23A00U159: Glass coated, polypropylene deep well plates. The 200nm thick coating of silicon dioxide creates a cradle of non-binding and inert glass to protect your sample. This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the sample from any potential compounds leached from the plastic. The plate design: Round wells with U-bottom design for optimum mixing Separated round well bottoms allow for the use of ring or post style magnetic plates. Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films Manufactured from class VI polypropylene (no mold release agents or regrind) Certified to be free of RNase, DNase, and Pyrogen contamination. Surface Treatment: SiO2 Maximum Volume: 1.4mL Working Volume: 1.2mL Volume with Mat: 800ul Matching silicone cap mats: DPMATR-750-PRT, MAT-RD-750-PTFE, SLT-RD-750-PRT, SLT-RD-750-PTFE Plates are packaged and sold 10 per case (individually wrapped)
23A00U160: Glass coated, polypropylene deep well plates. The 200nm thick coating of silicon dioxide creates a cradle of non-binding and inert glass to protect your sample. This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the sample from any potential compounds leached from the plastic. The plate design: Round wells with U-bottom design for optimum mixing Separated round well bottoms allow for the use of ring or post style magnetic plates. Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films Manufactured from class VI polypropylene (no mold release agents or regrind) Certified to be free of RNase, DNase, and Pyrogen contamination. Surface Treatment: SiO2 Maximum Volume: 1.4mL Working Volume: 1.2mL Volume with Mat: 800ul Matching silicone cap mats: DPMATR-750-PRT, MAT-RD-750-PTFE, SLT-RD-750-PRT, SLT-RD-750-PTFE Plates are packaged and sold 10 per pack, 10 packs per case (individually wrapped)
23A00U161: Glass coated, polypropylene deep well plates. The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample. This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the sample from any potential compounds leached from the plastic. The plate design: Unique square top with round bottom design allows for maximum volume, optimum mixing, and enhanced recovery Separated round well bottoms allow for the use of ring or post style magnetic plates. Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films Manufactured from class VI polypropylene (no mold release agents or regrind) Certified to be free of RNase, DNase, and Pyrogen contamination. Surface Treatment: SiO2 Maximum Volume: 1.4mL Working Volume: 1.2mL Volume with Mat: 800ul Matching silicone cap mats: DPMATS-9-PRT, MAT-SQ-96-PTFE, SLT-SQ-96-PRT, SLT-SQ-96-PTFE Plates are packaged and sold 10 per case (individually wrapped)
23A00U162: Glass coated, polypropylene deep well plates. The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample. This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the sample from any potential compounds leached from the plastic. The plate design: Unique square top with round bottom design allows for maximum volume, optimum mixing, and enhanced recovery Separated round well bottoms allow for the use of ring or post style magnetic plates. Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films Manufactured from class VI polypropylene (no mold release agents or regrind) Certified to be free of RNase, DNase, and Pyrogen contamination. Surface Treatment: SiO2 Maximum Volume: 1.4mL Working Volume: 1.2mL Volume with Mat: 800ul Matching silicone cap mats: DPMATS-9-PRT, MAT-SQ-96-PTFE, SLT-SQ-96-PRT, SLT-SQ-96-PTFE Plates are packaged and sold 100 per case (individually wrapped)
23A00U163: Glass coated, polypropylene deep well plates. The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample. This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the sample from any potential compounds leached from the plastic. The plate design: The mid-height 384 well square top with pyramid V-bottom design offers high density storage and maximizes sample recovery. Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films Manufactured from class VI polypropylene (no mold release agents or regrind) Certified to be free of RNase, DNase, and Pyrogen contamination.
23A00U164: Glass coated, polypropylene deep well plates. The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample. This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the sample from any potential compounds leached from the plastic. The plate design: This shared wall 8.5mm round well U-bottom plate combines optimized mixing and storage with automation friendly design. Sturdy and warp resistant, with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening, mixing, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Mid-height to maximize storage, utilizing 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. Plates have stacking lugs to help prevent toppling. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Made from class VI Polypropylene; no mold release agents or regrind RNase, DNase, DNA, and Pyrogen Free Certification
23A00U165: Glass coated, polypropylene deep well plates. The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample. This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the sample from any potential compounds leached from the plastic. The plate design: This shared wall 8.5mm round well U-bottom plate combines optimized mixing and storage with automation friendly design. Sturdy and warp resistant, with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening, mixing, and combinatorial chemistry applications. It is compatible with stackers, grippers, heater/cooler blocks and other instruments that comply with the ANSI/SLAS 2004-1 (SBS) footprint. Mid-height to maximize storage, utilizing 30-40% less vertical space allowing for more storage in freezers, automated loaders, under the hood, and other locations where space is at a premium. Plates have stacking lugs to help prevent toppling. Raised rims on each well help protect from cross contamination, minimize sample loss during storage, and make for enhanced sealing with adhesive films, silicone mats, or heat-sealing films. Made from class VI Polypropylene; no mold release agents or regrind RNase, DNase, DNA, and Pyrogen Free Certification
23A00U166: Glass coated, polypropylene deep well plates. The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample. This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the sample from any potential compounds leached from the plastic. The plate design: Unique square top with round bottom design allows for maximum volume, optimum mixing, and enhanced recovery Separated round well bottoms allow for the use of ring or post style magnetic plates. Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films Manufactured from class VI polypropylene (no mold release agents or regrind) Certified to be free of RNase, DNase, and Pyrogen contamination.
23A00U167: Glass coated, polypropylene deep well plates. The 200nm thick coating of silicone dioxide creates a cradle of non-binding and inert glass to protect your sample. This SiO2 coating helps to: Reduced binding Increase chemical resistance Protect the sample from any potential compounds leached from the plastic. The plate design: Unique square top with round bottom design allows for maximum volume, optimum mixing, and enhanced recovery Separated round well bottoms allow for the use of ring or post style magnetic plates. Raised rims on each well make for easy and secure sealing with adhesive films, silicone mats, or heat sealing films Manufactured from class VI polypropylene (no mold release agents or regrind) Certified to be free of RNase, DNase, and Pyrogen contamination.