5plts/pk 10/pks/cs

23A00U182: Optimize your testing with our full skirt, 40ul, 384 well PCR plates; reduce reagent volumes while improving speed and efficiency in your lab. Plates are constructed from low extractable, medical grade polypropylene and frosted to minimize fluorescence from your block. The full skirt…

23A00U199: Clear Zone adhesive free 96-well film Our 50µm thick clear polypropylene film has 96 adhesive free wells. Clear Polypropylene is laid over a white backing for high contrast and low cross talk. Using the two (2) end tabs and 96 circles for alignment makes it easy to quickly…

23A00U136: Mid-height, 24.4mm 96-square well U-bottom plates maximize 1mL sample and storage. Plates utilize 30-40% less vertical space in freezers, automated loaders, under the hood, and other locations where space is at a premium. Plates have stacking lugs to help prevent toppling. These plates…

The individual “v” bottoms of this reservoir reduce reagent waste by minimizing dead space.  This reservoir is designed to take a range of liquid handling configurations from 8 or 12 channel pipettes through to 96 or 384 pipette heads.  Overall volume is 165mL. Our sturdy…

Comes in standard 8x12 configuration, molded in alpha-numeric position markings Each well offers a working volume of 200ul Uniform wall thickness Rigid automation friendly design compatible with stackers, grippers, heater/cooler blocks ANSI/SLAS 2004-1 (SBS) compliant footprint Assay…

23A00U147: Our black flat bottom 384-well assay plates are ideal for general (non-tissue culture) applications including microbiology, serology, and fluorescence assays. These completely black, polystyrene, flat bottom assay plates provide the best signal:noise ratio in top-read fluorescence. They…

ILP’s sterile, filtered, and low binding alternative to the Rainin LTS® and XLS® pipette tips.  Are precision molded utilizing USP Class VI virgin polypropylene.  Our thin wall design, low bind surfaces, and tight quality specifications produces a tip with consistent…

23A00U190: Full volume 12-channel reservoir. Our 256mL multi-channel reservoirs with 12 (22mL) V-bottom channels, offer full volume in an automation friendly design. Sturdy and warp resistant, ultra-flat and rigid construction, with a stable base, this reservoir is ideal for manual or automated…

23A00U159: Glass coated, polypropylene deep well plates. The 200nm thick coating of silicon dioxide creates a cradle of non-binding and inert glass to protect your sample. This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the sample from any potential compounds…

The Innovative Laboratory Products universal fit lid is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality, polypropylene material which ensures durability and long lasting usage.

23A00U153: Our sterile, black, flat bottom, 96-well assay plates with lid are ideal for general (non-tissue culture) applications including microbiology, serology, and fluorescence assays. Made of polystyrene, these plates are solid black and opaque in color with no transparency, quenching light…

23A00U170: Our 96-tip magnetic covers are ideal for magnetic bead-based nucleic acid and protein affinity purification performed on automated magnetic particle processing systems. Uses include viral RNA extraction, DNA extraction, quantification, and immunoprecipitation. Combs are made of inert,…

FIltered Universal Pipet Tips from ILP are used to prevent cross-contamination in laboratory liquid handling. Certified DNase-, RNase, DNA/RNA-, Pyrogen-Free Filters Made of Virgin Hydrophobic Polyethylene Tips Made of USP Class VI Virgin Polypropylene Molded-in Graduations for…

Optimize your signal with our full-skirt low profile, 96-well 0.1mL PCR plate.  It works equally well for manual or automated protocols.  The short well design optimizes assay conditions by reducing the distance between sample (in the well) and heated lid. By eliminating evaporation on…

Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films.  Manufactured from virgin polyproplyene and certified to be free of RNase, DNase, and Pyrogen contamination. Deep Well Plates offer: Ultra-flat surfaces …

This Raised rim, ABI "Fast Plate" style 96-well PCR plate is made using only ultra-clear, virgin, medical grade polypropylene.  Uniform thin-wall design allows for optimized heat transfer.   Available with: 1149L32: Use with most Advanced Biosystems (ABI) 0.1mL…

Pre-slit wells prevent probe damage and eliminate the risk of coring Printed alpha numeric Soft, supple, and compliant silicone seals tightly Mat can be reused Compatible with a wide range of chemicals and aggressive solvents

23A00U143: Our 7mm round well V-bottom plate combines optimized sample recovery with automation friendly design. Sturdy and warp resistant, with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening, mixing, and…

23A00U192: Full volume 12 trough reservoir. Our 290mL single well reservoirs with 12 V-bottom troughs, offer full volume in an automation friendly design. Sturdy and warp resistant, ultra-flat and rigid construction, with a stable base, this reservoir is ideal for manual or automated applications.…

Our 10.0mL 24-well plate is ideal for growing bacterial protein cultures and for sample purification with magnetic beads utilizing manual and automated systems. The unique square top with round bottom design allows for optimum mixing and enhanced recovery of magnetic beads. Separated round well…

23A00U186: Barcoded and designed for qPCR and compatible with the ABI real time systems our 0.1mL ABI "Fast Plate" style, PCR Amplification Plate is constructed from low extractable, medical grade polypropylene; frosted to minimize fluorescence from your block. The elevated skirt design…

Low profile, 96-well 0.1mL PCR plate with no skirt.  This universal plate design is compatible with all standard 0.1mL block thermal cyclers.  Plate is easily oriented with corner notches and molded in alpha numeric.  It is suitable for manual procedures but lacks gripping areas for…

23A00U158: Our tallest plate (63mm), boasts a huge 15.0mL volume per well. This 24-well plate is ideal for very large sample sizes, growing bacterial cultures, and for sample purification with magnetic beads utilizing manual and automated systems. The unique square top with conical V-bottom…

23A00U201: Permanent seal for enhanced traceability and seal integrity. These extremely clear polyester films offer a thick, extra strong seal, and a large writing/labeling surface. Not easily removed, these seals are designed for storage applications where sample traceability and seal integrity is…

Packaged in resealable bags All ILP PCR products are non-sterile and certified to be free of detectable RNase, DNases, DNA, and pyrogen contamination. Durable bands between the wells keep these strips ridged, easy to handle, and durable.  Sections of tubes will not inadvertently break…

4-well strips of tube and cap for use with Rotor-Gene®, working volume: 100 μl Features Optically clear strips idel for qPCR ILP frosted cap plugs allow for perfect for labeling or writing. Designed for use on Qiagen/Corbett Rotor-Gene® instruments Individual tube…

23A00U197: Gas permeable film for culture growth, cell assays, and cell screening. A 125µm thick porous seal formed by layers of non-woven rayon/acrylic fibers. This hydrophobic and gas permeable layer has average pore size from 10µm to 40µm, is backed with a medical-grade (non-cytotoxic)…