Center barrier within connector prevents rods from touching Each rod held by separate thumbscrew Includes two thumbscrews. Without rods.

  • Labjaws Lab-Frame Kits

    Ohaus

    …Lab-Lifts, Rods and Support Stands in the industry to hold glassware safely. Whether you’re looking for a standard lab-frame or a customizable set-up, we have options to fit any space or application. Select from 13 pre-configured lab-frame kits (connectors and feet included) to rods which can…

  • Square Section Work Holder

    Harvard Apparatus

    …vise and rod clamp for securing rectangular objects to support rod Alternately, can be used to support a rod vertically on water bath wall or in-line with top Takes objects up to 3/4” (19 mm) thick and has thumbscrew with cushioned tip to prevent damage to object. Rod clamp socket…

  • Talboys Support Rod and Clamp Kit

    Troemner

    …for holding temperature probes, thermometers or other glass tubes. Includes an 18" (45.7cm) aluminum support rod, thermometer/temperature probe extension clamp, 3-prong medium swivel clamp, and hook connector. Recommended for Professional, Advanced or Basic Hotplates or Hotplate-Stirrers.

  • Connector, Closed

    Harvard Apparatus

    …shafts For connecting two rods up to 1/2 inch (13 mm) diameter at right angles or parallel to one another Can be positioned anywhere along length of rod Rods held in place by separate thumbscrews Two of these connectors can be used together to produce three-dimensional…

  • Stronghold Support Hinged Adapters

    Harvard Apparatus

    connector or the butt end of 1/2” (13 mm) rod Male connector can be used to mount hinged connector on lattice rod or laboratory stand by means of closed connector, open-sided connector or “T” connector Hinged adapters are offered in three combinations of male connector

  • Lattice Mount

    Harvard Apparatus

    Of glass-filled nylon For mounting a lattice rod parallel to a surface: to floor, shelf, wall, etc. Open-sided connector has base with two countersunk screw holes Takes any rod up to 1/2” (13 mm) Rod is held in place by thumbscrew; without rod

  • Ultra Flex Support System With Lab Frame Connector

    Ohaus

    … Suitable for use in fume hoods 3 types of clamp heads Support system securely attaches to support stands, lab-frames, or any support rod up to 0.75” (1.9 cm) in diameter.  Ultra Flex clamping system is extremely versatile. Flexible arm can be placed in virtually any position…

  • Support Rods Stainless Steel

    Ace Glass

    303 stainless steel support rods, 13mm (1/2") O.D. for use in place of aluminum or fiberglass. For use with all standard laboratory connectors.

  • Radleys Starfish Monifolds, Clamps and Support Rods

    Heidolph

    …allows manifolds to be located in any position on any standard 12 mm diameter support rod or lab scaffolding. Quick release connectors on inlet/outlets make attaching of tubes quick and easy. Connectors also feature leak-proof shutoff valves, that automatically close when the couplings are…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.