Use Thermo Scientific™ Orion™ AQUAfast Tablet Reagents with Orion™ AQUAfast colorimeters and Thermo Scientific™ Orion™ AquaMate Vis and UV-Vis spectrophotometers. These convenient, rapidly dissolving tablets can be precisely added to samples without leaving residual…

Protects water baths and other water systems against the growth of algae, bacteria, molds and biofilms. Just 2ml per liter of water adds a blue tint which will fade after about 3 months reminding you to change the water and add new conditioner. Protects pumps and thermostats and helps…

For Environmental Studies For determining life-supporting chemistry of fresh-water environments, including ponds, lakes, streams, rivers and marshes Tests for: carbon dioxide, D.O., hardness, nitrate, trace phosphates, wide-range pH and silica Includes water sampling bottles, report forms and…

Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…

The LaMotte 0 - 15 ppm ColorQ nitrate TesTabs are suitable for use with ColorQ and ColorQ 2x test kits. They are mainly used in research facilities and chemical laboratories to conduct wide range of experiments. They are easy and convenient to use.

QUANTOFIX Peroxide 100 semi-quantitative test strips for the determination of hydrogen peroxide (H 2 O 2 ) and peroxides in solutions. Measuring range: 0-1-3-10-30-100 mg/L H2O2

The Free Chlorine and pH Analyzer test kit is designed to measure Free Chlorine levels from 0.5 to 10.0 ppm and pH from 6.8 to 8.2. The Free Chlorine and pH tests are measured using tablet reagents with a convenient DipCell comparator. The kit includes easy to read multilingual (English,…

Octet Comparator Method For determining cadmium in water using Dithizone method; commonly occurs from the deterioration of galvanized pipe Octet comparator has color standards representing 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0 ppm cadmium. For use only where organic matter is absent and…

Method: colorimetric with test strips and reagents 2 - 5 - 20 - 50 - 100 mg/l Mn MQuant™ UN Number: UN3316 Storage class: 8B Non-combustible, corrosive hazardous materials Storage: Store at +15°C to +25°C. Hazard: Corrosive The manganese test can be…

Storage: Store at +15°C to +25°C. Precautionary Statement(s): P201: Obtain special instructions before use. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313: IF exposed…

DPD Powder Pop® Dispenser with tests for Chlorine Compact and convenient Redesigned dispenser prevents clogging Dispense into round or square cuvettes Push button operation for precise dosing Portable dispensers accurately deliver the correct volume of DPD reagent for…

UN Number: UN3316

QUANTOFIX Glucose semi-quantitative test strips for the determination of glucose content. Measuring range: 0-50-100-250-500- 1000-2000 mg/L glucose

QUANTOFIX Sulphate semi-quantitative test strips for the determination of sulphate in solutions. Measuring range: 200->400->800->1200- >1600 mg/L SO42-

Precautionary Statement(s): P280: Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if…

UN Number: UN3316

Insta-TEST® Chlorine Dioxide is a convenient way to test for Chlorine Dioxide levels in sanitized water. Range and sensitivity is 0, 10, 25, 50, 100, 250, 500 ppm. Range and sensitivity is 0, 0.25, 0.5, 1, 3, 10 ppm.

Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron…

Sulfides are naturally present in ground waters as a result of leaching from sulfur-containing mineral deposits. Surface waters do not usually contain high sulfide concentrations. Sulfides result from the decomposition of organic matter, from bacterial sulfate reduction under anaerobic conditions…

Method: photometric 1.0 - 60.0 mg/l SO₃² - 0.8 - 48.0 mg/l SO₂

Insta-Test® strips are available to perform checks for water quality factors. Test strips are a quick way to monitor water without having to use reagents.

The hydrogen peroxide equivalence is 1 drop = 50 ppm. The peracetic acid equivalence can be modified to test different concentrations by using a different sample size. The result is a 1 drop = 6, 15, or 300 ppm equivalence.

Low-level ammonia nitrogen may be naturally present in water as a result of the biological decay of plant and animal matter. Higher concentrations in surface waters can indicate contamination from waste treatment facilities, raw sewage, industrial effluents (particularly from petroleum refineries),…

Octet Comparator For determining silica in natural and industrial waters Employs modified APHA Method 425D Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10.0 ppm silica Sufficient for 50 tests

UN Number: UN3316

Spectroquant ® Prove 300: a robust UV/VIS spectrophotometer for sensitive measurements, such as the analysis of drinking water and beverages.

Hydrogen peroxide is a strong oxidizing agent with a variety of uses. Applications include the treating of industrial effluents and domestic waste and serving as a disinfectant in aseptic packaging. For the food and beverage industry, CHEMetrics Hydrogen Peroxide CHEMets® and…

Hydrion pH Indicator Solution kits feature specially formulated concentrated indicator solutions. Just one drop of the indicator solution added to 4 ml. of sample solution will provide an accurate ph reading, displayed in bright easy to view colors. 1-11 Hydrion pH Wide Range Indicator…

This kit tests for nitrate nitrogen using tablet reagents and the Octa-Slide 2 Comparator. Range/sensitivity is 0, 1, 2, 4, 6, 8, 10, 15 ppm NO₃ - -N Applications: Drinking Water, Environmental Education, Food and Beverage, Industrial Water Boiling and Cooling,…

This kit tests for nitrite using the direct reading titrator method. Range/sensitivity is 0-1000 ppm/20 ppm NaNO₂ Applications: Industrial Water Boiling and Cooling, Water and Wastewater