Chlorine Test Kit

Compare Tool

Select up to 3 products

Chlorine Test Kit
1 - 32 of 113
Sort
View
Show
  • Portable Colorimeters

    Oakton

    …the same sample. Chlorine and cyanuric acid measurements don’t require calibration. Chlorine measurements are based on EPA-approved DPD method. Specially formulated reagents provide accuracy, repeatability and stability. Meters can perform more than 3,000 tests on a single set of…

  • Orion AQ3070 AQUAfast Chlorine Meter

    Thermo Scientific Orion

    The new Orion AQUAfast AQ3070 chlorine meter kit features quick and easy free and total chlorine testing for EPA reporting over the range of 0-2 mg/L. This meter can measure up to 4.0 mg/L level - with the same reagents! The expanded range for free and total chlorine measurements gives you a real…

  • Chlorine (Hypochlorite) CHEMets Kit, Range: 0-12.5%

    CHEMetrics

    …percent (%) NaOCl. Range: 0-12.5% as NaOCl MDL: 2.5% Method: DPD (hypochlorite) Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Comparator, 25 mL sample cup, Sample Prep Cup, 3.0mL syringe, 25uL…

  • Chlorine (Free & Total) CHEMets® Kits

    CHEMetrics

    Test kits that employ this chemistry are well suited for use where biocides and chromate corrosion inhibitors are used simultaneously. DDPD reacts with free chlorine to form a purple product. When ammonia or amines are present in the sample, some of the chlorine may exist as combined chlorine. To…

  • Chlorine-pH Combination Test Kit

    LaMotte

    …DPD chlorine Octet Comparator has color standards representing 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, and 6.0 ppm Cl2 Phenol red Octet Comparator has color standards representing pH 6.8, 7.0, 7.2, 7.4, 7.6, 7.8, 8.0 and 8.2 Sufficient for from 100 to 200 determinations, depending on test

  • DC1500 Chlorine Colorimeters

    LaMotte

    …using proper wavelength and DPD test method to meet EPA design specifications for NPDWR and NPDES chlorine monitoring programs (EPA 330.5 and Standard Method 4500). The DC1500 Chlorine Colorimeter Kit includes tablets for 100 tests or liquid reagents for 140 tests, six sample vials, and a sturdy…

  • DPD Chlorine - Bromine - pH Test Kit

    LaMotte

    Kit Contains: 100 Chlorine DPD #1 Tablets 50 Phenol Red Tablets 3 Test Tubes, 2.5, 5, 10 mL, plastic w/ caps 1 Chlorine/Bromine Octa-Slide 2 Bar 1 Phenol Red Octa-Slide 2 Bar, pH 6.8-8.2 1 Octa-Slide 2 Viewer

  • DPD Free & Total Chlorine Reagents

    Lovibond

    …DPD reagents and will provide accurate results with Lovibond, Hach® and other manufacturer’s spectrophotometers, colorimeters and test kits. Lovibond Powder Pack Reagents are: US EPA accepted for reporting drinking water analysis Easier to Handle -- Our design…

  • DPD Chlorine Tablets

    LaMotte

    …free, combined, and total chlorine in a simple test sample. DPD chlorine tablets designated “Instrument Grade” are suitable for use with colorimeters and spectrophotometers. For more information on chlorination and measurement of chlorine, order The Chlorine Handbook (Thomas number…

  • Insta-TEST® Total Chlorine, pH, Total Hardness & Iron Test Strip Kit

    LaMotte

    …Chlorine/pH/Hardness and Iron test kit combines the best of both worlds. The kit includes 25 quick, easy and accurate tests using a simple dip-and-read formulation. The strips are packaged in a unique hinged, waterproof PopTop bottle with a desiccant liner that protects the test strips from…

  • Model CN-67 Chlorine (Free & Total) and pH Test Kit

    Hach

    …comparator for monitoring chlorine and pH, the Free & Total Chlorine and pH Test Kit provides more accuracy than test kits using color cubes. One of Hach's most popular test kits Includes color discs and a comparator box for monitoring chlorine and pH Kit contains all required…

  • SpecCheck Secondary Gel Standards Set

    Hach

    …Standards Kit for Mid Range DPD Chlorine Methods. Contains a blank vial and 3 colored vials at ~0.2, ~1.5, and ~3.5 mg/L Cl2. Ready-to-use SpecCheck Secondary Standards Kits include four 10-mL (1-inch) sealed glass cells with a blank and three different standards within the typical testing range,…

  • Chlorine EndPoint ID® Test Kits

    Thomas®

    …industry, chlorine tests are used to control bio lm in cooling systems. These tests use the iodometric drop test method or the DPD method to detect free and total chlorine. In the cleaning and sanitation industry our chlorine test kits are used to verify the concentration levels of chlorine. They…

  • AquaComparator Test Kit Line

    Lovibond

    Low Cost, Easy to use kits for testing a wide range of water quality Parameters Continuous gradient color disks provide accurate measurements—no need to “extrapolate” between discrete color blocks Rotate the color wheel to obtain a color match with the reacted sample and read your result in…

  • Chlorine Test Kits

    LaMotte

    …representing 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0 ppm Cl Sufficient for 50 tests DPD Tablet Octa-Slide (9859H12) For determining free and total chlorine in water Sufficient for 50 tests Employs DPD tablet method: EPA-accepted method for NPDWR Octa-Slide has color…

  • DPD Free Chlorine Powder Pillows 5ml

    Hach

    DPD Method, Free Chlorine Reagent Powder Pillows Pack of 100 For use with Hach's Chlorine Visual Test Kits Sample Size: 5 mL Range: up to 3.5 mg/L Cl2 Backed by over 20 years of DPD experience!

  • Chlorine Single Parameter Kits

    Hach

    …Hach chlorine tests have been accepted by the U.S. Environmental Protection Agency for reporting purposes. Test kits containing DPD colorimetric reagents are used most often for monitoring potable water, swimming pools and waste effluent. Kits for determining higher levels of chlorine use…

  • Chlorine Bleach Test Kit

    LaMotte

    Applications: Industrial Water Boiling and Cooling, Water and Wastewater This test kit measures for Chlorine Bleach using the Direct Reading Titrator method. Range/sensitivity is 00-10%/0.2% Cl.

  • Chlorinated Alkaline/Alkaline EndPoint ID® Test Kits

    Thomas®

    …Applications Our chlorinated alkaline test kit is used to verify the concentration levels of chlorinated alkaline/alkaline cleaners used in the cleaning and sanitation industry. It can be used with chlorinated alkaline/alkaline CIP cleaners, foaming chlorinated alkaline/alkaline cleaners…

  • Test Kit Chlorine

    LaMotte

  • Chlorine Testing Dispenser

    HF Scientific

    …precise dosing Portable dispensers accurately deliver the correct volume of DPD reagent for free or total chlorine testing. Supplied with enough DPD powder for 100 tests. Easy-to-use design for 5 and 10 mL sample sizes. Thomas numbers 9864H98 and H99 are for test kits using tablet technology.

  • Chlorine/pH Dip Cellkit

    LaMotte

    The Free Chlorine and pH Analyzer test kit is designed to measure Free Chlorine levels from 0.5 to 10.0 ppm and pH from 6.8 to 8.2. The Free Chlorine and pH tests are measured using tablet reagents with a convenient DipCell comparator. The kit includes easy to read multilingual (English,…

  • DPD Chlorine Liquid

    LaMotte

    …per test than tablets Quicker results and clearer colors than tablets DPD 1A and 1B reagents are added to a 5 or 10 mL sample to test free chlorine. DPD 3 reagent is added to the reacted sample to test total chlorine. The 30 mL size provides 144 tests and the 60 mL size provides 288 tests.

  • Chlorine And Chloramines Test Kits

    LaMotte

    …total chlorine, monochloramine and dichloramine in water Employes DPD tablet method Standard range: Octa-slide has color standards representing 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 and 3.0 ppm Sufficient for 50 tests Direct Reading Titrator (9859K40 and K41) For determining high range chlorine

  • Chlorine/Bromine Test Kit

    LaMotte

    Applications: Industrial Water Boiling and Cooling This test kit measures for Chlorine or Bromine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl or Br.

  • Chlorine Dioxide EndPoint ID® Test Kits

    Thomas®

    Cleaning & Sanitation Applications Our chlorine dioxide test kit are used to verify the concentration levels of chlorine dioxide sanitizer used in the cleaning and sanitation industry. It can be used to test concentration levels for hard surface sanitizing, cooling towers and environmental…

  • MColortest™ Chlorine Test Reagent Cl2-1

    MilliporeSigma

  • Chlorine Bleach Test Kit

    LaMotte

    For determining available chlorine in chlorine bleach or hypochlorite solutions Range: 1 drop = 0.005%, 0.05% or 0.5% Cl Sufficient for 50 tests at 0.1, 1.0 or 10%

  • Test Kit Chlorine Dioxide

    LaMotte

  • Test Kit Chlorine Dropper Pipet

    LaMotte

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.